I've also had this happen frequently. It may be due to the dividing line not being completely closed. Try drawing lines from the dividing edge to the outer edge, to hone in on where the gap is. If the above suggestion from myself or others do not work, I've also found that it's sometimes due to distance of the model from the origin or if the model is too small, messing with Sketchup's calculations. Try moving it back to the origin (changing axis location does not move the origin) or scaling the model up by 1000 (and back down after you're done working on it, if needed).

@dave r said: So the issue is that the component's axes and origin are not within or close to the geometry contained in the wrapper. There isn't any way to click on component axes and get the component open for editing. Perhaps, instead, maybe you could select the component from the Outliner. You'd at least be able to sort out which component axes belong to which component. As you already recognize, the problems you're trying to sort out are due to sloppy work on the front end. Maybe you should consider that there comes a time when you need to cut your losses and start over. You've been chasing this axis thing since last week, I think. Perhaps it would be faster, easier, and less frustrating to start over from the beginning with clean modeling. Or maybe at least you can go back and fix the original CAD file instead. Just a thought. Absolutely true Dave sir. That's what I'm doing now, thanks to thomthom axes tools. I am now building the entire model from almost scratch and manually choosing the axes tools plugin to centrally place the axis. I've been using sketchup since 2006 and never faced this problem because, my architecture site never exceeded the 11 acre mark. Now, I have made serious mistake for the first time and learnt a lot from it. P.S. You're speaking like my 60 year old dad.

Thank you guys! I ended up going the Shape Bender route. I'm going to mess around with Curvishear just to see how that works as well.

@pbacot said: Look at the possibility of using a transparent png texture as well. Would love to see what you come up with! Pbacot gives you a good suggestion you may also try transparent PNG textures also.

But rest assured that this might have nothing to do with the "Dynamics of the component" glued components (and also groups) are created automatically if you draw a closed shape on a surface, without intersecting it's borders and group it or make a component out of it. If you take a moment to look at the component parameters of the "Make Component..." table you'll see it is auto defined as "Glue to Any face"

thanks. I have the latest from Smustard, but It wasn't working , but I will just give the "rip out all the cords" try and see what that does. D

I know this is a bit of an old post, but we at Twilight Render wanted to let you know that after a lot of hard work we are bringing satellite and terrain back to SketchUp Make through Twilight Render Pro and the Terrain Tools AddOn package. We've posted more about it here https://sketchucation.com/forums/viewtopic.php?f=80%26amp;t=68220 or you can visit our website announcement here: https://www.twilightrender.com/phpBB3/viewtopic.php?f=10%26amp;t=5861 We hope this provides a useful workflow for all SketchUp users who have been missing their terrain since May!

Re: SketchUp Warehouse Postby Aerilius » Sat Jul 09, 2011 9:04 am Hi, have a look at this: http://www.google.com/support/forum/p/sketchup/thread?tid=74deeae241b00f82%26amp;hl=en In general, the purpose of 3d warehouse is sharing and the ToS imply that what you want to do is allowed. For a detailed and correct interpretation of the Terms of Service, you would need an attorney. Best is always to ask each modeler to be sure if he is ok with redistribution (you can contact the owner by clicking on the model page on the envelope icon next to the author's name). 0 Aerilius PluginStore Author PluginStore Author

I didn't see that, thanks Marcus. Colors and textures seem fairly straight forward. There is a color hierarchy similar to SketchUp where Face (amf triangle) color over-rides Group/Component (amf Volume or object) color. In amf, vertices may also have a color although I am not sure how that might be represented in SketchUp.

Did you look at Budget machine. under $1000 What is your price range. I think in my case, speaking for myself, my income need to increase. I find the Budget machine are high for me too. -dukejazz

Thanks Fredo

@jim said: I didn't bother with the "bottom only" option, but this should work…. Hope this helps. Awesome!! Thanks!!!!! DC's are little more involved than what I can handle at this time. I am trying to get my component collection so I can spend more time designing and less time in "busy stuff". Doors, and Millwork are my next try…

It would also help if you could ask nicely. People here are helpful by nature but even so...

@jim said: The Axes can be fixed using this: http://sketchucation.com/forums/viewtopic.php?t=30508 Thanks a lot for this great advice. My headache has been cured finally . I hope this is an evergreen feeling and I wont run into this section cut zoom problem again. And thanks everyone for the advice. I also need an autocad to sketchup workflow tips and tricks so that such headaches and others can be prevented. Is there a complete guide available from autocad to sketchup?

Solved the problem: After a while I nearly gave up on fixing the problem. But now I have found the solution. It was not a driver isue as I first thought. After deleting all the drivers and plugging in a generic computer mouse, sketchup would still not zoom when scrolling. So my next step was to question windows 8.1 and I quickly came to the answer: When you install a program that makes it possible to scroll on inactive windows (in my case: katmouse) it can cause this kind of problem. Just thought it was worth sharing.

@pilou said: RayTracer by Thomthom Despite of the name, it's a strong falling objects on the ground! [image: file.php?id=53900&t=1] JESUS CHRIST!! Seriously, some of these plugins are so great I can´t control myself. Thank you

hey John, Here are sone people ratings of the best machine's Reviews are in at the 3dhubs Welcome to the 3D Printer Overview. 3dhubs.com| http://www.3dhubs.com/3d-printers "Curious about the best of best? Find our full reviews in the 2015 3D Printer Guide, or jump straight to one of the 5 categories: Enthusiast, Plug ‘n’ Play, Kit/DIY, Budget or Resin."

@woodtechie said: Hello. Can anyone point out why I can't push/pull the highlighted face here? The reason has been explained. You can also try to use push/pull while holding "ctrl" down in these cases.

Well, I've found a solution (hopefully). It's the one I was hoping to avoid. Tomorrow I will receive a new SSD from Amazon, a Samsung 850 Pro 256GB. I'm hoping that installing everything from scratch will make everything all better. I just can't understand why my backup computer and my laptop, neither of which have the 2015 update installed, have not experienced any problems. Anyhow, tomorrow the fun begins . I'll post the results here on the off-chance that anybody cares