jim, i welcome your intention of creating both a written manual and videos. i find it the right combination to show what an application can do. for what it is worth, the written guide that is available for podium is quite good. i have learned all the basics from it. besides, it goes a little beyond that. @unknownuser said: However, for rendering, you really need the facility to stop the tutorial during the render process and resume afterwards. If I knew how to do this, I would create video tuts for V2, so if anyone has any information in this regard, I would be grateful if you could pass it on. i suggest you post a request for this kind of info as a new topic. i am sure lots of people will give you good tips about video tutorial apps.

@unknownuser said: My comment back to clients like that is this: Quality, Speed, Price.....Pick 2! Scott I love this! I'm going to use it a lot I think

Hi EduardoNL, I suggest you take a look at this thread at the KT Forum, where I've provided a small test scene and a step by step guide, showing you how to use it right... Hope this can help you further...

Now it worked! I downloaded three different versions of indigo and none of them were the correct one! Now, with the fourth try it works nicely! Yeah...i'm stupid!>< Thank you so much for the help!

Dear Jean, Okay, I took an Inventor model and saved it as .sat; then imported it into AutoCAD; then scaled it x100; then exported it as a .dwg; then imported it into SU; then scaled it x0.01. The model is a quick one, and done to test the process (lots of small features, curves and holes close together). Here are the results: Seems to work. Now, about going the other way...... Kind regards, Bob [image: CjUU_Box1.jpg] [image: L1gO_Box2.jpg] [image: 6OD4_Box3.jpg]

If you don't mind, Pete, I included it in my "Hungarian version of 3D BaseCamp Blog"

No, that's right.

thx

@autokidd said: So heres a funny one, now that i rotated the texture in sketchup and sent it to kerkythea, I had to make some changes so i went back to sketchup, resent it to kerkythea with the shingles rotated to account for the wierd texture orientation and now it has turned the texture 90 degrees again in kerkythea, any ideas now? The short answer is No... It's not that I want to sound rude or anything, but I have no clue why this would happen... KT doesn't do anything to the UV-mapping applied... KT "reads" the 3D model and the settings applied... Like I said - it's an UV-mapping issue, but although SU isn't famous for the way it handles UV-mapping, I've never experienced anything like what you're reporting, so my best guess is that there's a rational explanation to this... Again - the best suggestion I can come up with is for you to post a 'skippy' where this problem is present and then I (and others) can try to debug it... Only alternative is that you can try to rotate your texture in KT, but I don't know how you've made the material...?!? [image: SKHR_KT-UV-coordinates.jpg]

Hello the trick of all that is this Put the joint orange(servo)to the piece orange then Group the Joint orange(servo) to the piece orange Only now use the "Joint Connector" from Servo orange to the "Parent" white!!! "Parent" white is previously made like this Put the joint violet(Hinge)to the piece violet(horizontal cylinder) then Group the Joint violet(Hinge) to the piece violet(horizontal cylinder) Only now use the "Joint Connector" violet Hinge to the "Parent" white (vertical pieces grouped)!!! (Input Name in Controller for initialize it) Rule is "put the joint to something"(not with the "connector"), "group the joint with the something", then "joint connector" the joint to a parent Have fun Sketchy Physics [image: 6DPD_concepta.jpg] roboticArmTest2.skp [image: nIrm_11s.jpg]

Hi Kim, Thanks for your reply. My SU2KT plug-in and folder were in the right folder and I had the last version. This morning I removed completly Kerkythea and all the plug-ins of the system and re-installed them for the third time. Now, all seem to be OK. I really don't understand what was the problem yesterday. Maybe I was in a kind of "twilight Zone". Thank you

Thank you! I will try it when I come home, thank you all!

Its hard to sya without having the model, but im guessing the wing details arent showing because te geometry isnt pronounced enough. If you make the gaps between the geometry a bit bigger that should accentuate it a bit, although youve got to be careful not to over do it.

I have a shapefile with building footprint features, each with a building height and ground elevation. I am trying to import it cleanly into Sketch Up, but am having some difficulties. I get the whole selection part etc etc. I choose elevation from the elevation field, extrusion from the height field, etc. etc. What happens whoever is that once the import is done and I am looking at it in Sketch up, most of it has not imported. I'd say that perhaps 25% of the footprints are showing & extruded. I haven't been able to figure out why some import and most don't - I am wondering if there is something wring with the attributes. Does anyone know if there are guidelines to be followed for the field type, length etc? Any input or ideas would be appreciated. (I'd post screenshops but I don't know how to). Any suggestions? Thanks (PS am relatively new here) ~ A

Well, scaling the model seemed to help quite a bit. Here is what I have, though Im still tweaking. Any suggestions, especially about getting rid of the burnout, but keeping the radius of light? [image: W02Q_20080603153052_23m14s.jpg]

Yes, it is a centrifugal pump. The hard part to draw is the discharge "Tube/pipe". Its diameter changes from where it connects to the body and ENLARGES significantly at the outlet end where there is a flange to which piping is connected (as shown with the red outline). Thus, the posting about whether the subdivision script could be used to speed up the drawing process of the discharge "Tube/pipe".

whats that in the fine print? oh, and we're way off topic

O.K. I will try!

Sorry, it seems like I didn't explain myself properly. I have downloaded and installed Space design without any problem. But the part that calculates material is not there

@edson said: @thomthom said: When you download V-Ray material you need to relink the bitmap textures. and how does one do that? You have to examine the material in the V-Ray material editor. Whenever you see a large M inspect it and see if it's a Bitmap material. If it is, then you have to relocate the bitmap file on your computer. Once you've relinked a material you can export it. Then you don't have to reload the bitmaps every time you import the material.