I can only reproduce it while Joint Push Pull is in the top bar second row down. If I take that out of the bar it does not happen. can someone try to reproduce this?

With current versions of SketchUp if should not be appearing unless you have absolutely every plugin under the sun loading at startup ans making commands. SketchUp has a top limit on the number of commands it can hold in it's head at any one time - a bit like a woman ... When it gets full it starts dumping existing commands and there menu entries gray-out... This limit was increased dramatically some years ago as more plugins came on the scene and more commands were getting used. There have been no reports of 'gray-outs' for a long time... BUT recently one or two tools have been published that deal with many 'commands' and it was suspected that they were inadvertently adding multiple copies of existing commands and thereby filling up SketchUp's limited brain... Once this was realized the tool's code were quickly reworked by their author and updates issued, there have been no 'gray-out' reports in recent weeks/months... Perhaps you have got early versions of some of these and so you need to update them urgently ? The main suspected-culprit was Aerilius 'LaunchUp' and the two other suspects were the 'Toolbar' manager tools... If you have bloated SketchUp with a surfeit of plugins then I suggest you get/use the 'SketchUcation Plugin Store' and its 'Managers' - the 'Plugins Manager' lets you easily disable plugins you rarely use, so on a restart of SketchUp they don't load... that way you can have a core set of plugins that always load and others that are usually disabled. The disabled ones can always be loaded using the manager - a permanent load adds it back into the core set, while a temporary load adds it to the available tools for that session only - on a restart it is again disabled... This way SketchUp starts up much quicker and your menus are not cluttered with rarely used tools... The 'Plugin Store' let's you keep up to date with the latest versions of your favorite plugins too...

The problem does not occur in sketchup 8! In 2013 it does!! And i have hardware acceleration On with an Nvidia gt540M, but SU does not seem to be using it, in the Details tab, it shows Intel HD graphics, I tried "Open with Graphics Processor > Nvidia " But to no avail...! Plz heLP !

@alan fraser said: For what it's worth, I was trying out a roof-builder plugin a couple of months ago. It caused a bugsplat every time I tried to apply a material that had been added to my material libraries since its install. Want to name and shame the culprit - it's the only way to get it fixed for future releases...

sorry sapper545 no way to get to open it maybe if you contact Trimble support ... salud

Hi, I am currently building some dynamic components, "pcmoor", for building construction. I too have been frustrated, however I believe the problem is in editing independent of the main model. For example before reusing a previous component to build the next, copy within a main model, then make all parts unique, use the outliner to select all the sub components at once, then make unique. thus any changes will not effect similar components. Then if you want too place into another file. One day someone needs to write a book....interested? cheers Philip

@tig said: Try running SketchUp as administrator [context-menu option on its selected icon]. This one off might then update the references/licensing etc ? Thanks TIG for the suggestion. Didn't work. I am going to follow Dave's advice and not worry about it. Thanks to all for your help. Close this please. Ken

Is there a bug report that addresses this? It's still a problem. Just try using the component for this item: Samsung 55" LED LCD 240Hz TV (UN55B8000) That " inch mark trips up the DC code. The temporary fix is to bring up that entity's info and remove the " character. That'll let the DC code continue.

Hi & thanks for your comments. I'm running SU8 on windows 7/64bit.Both the work file .skp & .skb backup sit on my local desktop. I copied them there to avoid the autosave over the server but the 0.skp swap files are still being tried to save on the server, e.g. material library. Whenever my PC is stuck in autosave back to server I cut the VPN, a 0.skp warning appears and save manually. Attached a screenshot of preferences > files. All linkes used to point to the server so I just changed models and export to the desktop - do you think that would help? [image: zAQr_preferences_files.PNG]

@ely862me said: Might be some layer problem ... There are no layers other than Layer0 (at least in the downloadable version - especially regards to deanlegg's comment here). Also no disappearing and everything works fine here...

@thomthom said: I generally find that parallel view often produce clipping glitches. Thanks It's good to know it's not a problem inherent to my machine.

Hi, Does anyone have any further insights into this issue? I have encountered a very similar problem: Tooltips do not show when the toolbar is moved to the horizontal position (Mac OSX) This seems to be particular to Mac OSX, but it is happening in both SU7 & SU8. At first I noticed it for the toolbars of a plugin I am developing, but I also tested the Dynamic Components toolbar and the same thing happens. When the toolbar is moved to a horizontal position the tooltips stop appearing. If I move the toolbar back to vertical, then restart Sketchup, tooltips start appearing again. I've trashed the preferences files and still the same thing is happening. I've quarantined all my plugins and it still happens. Any ideas? This is really quite annoying as I want to be able to use tooltips for my plugin and horizontal toolbars are much more convenient. thanks Dave

"Known about this for ages"?? . Makes you wonder what they have been doing. There must be a hundreds od little crappy simple fixes they never bother to fix. And yes I say simple. You're not talking hundreds of hours SW time for some of thes things. Steve Jobs was correct. Google is (was) a lazy company.

The 3D Warehouse is still maintained by Google (I think). But in the past, those data did not use to be up to date either - just a rough estimate of the downloads and views.

reminds me of: I'd rather have a bottle in front-a-me, then to hafta have a frontal lobotomy. Two different words, that mean the very same!

I see. Thank you for opinions and suggestions. Actually, I have several Windows tweaker applications here. Three of them left. Those have that registry checking ability. CCleaner, Advanced System Care and TweakMe, which is do nothing but to use standard windows utility that usually hidden from common user. I always make backups too. Thanks again

Wow that's odd. It doesn't work like that on mine, so it isn't a typical behavior. I would guess this might be a windows malfunction? Or maybe a problem with the multiple monitors? I'll dig around and see if I can find anything on it.

Have you Aero enabled?

I decided to try uploading my models through the "Share Model" option inside SketchUp and that seems to have worked. I still don't know what the problem was with the .kmz files and the Cedge error messages - but at least my models can be downloaded into SketchUp without errors now... here is the re-uploaded SpaceX Dragon... http://sketchup.google.com/3dwarehouse/details?mid=b8620dbc2412f040e8467026884ac180&ct=mdsa

Actually this check did find errors! I had run the test earlier just after opening the file and it didn't find anything but if I reproduce the error and then run the test then this is found: [image: 8p60_FixProblems.png] If I now try and reproduce the error it is gone so this fix did the trick. Wonder why it happened and what it means?? Thanks!