the autosave file is always in the same file as the model. To find out where your autosave default is open a new SU document and just hit save, then look which directory it is saving too, your file is prob there.

Then the only thing you can do is to slice the image up into smaller pieces and apply them individually to separate faces and adjust them like a puzzle in SU.

Finished Thanks guys realy helped I am geo modeling this so it is going to be basic! Roofs are not my forte... As a reward for helping me out you can see how far I have gotten [image: YeJf_Rooffinished.JPG]

Perfect! Thanks guys.

Hi Jim - Thanks for the response. I should have dug around a bit more before posting this question. Laziness, I'm afraid. Up until now, I haven't needed to specify more than one position for copies generated using the COPIES function. I should have known, from the DC stairs I've seen, that you can specify PosX,PosY, and PosZ attributes for copies at the same time (and any other attribute, for that matter).

http://sketchup.google.com/3dwarehouse/cldetails?mid=7cc69325851e1d7f728d6c1d60a639f2&prevstart=0 This should help you. These are all standard sizes for cabinets in inches, not metric.

Several suggestions: Get the house model fixed before you do anything else. You should not have to draw the triangles to get the surfaces to form the way you have. Set the drawing axis to line up with the house edges to help you here; The roof surface measures 25367141.8 sq mm and the panels 1580x808 ( 1276.6 sq mm). That means if you have 100% packing efficiency you should be able to install 19 but the chimney prevents that so look at either optimization of the required number of panels based on you longitude where you are going to install and possibly reduce number required; Instead of installing all " vertically" the way you have try 90 deg rotation of some to see if you can get the 12 to fit ok Look at the combination of different panel sizes to get the wattage you need to fit your needs. If you check the panel supplier site I guess they would give you some options in this area. Good Luck BTW here is a small fix to your model http://sketchup.google.com/3dwarehouse/details?mid=c0eb29754d7d46969f30f02514717f00

If you paint a component with a material, all the faces inside that component which has Default material will inherit the components material. A very handy feature. It means you can model a car, leave the body with Default material, and add all the rest - like tires, lights etc. Then when you place instances of that car component you can paint each instance with a different colour and the car body will reflect that. I'm guessing this is what you are referring to. Maybe a sample model, just to be sure we are talking about the same thing?

That new CS5 "Content Aware" tool is just amazing. http://www.youtube.com/watch?v=NH0aEp1oDOI This video is the most compelling use of Content Aware http://www.youtube.com/watch?v=3ScWu7pG7r0

If you want to visually pick the materials you replace from the model, you can use this one: http://forums.sketchucation.com/viewtopic.php?f=323&t=26013

that would work but it would lose a bit of the aesthetic appeal i was looking for so i think im gonna need to rethink the whole idea. thanks alot for clearing it up, thats one headache over.

@gaieus said: Hi Dan, Check the warning box under Preferences > General > Scenes and styles. You will get those annoying popups that ask if you want to change, save as new or do nothing... Thanks Gai

OK - cheers TIG That works, but it seems to me it would be much cleaner if the incoming file would either just drop at the origin automatically, or you could type in 0,0,0 or even just 0 - don't see what the advantage is really of having it default to following the cursor around... rabbit

@gnue said: yes, you can. you need to change the decimal separating and number grouping indicators from OS's control table. for MAC - System Preferences>Language&Region, hit Advanced button, change Number Separators. But be careful this will be changed for whole system and in every other program you use. The use of some locale's alternative decimal-point as a ',' [versus '.'] and the 'separator' as ';' [versus ','] now work on many locales... Unfortunately SketchUp has been somewhat tardy in fixing some issues... For example, when typing absolute/relative coordinates into the VCB [requiring a ] or > etc] - then this can cause SketchUp to skip the input [aka 'fail']. This is a known issue... although there are PC based [temporary] fixes using PC's AutoHotKeys... obviously it should be fixable at the Trimble end !

@honoluludesktop said: I would consider resetting my system to a point when everything was functioning OK. That did work.... Big Thanks Went back 2 days to be sure.

@dragoonprogramming said: No i am not that bad I am just not a mac user I have tried a few of fredo's plugins but nothing is working... Stupid macs Well if you have managed to put files in right place, i would check under tool palettes and see if listed. If not go to preferences and make sure checked. Then check what location you chose for tool to be at. [image: c2jc_SketchUpMac.jpg]

type .1

Thanks, Jeff, that's just what I needed. You can tell I'm very new to Sketchup. I used your idea to push pull from left to right instead of bottom to top. I'm interested in viewing the tutorial you "forwarded" me involving a solution using "follow me", but the tutorial wouldn't show up on my computer (even after a Flash Player update).

@ericschimel said: Hey fellow Sketchuppers... I just created a few undermount black pedestal sinks from photos in Sketchup to use as Dynamic Components in my kitchen designs. I even did up a blog post on it. Thought you'd be interested in seeing it here. http://sketchuptraining.blogspot.com/2010/08/sinks-of-steel.html If you want to go straight to the sink components, check them here on the 3D warehouse: http://sketchup.google.com/3dwarehouse/cldetails?mid=b31bc56becdd90e784283d54542a3ba0 There are some some nice DC options in these sinks as well. Hi ericschime, I just find out that one of your shared link is not working. And it would be nice if you can provide any alternate link. Thanks