FredoBend | Powerful new bending tool for SketchUp Download
  • Modelling a tramway

    Gallery
    506
    1 Votos
    506 Mensajes
    218k Visitas
    Rich O BrienR
    Can't wait to see this printed!
  • Been a while.

    WIP
    27
    1
    3 Votos
    27 Mensajes
    480 Visitas
    Mike AmosM
    You are getting there, no worries. Hoping you have a decent break mate.
  • How to publish a new extension

    Developers' Forum
    3
    1 Votos
    3 Mensajes
    50 Visitas
    L
    @Rich-O-Brien Hi Rich-O-Brien No worries at all! I completely understand Thank you for getting back to me. I’m looking forward to your email this week Best regards
  • Update Notices

    Extensions & Applications Discussions
    2
    0 Votos
    2 Mensajes
    37 Visitas
    Rich O BrienR
    Launch Sketchucation Tools Open SketchUp Go to Extensions > Sketchucation > ExtensionStore If there's a bell icon you have updates pending. If you have the toolbar active we also add a Red Dot to the ExtensionStore icon as a prompt too.
  • Videos of 2026

    Corner Bar
    42
    1 Votos
    42 Mensajes
    1k Visitas
    pilouP
    https://www.youtube.com/watch?v=YJi5LiN5P8A
  • Pour changer un peu...

    Français
    1k
    0 Votos
    1k Mensajes
    388k Visitas
    pilouP
    Et donc! [image: 1775477775443-rosace.jpg]
  • Free of 2026

    Freeware
    70
    0 Votos
    70 Mensajes
    3k Visitas
    pilouP
    [image: 1775477775443-rosace.jpg]
  • SCFLicense: Extension Licensing on Sketchucation

    Plugins
    2k
    0 Votos
    2k Mensajes
    1m Visitas
    Rich O BrienR
    @publied RoundCorner and Fredo Corner are separate extensions.
  • Medeek Wall Plugin

    Plugins
    2k
    0 Votos
    2k Mensajes
    1m Visitas
    medeekM
    Version 4.4.5 - 04.05.2026 Fixed a bug with the profile cutting of balusters. Enabled a new boolean subtraction algorithm for profile cutting of balusters.
  • Lisser une courbe

    Français
    2
    0 Votos
    2 Mensajes
    53 Visitas
    pilouP
    Bien qu'étant normalement un spécialiste éclairé de la sauce tomate je me permets de vous donner ce petit tuyau! J'ai posé la question à Gemini (gratuit) Il suffit de cliquer sur l'icône qui vous envoie la discussion directement dans Google Docs ou vous n'avez plus qu'a le sauvegarder en PDF si vous voulez en garder la trace! Menu Download / PDF https://gemini.google.com/app qui m'a répondu ceci! Lisser des courbes dans SketchUp.pdf Il va de soit que je n'aurais pas pu répondre de façon si ordonnée, complète et parfaite! Bonne découverte! (de la sauce tomate des Ia et de mon petit site qui a quelques rubriques SketchUp pour la postérité!
  • Free de 2026

    Français
    61
    1
    0 Votos
    61 Mensajes
    2k Visitas
    pilouP
    [image: 1775341906357-wire.jpg]
  • 0 Votos
    2 Mensajes
    52 Visitas
    J
    Problème résolu, Mariocha à fait la mise à jour. ça fonctionne.
  • Trying to draw an elliptical cone

    SketchUp Discussions
    28
    0 Votos
    28 Mensajes
    892 Visitas
    J
    @frascati I came here to find out how to form an elliptical cone, but didn't see a simple way. So I had to figure it out for myself. Yea, this is an old thread. I'm posting this here in the hope that someone else searching for the solution might find it. Draw a circle. Make a triangle with one point on the centre of the circle, one point on the edge, and the third point at the height you want the cone. Select the edge of the circle. Choose "Tools —> Follow Me" and click on the triangle's face. You should now have a circular cone. Choose "Tools —> Scale". A yellow box with green handles should appear. Click on the centre green handle on the vertical box of the selection that is in the dimension you want to make smaller to create your ellipse. Touch the modifier key that causes both sides to scale about the centre. On the Mac, that's the OPTion key. Move the cursor inward until you get the size of ellipse you want, or type a scale factor into the "Measurements" box. That's how I created the following elliptical cone, with a length-width ratio of 0.5. [image: 1775272020099-screenshot-2026-04-03-at-20.06.14.png]
  • LOTT Vignette Stripe usability issues

    Plugins
    3
    0 Votos
    3 Mensajes
    82 Visitas
    panixiaP
    @fredo6 said: I will probably dicontinue the plugin. Please no, is my favourite plugin ever
  • Bu long chi tiết [Bolt Details]

    Plugins
    1
    0 Votos
    1 Mensajes
    34 Visitas
    Nadie ha respondido aún
  • Giraffe

    Corner Bar
    2
    0 Votos
    2 Mensajes
    75 Visitas
    Mike AmosM
    A rancher dies and leaves everything to his wife. She was a very good-looking woman and determined to keep the ranch, but knew very little about ranching, so she decided to place an ad in the newspaper for a ranch hand. Two cowboys applied for the job. One was gay and the other a drunk. She thought long and hard about it, and when no one else applied she decided to hire the gay guy, figuring it would be safer to have him around the house than the drunk. He proved to be a hard worker who put in long hours every day and knew a lot about ranching. For weeks, the two of them worked, and the ranch was doing very well. Then one day, the rancher's widow said to the hired hand, "You have done a really good job, and the ranch looks great. You should go into town and kick up your heels." The hired hand readily agreed and went into town one Saturday night. One o'clock came, however, and he didn't return. Two o'clock and no hired hand. Finally he returned a round two-thirty, and upon entering the room, he found the rancher's widow sitting by the fireplace with a glass of wine, waiting for him. She quietly called him over to her.. "Unbutton my blouse and take it off," she said. Trembling, he did as she directed. "Now take off my boots." He did as she asked, ever so slowly.. "Now take off my socks." He removed each gently and placed them neatly by her boots. "Now take off my skirt." He slowly unbuttoned it, constantly watching her eyes in the fire light. "Now take off my bra.." Again, with trembling hands, he did as he was told and dropped it to the floor. Then she looked at him and said, "If you ever wear my clothes into town again, you're fired."
  • 3D Truss Models

    Plugins
    2k
    0 Votos
    2k Mensajes
    1m Visitas
    medeekM
    https://youtu.be/4-6MWGZPo-U?si=nNP6T4TUf_b2pwst
  • Many projects

    Gallery
    319
    2 Votos
    319 Mensajes
    45k Visitas
    jo-keJ
    [image: 1775046995004-2026-02-16-12.48.58-resized.jpg] [image: 1775046995107-image1_000-resized.jpg] [image: 1775046995196-image1_001-resized.jpg] [image: 1775046995291-image2_000-resized.jpg] [image: 1775046995385-image2_001-resized.jpg]
  • [Plugin] FredoBend - v1.2g - 01 Apr 26

    Plugins
    50
    5
    3 Votos
    50 Mensajes
    2k Visitas
    P
    @fredo6 Just checked it out, It works now! I am soo happy to have an extension like this for my line of work. Thanks for all of your hard work and dedication!!
  • Maxwell render compatible graphic cards

    Corner Bar
    5
    0 Votos
    5 Mensajes
    109 Visitas
    Mike AmosM
    Thanks Rich.