1. Home
  2. Categories
  3. SketchUp Discussions
⚠️ Important | Libfredo 15.6b introduces important bugfixes for Fredo's Extensions Update

Subcategories

  • The ideal place for beginners to get help using SketchUp
    9k Topics
    60k Posts
    Rich O BrienR
    @dkuucharzak said in Username change: @Rich-O-Brien, I misspelled my intended username. Could you help me change it? I can if the one you need is available. Send a mail to support@sketchucation.com and we sort it out

  • No decsciption available
    209 Topics
    2k Posts
    soloS
    Hey guys I am desperate for very high resolution/quality satellite maps, I use Placemaker and I also use Nearmap but the resolution is not that great, I have tried using AI to upscale but that too does not really solve my issues. Is there another solution?

  • No decsciption available
    821 Topics
    4k Posts
    T
    Hey Mike, I'm sure you figured this out already, but when you first create the attribute type a number with the inch mark like 0" or 0' in the value box and hit enter. This will set the unit for that attribute to inches. This only works for the first time a value is entered. After that first initial value, you will need to use the attribute info dialog to make changes. In addition, you can use 0 to set it to text (not "Default: Text") and 0cm to set it to centimeters. If anyone knows a shortcut for setting the unit to Decimal Number, I would love to hear it!
Log in to post
Load new posts
  • M

    48 3d trees rendering green

    sketchup
    8
    0 Votes
    8 Posts
    573 Views
    pbacotP
    @tuna1957 said: Walt, No worries. I can relate to the over the head comment. It's where I spend most of my time. It doesn't help that I didn't explain the problem and how to correct it very well. Going to try to clarify it a little better, I hope ! You need to edit the texture that is not rendering properly outside of SU in Photo Shop or Gimp. You change the color mode from "indexed" to "RGB" in the photo editor and then load back into the SU model and then it should render the correct color/texture. I did not know that. I have heard about color being the proper mode, but not the specific problem.
  • M

    Mac help with Paint Bucket

    sketchup
    5
    0 Votes
    5 Posts
    353 Views
    tuna1957T
    Walt, glad I could help. chuck.
  • utilerU

    Issue Inferencing along the Green Axis...

    sketchup
    21
    0 Votes
    21 Posts
    3k Views
    Wo3DanW
    @utiler said: And just tried a new model with nothing in it.... Can't find the red axis. Just tested a model similar to the one in your file, feb 13. With the camera position you presented I could find R, G and B axes in FOV less than 10 deg upto 120 degrees. No problem here. The blind spot that seems to only appear on my laptop decreases with a larger FOV. Weird.
  • john2J

    Missing lines in pdf

    sketchup
    9
    0 Votes
    9 Posts
    520 Views
    john2J
    @dave r said: I don't know of any links. It's just experience. Reminds me of an Indian proverb."Talking to a wise man is far better than reading thousand books."
  • H

    Import texture on curved surface

    sketchup
    3
    0 Votes
    3 Posts
    237 Views
    N
    Sketchup just put a tutorial on this on you tube. https://youtu.be/JTj4t3R3qwg
  • Bryan KB

    Twilight Render will not install

    sketchup
    2
    0 Votes
    2 Posts
    443 Views
    Bryan KB
    I figured it out. I had downloaded the 32bit version and I needed the 64 bit version. Twilight had 2 different download pages. Problem resolved.
  • N

    Round Corners Plugin

    sketchup
    6
    0 Votes
    6 Posts
    749 Views
    TIGT
    Don't forget that for most of Fredo's Extensions you need to have also installed his LibFredo...
  • P

    Can you save to SketchUP 7 as default

    sketchup
    7
    0 Votes
    7 Posts
    1k Views
    P
    Thanks a ton Charlie ! This is working fine for me. Best regards PRSS
  • N

    Quantity Reports

    sketchup
    3
    0 Votes
    3 Posts
    546 Views
    sdmitchS
    @nauzer67 said: I am trying to use Sketchup to give me a report on componets that I am using to model a insulated styrofoam foundation.I have 3 componets: a corner, a standard block, and an adjustable length block which is used to fill in between the standard blocks and the corner. Some of these blocks are copied and moved and some are grabbed from my componet library. When I run a report some blocks are grouped while others are each on a seperate line. Is there any way to control what gets grouped and what is on its own line? I need my adjustable componets to each be on a seperate line so I can add the total length of all these componets and divide it by the length of a standard block to get my actual quantity. Help please.. Perhaps this will help. Rather than putting each cut block on a separate line, I did the addition for you. If this is acceptable I will send you a copy of the plugin by Private Message. [image: kTwB_foundationblockreport.gif]
  • john2J

    Vectorized shadows

    sketchup
    8
    0 Votes
    8 Posts
    783 Views
    john2J
    @pilou said: Tig has shadows Projector ! Yes, I have it. It's a lovely plugin. I recommend TIG to my friends as the Nike, Adidas, Puma, of plugins. He is a brand. Always use his plugins whenever you find yourself choosing between more than one plugin suitable for the same purpose.
  • L

    Whats extention is a best for copy along path ?

    sketchup
    12
    0 Votes
    12 Posts
    2k Views
    P
    I thank you very much for your exhaustive explication. It does make sense. I will give a try, hope with great success. Best wishes with my deep appreciation.
  • utilerU

    Wishlist for SketchUp 2018

    sketchup
    47
    0 Votes
    47 Posts
    9k Views
    pbacotP
    Speed and large file capabilities. They always say we'll just ask for more but SketchUp is always behind on what one needs for working on typical models for typical small building projects, let alone for adding landscape, and other models that are handled easily by other software.
  • J

    Problem when trying to export model to .x file

    sketchup
    6
    0 Votes
    6 Posts
    840 Views
    J
    After many hours of alchemy there was no result. I really dont know what's wrong both for this model and for 2 other models which are detailed...I tried xexporter which was fast and I was happy but...the results were a complete mess..I think I've used everything...what else is there??
  • A

    Paste and paste in place issue

    sketchup
    3
    0 Votes
    3 Posts
    377 Views
    A
    Thanks for your response. I figured out the issue I was having. I downloaded a new plugin which I assume was conflicting with other plugins. I deleted this and it fixed the issue. I can copy and paste again!
  • S

    Transparent image on a curved surface

    sketchup
    2
    0 Votes
    2 Posts
    419 Views
    TIGT
    If you view in Monochrome mode are you sure the material is applied onto a 'front'. If your Style has a distinctively back-face color versus front-face then you'll see it clearly. Most renderers do not render back-faces, even when they have a material... PS: Posting a simple example SKP would also help us help you...
  • hellnbakH

    New laptop not meeting my expectations

    sketchup
    6
    0 Votes
    6 Posts
    597 Views
    hellnbakH
    Well I finally got around to trying this fix [image: h3Vz_2017-02-03_221211.png] and it worked! Set my values at 60 and now even my largest model can be worked with no problems. Unfortunately I had already reset the laptop back to the original factory settings in anticipation of selling it, which meant that I had to do all the updates again (a real pain in the butt), and copy almost 700GB worth of data over to it (including my 369GB Sketchup Stuff folder). Now I get to do all the fine-tuning (again). Fun time. See what trouble you caused me, Rich?
  • P

    How to create a model "skin" for 3D printing

    sketchup
    9
    0 Votes
    9 Posts
    949 Views
    gillesG
    You should post post your model SU V8 so everyone can open it, also if some of the groups are not solid try Solid solver (TIG) or/and solid inspector (Thomthom). Then select all the groups you want to intersect with the major group, explode them and group, you should have a solid group; proceed outershell.
  • D

    Recommendation for .3dm to .skp file conversion?

    sketchup
    3
    0 Votes
    3 Posts
    8k Views
    D
    Thanks for the suggestions Moujiik. I downloaded Rhino 5 evaluation version this morning and it handled the conversion perfectly. ...Plus now I get to play with Rhino for the next 3 months!
  • wimveW

    Textures fading away

    sketchup
    4
    0 Votes
    4 Posts
    337 Views
    Rich O BrienR
    @dave I think the OP is flagging the blurring to the texture at the end of the corridor. I could be wrong though. To me it is a natural artifact because the pixels of the image are smaller than the pixels on the screen.
  • John SayersJ

    Resize model.

    sketchup
    5
    0 Votes
    5 Posts
    370 Views
    bazB
    @box said: Don't hold ctrl, just tap it, it is a toggle. Guide on guide off,you'll even see the little guide line symbol disappear and reappear. For some unknown reason they reversed the default in 2017. Damn, never noticed that. The toggle on seems to be the default on my puter. Never needed a reason to toggle off.

Advertisement