Did you open the Ruby Console while performing steps? Error msgs ?

Hello everyone, Here is an image showing the rebar schedule present in the model. The table is fully dynamic: when I click on a row, the corresponding rebar is automatically highlighted in the model [image: 1773055139464-sketchucation_09.03.2026.png]

Hi Fredo, I use Curic Section nowadays, but I've been following FredoSection with interest and will try it fully when I have the time. Still I have a feature request: Could you consider the idea of multilayered offsets from Section. Imagine following scenario: Group has Masonry material applied. Face inside Group has Plaster material applied. FredoSection would create a Section fill with Masonry hatch and an inset of 2cm from the edge that matches the Plaster material, where a Plaster hatch would be applied. If the masonry wall would have several faces painted with plaster, then all these faces would create a plaster offset hatch when sectioned. If you want to make this outstanding, then that plaster offset could be a multiple offset representing several layers: Masonry Group - Section Fill is Masonry Ventilated Façade on external Face - Aluminium 1cm + Air gap 2cm + Insulation 6cm + Waterproofing 0.25cm + Mortar 2cm. Plaster material on internal Face - Plaster 2cm The Object is still painted as Masonry But section would be: Interior Space | Plaster 2cm | Masonry Xcm | Aluminium 1cm + Air gap 2cm + Insulation 6cm + Waterproofing 0.25cm + Mortar 2cm | Exterior Space Xcm would be the leftover value after subtracting these multiple layers offsets.

Version 2.1.2 - 03.07.2026 Added Weight Callouts as an option for polyline stemwall assemblies. Added Weight Callouts as an option for stemwall step assemblies. [image: 1772931102941-foundation_su143_800.jpg] [image: 1772931102968-foundation_su144_800.jpg] For this detailed breakdown you need to have the "separate callouts" and "weight callouts" both enabled.

@alsomar said in [Plugin] QuadFaceTools: You see the model unsmoothed in 3ds Max just because your SketchUp model has unsmoothed lines. Despite the SubD subdivisions making the surface look smooth, if you can see the edges it means the lines are actually unsmoothed. In this frame I can see all the lines Nope. They are soft = false; smooth = true. The smooth attribute is the one actually welding the normals/creating smoothing groups. The soft is a Sketchup-thing only to separate "logical surfaces" which can be selected with a single click. In the legacy version of the exporter, the generated obj from 3dsMax was seen as 2 overlapped meshes: one with the properly welded/smoothed quads (BUT unwelded UV seams between each quad, despite the individual quads being perfectly in place in the UV chart) + one made of floating/unwelded triangles. In Blender the legacy exporter always worked fine (didn't test your fork against Blender, but I guess it could work fine). Another weird/interesting thing is that the same objects, when exported straight out of WrapR work 100% fine. [image: 1772915685108-16a21a1c-6526-4849-b21e-4f0317e7d105-image-resized.png]

If it works in v2024 [see earlier posts] it'll probably work in v2026. Try it. To install an extension from a ZIP archive file rather than from an RBZ you will need either to change the file-type suffix, or even easier use the SketchUcation submenu item to install it from Archive, which works for both RBZ and ZIP archives...

Hi, Thanks for this smart plugin! FYI it works on SU2023. Regards

Very nicely done, something of an epic going by looks alone.

The current LibFredo6 works with all recent versions of Sketchup. There is also a legacy version in the PluginStore for older versions - i.e. <= v2016

What are 'the error messages' ? A BugSplat or something else ? What is your MAC OS ? Select its icon and right-click > context-menu > Run as administrator. A dialog opens, when prompted choose Repair. This will fix any incorrect permissions etc that can cause unpredictable issue. Restart SketchUp to see if anything has improved. Repair will not affect any customization. Double-clicking

[image: 1772710088959-mahn-gard-su.jpg] [image: 1772710133547-ek330.jpg] [image: 1772710302399-image1-resized.jpg] [image: 1772710302499-image2-resized.jpg] [image: 1772710302657-image3-resized.jpg] and the pano: http://doerr.bplaced.net/visu/mhn-gard1/

@Rich-O-Brien said in SketchyPhysics 3.5.6 (26 January 2015): is a huge undertaking Of course I was thinking about "cheat-coding"

Nice, a breakdown would be cool!

@Rich-O-Brien Thank you Brian. Second course was offset. Had to remove and reset start setback (half stone)for it + Layout from start to change ; ) Again, -thank you for sorting out. [image: 1772479795775-spacerssolved.png]

I am between fear and hope ! Bep

Version 1.1.9 - 03.01.2026 Updated the draw floor tool with a more robust "face" draw option. Updated the draw opening tool with a more robust "face" draw option. Updated the draw flooring tool with a more robust "face" draw option.

The 'require' code that is unneeded doesn't break anything, just takes a millisecond to process and immediately ignore, slowing the loading time all but imperceptibly... Have a good day too...

Another site with learning tools for those who wish to. AI, not required. https://www.horoma.school/course#hero