1. Home
  2. Categories
  3. SketchUp Discussions
⚠️ Important | Libfredo 15.6b introduces important bugfixes for Fredo's Extensions Update

Subcategories

  • The ideal place for beginners to get help using SketchUp
    9k Topics
    60k Posts
    Rich O BrienR
    @dkuucharzak said in Username change: @Rich-O-Brien, I misspelled my intended username. Could you help me change it? I can if the one you need is available. Send a mail to support@sketchucation.com and we sort it out

  • No decsciption available
    209 Topics
    2k Posts
    soloS
    Hey guys I am desperate for very high resolution/quality satellite maps, I use Placemaker and I also use Nearmap but the resolution is not that great, I have tried using AI to upscale but that too does not really solve my issues. Is there another solution?

  • No decsciption available
    821 Topics
    4k Posts
    T
    Hey Mike, I'm sure you figured this out already, but when you first create the attribute type a number with the inch mark like 0" or 0' in the value box and hit enter. This will set the unit for that attribute to inches. This only works for the first time a value is entered. After that first initial value, you will need to use the attribute info dialog to make changes. In addition, you can use 0 to set it to text (not "Default: Text") and 0cm to set it to centimeters. If anyone knows a shortcut for setting the unit to Decimal Number, I would love to hear it!
Log in to post
Load new posts
  • B

    How to export a SU model to a GIS software

    sketchup
    2
    0 Votes
    2 Posts
    4k Views
    U
    What's your SU version, and What QGIS version? There used to a shp tool very long ago. Also have just found this, which may be a solution, or a path to one: https://forums.sketchup.com/t/importing-shapefiles-shp-to-sketchup-skp/59032/10 I can't help you more than that at moment. Haven't used SU for a while so it looks like folk are still doing interesting things with it.
  • R

    Transfer 'color by layer' to 'color by material'

    sketchup
    6
    0 Votes
    6 Posts
    1k Views
    TIGT
    Let's wait a day or two until it gets fine tuned...
  • J

    Covert to Components?

    sketchup
    4
    0 Votes
    4 Posts
    806 Views
    J
    Perfect, thanks!!
  • M

    Follow Me problems with non radial curves

    sketchup
    11
    0 Votes
    11 Posts
    2k Views
    M
    Yep! I totally agree. I wish that the new versions of sketchup would not always default to the newest version to save. This is really why. This constantly causes me trouble when I go to use a computer connected to a CNC cutter I have access to. Have to remember to save as ver 2015 or it just doesn't work. And I suspect it's forced obsolescence, not a mandate that the versions be incompatible. Aaargh! Oh and Pilou, that 6 is exactly the kind of thing I'm working from! That much I have, it's when the center of the bottom loop of the 6 becomes a closed cone that I get my problems.
  • F

    Triple click not working with outliner open

    sketchup
    12
    0 Votes
    12 Posts
    2k Views
    oceanembersO
    Can't replicate here, using 2018.
  • J

    Push/Pull through a Group or Component Plugin?

    sketchup
    5
    0 Votes
    5 Posts
    834 Views
    J
    Hi, Sorry for my slow response. I want to thank slbaumgartne - that worked perfectly. Also want to thank Box - thats perfect too. Makes my life easier too! Thanks to Juju also. Best of luck John
  • M

    How would you go around modelling this chair?

    sketchup
    3
    0 Votes
    3 Posts
    656 Views
    M
    What is your go-to plugin to turn lines into tubes for such chair? I can't find one that would connect all the pipes smoothly.
  • B

    Paint without clicking each face

    sketchup
    9
    0 Votes
    9 Posts
    1k Views
    B
    @pbacot said: Does the "shell" command work for this? I am not familiar with the tool. Can you perhaps look at the one part and guide me if possible ?
  • R

    Partial wall demo

    sketchup
    6
    0 Votes
    6 Posts
    949 Views
    R
    Just an update...It was a lot of trial and error but I got it to work! I feel so accomplished. I would make a note to any others trying to do this (or maybe I am the only knucklehead) that the "animation" does not show up when switching between scenes on the tray but only when switching between scenes on the tabs above the drawing window. Can't tell you how many times I would redraw and switch at the tray only to be very disappointed. However, best way to learn! Won't make that mistake again. Anyway, thanks again for your help!!
  • M

    Estimator for Sketchup V2 - CSV Report Bugsplat

    sketchup
    5
    0 Votes
    5 Posts
    2k Views
    jujuJ
    @michaelsiggers said: I wish it would be fixed. If not, can I get a refund? John Brock has a forum for his products, this is probably a question that should be asked there as he's the only person able to answer that.
  • C

    Style Stroke Width (Sketchy Edges)

    sketchup
    53
    0 Votes
    53 Posts
    9k Views
    maxhouserocksM
    excellent results. i am bothered by the overlay diluting too. I am going to do some new background images for general use here. thanks for everything. where else do you share resources and ideas besides the link above? thanks, bob
  • P

    Problem with stl file for 3D printing

    sketchup
    3
    0 Votes
    3 Posts
    710 Views
    P
    @box said: The main problem is your hole isn't a hole. Should it go all the way through or is it a cavity? Is the size critical, as in, can it be slightly narrower so that it hits the flat bottom correctly? Thanks for drawing my attention to that. I looked at the drawing in Freecad and it appeared to look OK - until I read your response and looked at it again in wireframe. That showed strange extra faces, but I never thought it was to do with the hole being of larger diameter than the bottom face. I reduced the hole size and now it exports fine. Looks like I will have to rethink the design as the hole size needed is for tapping, and re-drilling before tapping the 3D printed output may not be satisfactory. We'll see. Thanks again
  • P

    EGPU's and Sketchup

    sketchup
    6
    0 Votes
    6 Posts
    3k Views
    K
    @jakemm said: Does the GPU actually make much of a difference to SketchUp itself? I've heard conflicting comments, and I guess with the eGPU it's easy to see the difference as you can just unplug it. I just tested 2 scenario's using the CrowdTest 3dModel from the 3dWarehouse. First: Laptop with eGpu connected (gtx1080) with two large monitors. Biggest Scene(11) runs fine - eGPU 40% used (Task Manager) Disconnecting the eGpu while running SketchUp crashes SketchUp (and Unreal etc). Makes sense though. Second: Laptop running on its own (integrated gpu), only laptop display. Already in smaller scenes SketchUp is showing simplified geometry instead of the people. Big delays while switching between people and the simplified geometry. So for me, and the dual external monitor setup, already in SketchUp it's a big difference. I can just focus on my work and don't get annoyed that much by SketchUp's performance (unless I run a plugin while the Outliner is open, or LayOut is freezing for half a minute while updating etc.) It will depend though on your models. I rarely exceed 500k edges.
  • B

    File got pretty large...now, cannot open.

    sketchup
    2
    0 Votes
    2 Posts
    3k Views
    J
    Have a look and see if your RAM is running out. If it is - make sure you close all internet tabs, photoshop and as many other programs as you can. Also try and reduce the size of the SketchUp window to as small as possible while the file is opening - to the size of a postage stamp if possible. This reduces the demand on the computer and has helped me open files in the past that were too large. Then after it has fully loaded, you can gradually increase the size of the window and trim some of the file size out by clearing out some of the model and re-saving the file.
  • F

    Exploding groups and components does not go to layer0

    sketchup
    3
    0 Votes
    3 Posts
    1k Views
    gillesG
    Default Layer Geometry by TIG https://sketchucation.com/plugin/1675-default_layer_geometry
  • E

    Plugin suggestion - show only parent

    sketchup
    3
    0 Votes
    3 Posts
    911 Views
    E
    @pixero said: Not sure I understand how it would work. Let's say you have three grouped boxes that are made into a group. What would be shown since the "parent" only is a group with subgrouped geometry inside? The parent doesn't contain any geometry. I imagine that if one group with one of the boxes is active, the other grouped boxes (inactive) would be shown as well, because they're also children of the big group that contains all three boxes. Anything in the model that's out of the parent group, would be hidden. I think such feature could be helpful in many situations with complex models where groups contain grouped groups etc.
  • D

    Creating a framed structure from solid shape or surface.

    sketchup
    5
    0 Votes
    5 Posts
    2k Views
    pilouP
    As you deform your object with FFD before use SubD the parts on the surface will be different!
  • Mike AmosM

    Startup issue.

    sketchup
    11
    0 Votes
    11 Posts
    7k Views
    Mike AmosM
    Follow and rotate was the culprit.
  • C

    Automate Sketchup Scenes to Layout?

    sketchup
    2
    0 Votes
    2 Posts
    2k Views
    Dave RD
    Create a SketchUp template with a "dummy model" and scenes set up to show the desired views of the model. Then create a LayOut template that uses the scenes from your template for the various viewports making sure you don't modify the scenes in LayOut. Set the scale as needed for the viewports. Use the Sketchup template for modeling. When you are ready to create the LayOut document, open LayOut, select the LO template and, in Document Setup>References, relink the SKP file from the dummy model to your project model. As long as the scenes have the same names and are not modified, the viewports will show the project model. Here's an example from one of my LO templates. The template opens like this: [image: pvB2_Screenshot-11_21_201811_56_08AM.png] And, after relinking the SKP file to the project SKP file, those viewports look like this: [image: G7VE_Screenshot-11_21_201811_56_26AM.png] FWIW, the project title is Auto Text. While I'm in Document Setup, I add the title and it auto fills in the places needed.
  • K

    Changing the layout of different sized objects equidistantly

    sketchup
    3
    0 Votes
    3 Posts
    2k Views
    K
    Hadn't heard of that one before. Has some nice functionality but unfortunately it's not enough for this situation. The Curic align tool can only move things according to their centerpoint or origin point. So with the objects being of different sizes, moving things around based on those points won't do me much good. I need something that will take into account where the previous object ends, and adjust the next one's starting point accordingly. The closest one I've come up with so far is the 2DXY Slick Moves which does arranging items up equidistantly like I want. However I can't seem to influence the distances involved. https://www.youtube.com/watch?v=l39jgyJvDUI

Advertisement