I see the same long list of material collections. I have nearly twice as many subfolders as can be displayed on screen at one time. This has been relayed to the developers and hopefully they will revert back to the folder-subfolder thing.

OK, had an issue with what seemed to be lost textures but, was a return to back face issues. Something I have not seen for a while now. Probably a Rayscaper issue but not the end of the world, I usually check these things as a rule. This one bloody unit was an import and I missed the use of back face in one cabinet door. Anyway, the downstairs is cramped but not really that tight when seating is deflated/stored and the folding dining table/chairs can be brought out for a meal with friends. A drop down cinema type screen for film night with snacks easily catered for. Hot water is as designed via a Quooker type system to save space and improve economy. Heating via passive home and possibly a ground pump but passive should not need that really. Shower is electric and solar panels on the roof to power it. A pull out drawer under the stairs for batteries. No boiler, gas or electric will save space and energy uptake. I am considering uploading the bare bones as a challenge but, more on that later. [image: 1763952561515-7-1024s-4000-x-2396-6404134tri-gpu-3m-22s-denoise-on-resized.png]

@Rich-O-Brien @Mattshiggins I'm having the same issue here. I've tried uninstalling all other extensions and plugins and running Sketchup without any other apps in the background and I still get the same thing. Is there a way to check what is getting focused when I press tab, maybe? To try and find what's stealing the focus? EDIT: or maybe change that tab key to something else that doesn't cause the issue? EDIT 2: updates here: https://community.sketchucation.com/post/1617927

Danke für die Begutachtung der Datei. Es stimmt, es ist eine v23-Datei, die ich mit v24 öffnen wollte. Da der Plan doch viel Arbeit war, würde ich mich freuen, wenn zumindest der Großteil noch verwendbar wäre. Die Hoffnung stirbt zuletzt. Thanks for reviewing the file. It's a v23 file, which I wanted to open with v24. Since the plan was a lot of work, I would be happy if at least the majority still usable. Hope dies last.

Did you change the number of segments in the corners from the model you shared? I used the geometry in your model and didn't make any changes other than fixing the location of the axes and moving the model to the origin. Out of curiosity what are you expecting for the outside diameter of the round part? What are the expected dimensions for the rectangular part? You say you want the walls to be 1.2 mm thick. If you are selecting 1.2 mm for the offset in your model, the walls will have practically no thickness.

That looks pretty slick.

@Rich-O-Brien You are a Star! Thank you.

Anyway, Curic 2 Level + Curic Copies (or S4U PickUp) does the same thing as this one. I use S4U PickUp cause is better than Curic Copies. And Curic Select++ does the same thing as Curic To Level, but still i find Curic To Level better.

There is another one from Eneroth, and i think maybe two more (one may be Tax Engineering, plus another one)

@Rich-O-Brien thank you. The bolts tighten up enough for what these need to do but I probably should have extended the that side so I could complete the hex recess. I expect then I could tighten the knob enough to break the clamp.

This is really great, and thank you for sharing. You did the right job and well deserve what you got! I wish for way better upcoming days man!

Hello, Material Browser v1.1.1 is out Here what's new: You can precisely choose which sources to display: [image: 1763247282734-sketchup-2026-material-browser-plugin-v1.1.1-settings.webp] Interface is more reactive and more predictable (status bar). Source logos and material names are proportional to thumbnails. Plugin window can be resized to a smaller width and height. Poly Haven catalog has been extended to 713 textures. Texture downloading is more robust (3 attempts before giving up). On SketchUp open, toolbar position and visibility are restored. It shouldn't emit warnings when SketchUcation Tools is installed. Thanks to @judedouch and @ateliernab for their suggestions. Download latest Material Browser plugin from SketchUcation PluginStore.

Hardware wears out and software updates change things. When using old software that isn't being updated you need to look at the things that are changing.

I wish I could teach how to paint watercolors (online or in person)

@pixelcruncher said in Victorian Bookcase: I didn't get the 1st dibs joke Check out the prices... https://www.1stdibs.com/furniture/dining-entertaining/tableware/comprehensive-wmf-stockholm-silver-plated-flatware-kurt-mayer-germany-1960s/id-f_6959303/ ...I think that's the punchline

@dpd Extrude tools. curviloft-problem.skp

@icorrea I don't think it has anything to do with the number of curves in your model. It's a fairly simple one. I agree with Rich. If you are having problems it's most likely the graphics card or its drivers. What version of SketchUp are you using? Share a screen shot of what you see. This is what I'm seeing. A few exposed back faces (blue) but no problem working in the model. [image: 1763125116883-glitching.gif]

Practically impossible to tell with so little information. What operating system are you using? How large is the bevel you are trying to make? Share the .skp file so we can see what you are working with. Have you tried it with the current version of SketchUp. Presumably you have a current SketchUp subscription so you can update to the current version of SketchUp at no charge.

@gullfo Hoi, nog een starter. House geinstalleerd en werkend. Enkel de optie genereer materiaaloverzicht niet. Die geeft aan: app kan niet worden geopnd, -50. Iemand een idee? [image: 1763099553018-schermafbeelding-2025-11-14-om-06.52.04.png]

I appreciate your reply, if I knew there was a compatibility issue I would have never have downloaded it. What led me astray was when I checked this plug-in under the More tab it stated that .....Compatibility: v2017, v2018, v2019, v2020, v2021/22, v2023, v2024, v2025, v2026. Thanks for your help John