1. Home
  2. Categories
  3. SketchUp Discussions
Urasik Extensions | Lots of new extensions to check out Learn More

Subcategories

  • The ideal place for beginners to get help using SketchUp
    9k Topics
    60k Posts
    M
    thank You I can't believe I am benifiting something from 2013

  • No decsciption available
    209 Topics
    2k Posts
    L
    BlenderGIS can get you pretty good images.. you do need an API key to get set up but it's all free and you can even generate 3d geometry based on the elevations in the satellite images.. it tiles in blender so you the more you zoom the better the image quality to a point.

  • No decsciption available
    821 Topics
    4k Posts
    T
    Hey Mike, I'm sure you figured this out already, but when you first create the attribute type a number with the inch mark like 0" or 0' in the value box and hit enter. This will set the unit for that attribute to inches. This only works for the first time a value is entered. After that first initial value, you will need to use the attribute info dialog to make changes. In addition, you can use 0 to set it to text (not "Default: Text") and 0cm to set it to centimeters. If anyone knows a shortcut for setting the unit to Decimal Number, I would love to hear it!
Log in to post
Load new posts
  • M

    Method to scale by volume

    sketchup
    7
    0 Votes
    7 Posts
    588 Views
    M
    A common thought or relationships between scale factors for length,area,volume is conceptually difficult to understand.Its also important and has some interesting practical applications.Weighing scale unit introduces these ratios from a range of perspectives,its end up looking at some practical applications.
  • G

    Paint DWG to a face?

    sketchup
    7
    0 Votes
    7 Posts
    634 Views
    G
    Thanks for all the replies. Yes, all are workable, I was just hoping that there was a way/plugin to drape the DWG.
  • S

    Problems with push/pull

    sketchup
    3
    0 Votes
    3 Posts
    3k Views
    fredo6F
    @sirjohan said: [image: udm7.jpg] I have a problem eith my push/pull tool/knowledge. When i pull in this shape, the inside becomes empty. The floor in this case does not get solid. When i do it woth every other shape the "inside" of the shape is filled "solid" What do i do wrong? This is because of the small sides. Just press Ctrl when you push pull and you'll force the thickening mode. Fredo
  • V

    Spherical export

    sketchup
    2
    0 Votes
    2 Posts
    455 Views
    cottyC
    There are two plugins which export 6 cube faces: CubicPanoOut PanoScene which you can transform to a spherical image (equirectangular) afterwards (e.g. with hugin) ...
  • S

    Plugins folder permissions and PC secruity

    sketchup
    3
    0 Votes
    3 Posts
    424 Views
    S
    Thank you TIG - this is just the kind of info I was after. I'll print this out and sit back down with the IT guys on Monday and see what we can come up with. @tig said: Your IT guys are on a sticky wicket if they want to control ALL plugins use, because you can download a plugin to any folder you have full rights to We don't have permissions to anything other than our user folders (my docs ect) and we only download .rb and .rbs files from sketucation / smustard that have reviews and credible history but yes I get what you are saying. As I said I fully understand the need for PC security, just want an easy workaround (which you have provided) that enables me make full use of the flexibility and power that plugins provide in SU. Hopefully this will be ok with our IT guys. Thanks again for the speedy response - as always much appreciated....
  • S

    Placining Components

    sketchup
    4
    0 Votes
    4 Posts
    210 Views
    S
    Thanks for your help. My problem is solved. I used a template that was geolocated to create some components. Now to un geolocate the components.
  • S

    Naming of Nested Components

    sketchup
    3
    0 Votes
    3 Posts
    291 Views
    S
    Thanks for your help Mitcorb. I will use your methodology.
  • A

    Problem with version 8 and 2013 switching file icon RESOLVED

    sketchup
    3
    0 Votes
    3 Posts
    191 Views
    A
    Well that was surprisingly painless. just deleted V8 same problem. So deleted v2013 and re installed and all is 100 % well and good. All my plugins and other folders of concern were retained and bugspalts have vanished and icons showing up as 2013 Yyaaaaaay so happy !!
  • N

    Strange crash related to hardware acceleration in SketchUp

    sketchup
    6
    0 Votes
    6 Posts
    1k Views
    N
    I no longer experience the crash which leads me to believe it was an NVIDIA driver issue; I am using the latest beta drivers (331.40).
  • C

    Lock selection??

    sketchup
    6
    0 Votes
    6 Posts
    2k Views
    JQLJ
    I think there is a plugin here about selection memory. You can't lock your selection but, at least you can bring it back.
  • SektaS

    Reference and Slave Models

    sketchup
    5
    0 Votes
    5 Posts
    455 Views
    SektaS
    Yep, XRef Manager works a treat. Thanks
  • cwmunroC

    Sharing Scrapbooks between PC's

    sketchup
    4
    0 Votes
    4 Posts
    362 Views
    TIGT
    A user's AppData 'Roaming' profile will be synced across a network. http://www.blogtechnika.com/what-is-application-data-folder-in-windows-7/ So if you have two PCs on the same network the same users will 'shared' stuff in his 'Roaming' AppData folders... However, most of the time your AppData stuff stays on one original PC [e.g. AppData Local folders] and therefore it needs manually copying between different PCs - either across a network or by other 'cloud' or 'hardware' methods...
  • C

    Import multiple dwg files into SU in one shot?

    sketchup
    5
    0 Votes
    5 Posts
    1k Views
    TIGT
    Look in the SCF PluginStore for my batch importer, which will import all files of a given 'type' found in a folder...
  • kuponoK

    Curviloft: temporary dialog

    sketchup
    5
    0 Votes
    5 Posts
    395 Views
    fredo6F
    Could you post or PM me the full error message (from the top) Also, I see a mention of jbb_layer_panels in the error message. So there may be a conflict there too. Fredo
  • halroachH

    Precise Scaling?

    sketchup
    9
    0 Votes
    9 Posts
    1k Views
    M
    This reminds me of the way things had to be done in SU6 to get colour textures on terrain. The technique was set out in detail in a go2school video. Not sure if its available from them still - it was a great help to me at the time. The technique was to explode the mesh of the B&W, get colour imagery from Google Earth as PNG, Project as Texture, measure on mesh then use the tapemeasure to scale. Final adjustments were possible using the pin tools. Hope this helps!
  • T

    Defining Datum Planes in SU

    sketchup
    3
    0 Votes
    3 Posts
    529 Views
    T
    The models were aligned to the origin in standard orientation. It was one of the things I personally checked to make sure this wasn't a factor. I'm not 100% sure, but it seems to me that all features like edges, groups, components, and planes, are ignored in the conversion from SU format to STL format and none of this information is saved with the model. When you use the export STL plugin from the Extension Warehouse you need to select all parts of the model you want to convert (I just go CTRL-A), choose the format (binary or ASCII) and the units and away it goes. If you haven't exploded groups/components and turned off edges it will tell you it has ignored these things in the process of creating the STL file. This is what leads me to assume that things like datum planes are also being ignored in the process. I need to workout how to reorient the model in Pro E by inserting new datum planes... which I don't know how to do yet. Maybe if I could export the SU file as some other format that preserves these features that would solve my problem???
  • depth3dD

    DWG import hangs SU Pro 2013

    sketchup
    7
    0 Votes
    7 Posts
    465 Views
    depth3dD
    @tig said: I first saved_as a R12 DXF [25Mb!] - which retained geometry etc, imported it using mm as the units, *NOT retaining the CAD origin... and it came into the SKP pretty quickly. *Some of the DWG's geometry is pretty far from 0,0,0 Here's my v2013 SKP version, looks like everything is there ? I zipped it because it's 5Mb. TIG You're a star. Thank you again for your time and skill. Talk about a convoluted path to getting the thing to behave itself. I am pressing on now with the model at full speed. Have a great day. Patrick depth3d
  • L

    SU 8 pro / OSX 10.6

    sketchup
    8
    0 Votes
    8 Posts
    498 Views
    sketch3d.deS
    @lorenzos said: ... because I can not buy the license anymore. yes, we can (sell) you a SUP v8 lic., just drop an email with the platform and your full address to our sales. hth, Norbert
  • oceanembersO

    Mapping imports to toolbar?

    sketchup
    4
    0 Votes
    4 Posts
    299 Views
    Dave RD
    Yes. This is basic stuff in SketchUp. Put your components into a folder or folders and choose them as "local collections". Add those collections to favorites so you can quickly get to those libraries in the future. Place the component axes and origin to make inserting the components easy.
  • kenK

    Running Pro and Make on a laptop with XP

    sketchup
    7
    0 Votes
    7 Posts
    404 Views
    kenK
    Well that me leads to another conclusion. VisTools locks the hidden geometry. So going to give it a try. Very frustrating to use the laptop. Program has a long way to go before if can complete with other programs on stability. Thanks for your insights. Ken

Advertisement