@fredo6 This plugin is fantastic and very useful but not well known, which is why I would like to write an article about it for an Italian group, but I have a problem. Being disabled, when I open the Freddo Batch windows, they open at the top, above and outside the limits of the open SketchUp window, and due to my inability to use a normal mouse, I use a virtual mouse (eviacam). It's difficult for me to move the window because the top bar is used by eviacam but is not editable. It's only my problem, but this is the only plugin I have this issue with. Is it possible to have the windows open inside the SketchUp window? [image: 1767352063969-yljde2xlc5-resized.png]

Thanks so much, its very useful.

so, on the white "paper" space you would have a list (slots) for entering text "kitchen light", "kitchen outlet", "garage door", "clothes washer", "clothes dryer" etc and add some parameters like voltage, amperage, single, dual, etc? "clothes dryer", 240V, 30A, SINGLE -> voltage logic would span a 240V across both busses? "air conditioner", 240V, 50A, DUAL -> would have two 240V splitting 25A across each for the air handler and compressor? "kitchen lights", 120V, 20A, DUAL -> split two 10A circuits on single breaker (dual switches) for overhead and under counter lights to save breaker slots etc

You seemingly haven't installed it from its RBZ. If you simply copy the ../Plugins/HouseBuilder_extension.RB file over to the newer SketchUp version it misses the images to make the toolbar-buttons [and worse!]... Unfortunately the original author was in the dim past [20years ago] and made a half-baked extension loader file, and he didn't give his subfolder the same name as the RB file. The new[ish] auto-migration tool assumes this file/folder naming convention and so it misses out copying the subfolder of images [and some other vital support files that are in that folder]. To fix it you need to find the whole HouseBuilder folder [and its contents intact] in your older version's Plugins folder and copy that whole folder over into the newer SketchUp version's Plugins folder. When you startup SketchUp it should now find the subfolder and load the buttons' images and the other vital support files...

Also, (only because I'm eagerly anticipating the plumbing release) have you considered crowdsourcing the modeling on these? Create a list on design.medeek.com that can be checked off when you receive a model that matches your requirements?

NEW RELEASE: Layport v1.4a - 19 Dec 25 Requirements: LibFredo6 15.6 Layport v1.4a is a maintenance release: Extension of validity Home Page of Layport for information and Download. Main post of this Layport thread.

NEW RELEASE: FredoConnect v1.4a - 19 Dec 25 Requirements LibFredo6: v15.6a or above Sketchup version: SU2023 and above FredoConnect 1.4a is a maintenance release including: Extension of validity Home Page of FredoConnect for information and Download. Main post of this FredoConnect thread.

NEW RELEASE: FredoGuides v2.9a - 19 Dec 25 Requirements LibFredo6: v15.6a Sketchup version: SU2017 and above FredoGuides v2.9a is a release for extension of validity **Home Page of FredoGuides** for information and Download. Main post of this FredoGuides thread.

After the Beam calculator I need to put together the post/column calculator, then the footing calculator, then the shear wall calculator and then maybe the FTAO shearwall calculator.

NEW RELEASE: LayOps v1.3a - 18 Dec 25 Requirements: >= LibFredo6 15.6a LayOps 1.3a is a release including: Extension of validity Home Page of LayOps for information and Download. Main post of this thread.

NEW RELEASE: MatSim v1.7a - 17 Dec 25 Requirements LibFredo6: v15.6a or above Sketchup version: SU2017 and above MatSim 1.7a includes changes for: Extension of validity Home Page of MatSim for information and Download. Main post of this MatSim thread.

NEW RELEASE: FredoSketch v1.7a - 17 Dec 25 Requirements: LibFredo6 15.6 FredoSketch v1.7a is a maintenance release: Extension of validity Home Page of FredoSketch for information and Download. Main post of this FredoSketch thread.

Try visiting the owner's website and follow the instructions carefully. The things you need to select to get the tool to work is a little complicated, but once you understand it it's pretty straightforward...

NEW RELEASE: Pic2Shape v1.3a - 17 Dec 25 Requirements LibFredo6: v15.6a or above Sketchup version: SU2018 and above Pic2Shape 1.3a is a maintenance release including: Extension of validity Home Page of Pic2Shape for information and Download. Main post of this Pic2Shape thread.

NEW RELEASE: ElevationProfile v1.4a - 17 Dec 25 Requirements: LibFredo6 15.6a ElevationProfile v1.4a is a release including: Extension of validity Home Page of ElevationProfile for information and Download. Main post of this thread.

Hi there... I have SketchUp 2026 version, is there any other way to buy licence and install to my Windows ?

...and works so well now!! Thanks Tig!

@thomthom said in [Plugin] Selection Toys: Hello ThomThom, I would like to report a possible compatibility issue with the Selection Toys plugin when using SketchUp 2026. After updating to SketchUp 2026, Selection Toys no longer behaves as expected. In my case (and according to other user reports), the plugin causes problems related to the interface and toolbars, such as tools not appearing correctly or toolbar customization not working properly. When Selection Toys is disabled or removed, SketchUp 2026 appears to function normally again. This issue seems to be related to changes introduced in SketchUp 2026 rather than a specific workflow error, as the plugin works correctly in previous versions. I wanted to bring this to your attention in case it helps with investigation or future updates. Thank you very much for your work and for maintaining such an essential extension for the SketchUp community.

Hey there, do you know why the points I set on my SketchUp-map are different when I cut and paste them into Google Maps? There is always a difference of about 20-50 radius.

@ecati said in Help with using WrapR: I would like to ask whether WrapR supports UDIM workflows or multi-tile UV layouts. This is important for my workflow At the end of the day, in Wrapr it's perfectly supported if you know what you are doing. The problem is that Sketchup itself doesn't have native support UDIMs in its materials. So you need to create a different material in order to import back each UDIM tile. As long as you need to export the model to a different engine with native support for UDIMs, everything is fine and you don't need that workaround. Can you elaborate a bit more what specific workflow you are after, so that maybe we can better help you? Do you need UDIMs for Substance or something like that? Here's a practical example of something I did using the same exact tecnique shown in the video above: https://community.sketchucation.com/topic/160953/ferrari-f2004.