@RASKL Please run the Window > Libfredo Settings > Fredo6 Plugins Information for Sketchucation Support menu command in SketchUp and copy/paste the output into your reply.

I still have completely finished the PDF reports since I've had my head so buried in the Timoshenko stuff for a couple of weeks (probably not a good use of my time but I couldn't resist).  Here is some output for a couple of cases (two span and three span beam, equal spans with a UDL).  What is interesting is the shape of the deflection graphs for the Timoshenko analysis.  I think the numbers are correct but to be honest I really don't have another 3rd party program I can fully test against. I'm using a kappa of 5/6 and a G of 1/16 the E value, so in this case G = 106,250 Also I am just using the listed value of E for my Timoshenko calculations even though it already includes a 3% bump for shear built in. EB = Euler Bernoulli, TIMO = Timoshenko http://medeek.com/resources/engplugin/TEST8/EB_TEST8_2SPAN_UDL.pdf http://medeek.com/resources/engplugin/TEST8/EB_TEST8_3SPAN_UDL.pdf http://medeek.com/resources/engplugin/TEST8/TIMO_TEST8_2SPAN_UDL.pdf http://medeek.com/resources/engplugin/TEST8/TIMO_TEST8_3SPAN_UDL.pdf As a sanity check I multiplied my calculated value of G above by 10,000 in the code and then ran the TIMO analysis, the results are almost identical to the EB analysis as expected, so that tells me that with an extreme stiffness the TIMO degrades to an EB analysis as it should in theory.  Here are the links to the TIMO analsys with a 10,000X inflated G: http://medeek.com/resources/engplugin/TEST8/TIMO_TEST8_2SPAN_UDL_GMAX.pdf http://medeek.com/resources/engplugin/TEST8/TIMO_TEST8_3SPAN_UDL_GMAX.pdf

@Leggy said in help with a thread: it seems to be in hidden sections, so would have to select every faucet on the plane and line Likely you need to weld some edges first. @Leggy said in help with a thread: what I found is a difference in tolerances, I printed 3 nuts with 0.1/15/2 offsets in petg and tpu, 0.1 was good in petg, but had to go to 0.2 for tpu Not surprising. They have different shrink rates.

@panixia thanks

Let's hope for a lasting peace, then people may travel freely. I can not figure out why our world is like this now.

Overhang is 45 so no support needed, support at ideamaker gave me a gcode for xy and it worked good To be honest the raise 3d machines can’t compete with the bambus

The spooks are gone... ? What the Freaky Friday etc. Better call Scummy and Mouldy.

@MLUY you could select all the geometry and do the same thing. You'll only soften edges in which the angle between face normals is less than or equal to the angle set in the Soften Edges panel.

@TIG thank you

I agree with t'others, really good to see these.

Thank you @Glenn-at-home

@alskaro do you mean something like this? As TIG says, apply whatever materials you want to the various faces in the SectionCut Face. [image: 1761569581070-uniflow-steam-engine-cut-away-small-resized.png]

@Mike-Amos Yep. Agreed, many of the tutorial videos are so fast.... not well organized, messy... this is the way I learned the Blender modeling: Targeted the toolbars, I see in Layout and Editing UI, read the document, learned one tool at a time. (if needed, watched Youtube), moved to the next tool. Otherwise, it takes ages and seems hard (and it is to be honest). If they also do not adopt the new trend, I think will vanish as well.

You got that far, extra cookie score +20.

@LEADERFIT3D The advice here: https://community.sketchucation.com/post/1617255 Delete this: [image: 1761414089765-fd7ea280-60f0-43bf-b3f4-2c27f5678141-image.png] Restart SketchUp

Amazing tool! Thanks, Fredo Just uploaded a new tutorial on YouTube! https://youtu.be/ph6UMOm87ls [image: 1761349934215-pic2shape-convert-textures-or-images-into-geometry-in-sketchup.jpg]

If you are referring to a license for extensions we sell. Then yes you can. Licenses have a number of seats, usually 3, so you can activate on up to 3 devices at a time. You can manage seats at https://sketchucation.com/webshop/my-licences.php

@romanencodem Hi, I have the same issue with Universal Importer 1.2.6 Any idea? Thanks.[image: 1761309166556-captura-de-pantalla-2025-10-24-142802.png]

Much appreciated thanks