I finally solved it! It was a dodgy plugin/extension. I don't know which one, but luckily it wasn't one of the ones I use constantly. I probly had 50 old plugins from years ago that I've never used. This only became clear when the Space Mouse in the trial version of SU24 stopped working after I had loaded a few Bundles of Extensions. So I did a clean re-install of SU24 and loaded my necessary plugins one by one. I stopped when I had everything I needed and all was good. Then back to SU19, I used the Extension Manager in SU to uninstall everything except the proven ones in SU24 and bingo, all is as it should be. Note: Rich's suggestion of a 'Vanilla" install, (see above), did not work in my case, though I don't see why it wouldn't. Cheers and Happy New Year to you all.

@Rich-O-Brien Ah thank you

@L-i-am AntonS CopyAlongCurve [image: 1734950597093-66c95be0-68ad-4de7-bb9f-66f21a2cc4a2-image.png]

@Rich-O-Brien said in Does Sketchucation Tools show only SketchUp 8 plugins?: No, it does not Thank you !

@TIG Con l'ultima versione di Lord of thr Toolbar è stato risolto il problema di compatibilità con vay 7 ma adesso mi trovo un'altro problema, spesso quando apro sketchup, va in crash. Il crash avviene proprio quando va ad aprire le barre dei menu creati con Lord of the Toolbar . Ho scoperto che disabilitando Lord of the Toolbar, Sketchup si apre perfettamente. non capisco q Se è un problema di incompatibilità con altri plugin o da altro. Per aprire sketchup devo disabilitare Lord of the toolbar E riabilitarlo quando sketchup è aperto, attraverso il plugin manager Sketchauction. Sicuramente è una incompatibilità con un altro plugin. come posso sapere quale è il plugin che va in conflitto. è possibile risalire all'ultimo plugin eseguito prima del Crash analizzando i file di log. With the latest version of Lord of thr Toolbar the compatibility problem with vay 7 has been solved but now I find myself with another problem, often when I open sketchup, it crashes. The crash occurs right when it goes to open the menu bars created with Lord of the Toolbar. I discovered that by disabling Lord of the Toolbar, Sketchup opens perfectly. I don't understand if it is a problem of incompatibility with other plugins or something else. To open sketchup I have to disable Lord of the toolbar and re-enable it when sketchup is open, through the plugin manager Sketchauction. It is certainly an incompatibility with another plugin. How can I know which plugin is in conflict. Is it possible to trace the last plugin executed before the crash by analyzing the log files.

@TIG This looks like a problem already encountered by a few users about the persistence of menu structures in the API on Windows. As I was not able to reproduce it, I never understood the root cause and I never found a fix for that. Just detect the issue (hence the Ruby console message). For information, this is anyway fixed in SU2023 and above, because Sketchup changed the way it handles menus in Windows.

@L-i-am It's not just muppets and paramilitary now. Drones and delivery have been doing the rounds at a prison near everybody for years. Weed delivery? All very well to tell a 'foreign power' that you will shoot them down but another to achieve it without civilian casualties. It does make a bit of sense for general deliveries because the current biped format has a serious issue with doors that do not open themselves. Much head scratching and yelling and that's the delivery muppets (From outer space).

@Lmararch said in Fredo6 Roundover problems: Hi All! New to the forum here, and generally pretty new to SketchUp so thanks for the read! I have just installed Fredo6's Roundover extension and I am not having much luck with it at all. I am a building contractor, so right now just trying to draw out a deck we're building and simply trying to round over the edges of some deck boards. It doesn't seem to matter if I select the geometry as a group, or click into the group and try to select a face/edge I get the cursor turning into this note that says "invalid (group or component)". I basically can't get this extension to work at all so I must be missing a critical setting or something?? Also wondering if anyone has done an instruction set/tutorial for this extension? TIA! It sounds like the "invalid (group or component)" error occurs because the geometry might be locked or not properly selected. Try unlocking the group/component, or double-click to edit it before selecting the edges. Also, check that the Roundover extension is correctly installed and configured. Test it on simple, ungrouped geometry to rule out any specific issues with your deck boards. For tutorials, searching “Fredo6 Roundover tutorial” on YouTube or forums can provide helpful guides.

Thanks for telling me about Skeng but it was for creating pulldowns of Piping components that I had made.

Do you mean S4U select? https://sketchucation.com/plugin/1035-s4u_selectool_v1-1-1 Or selection toys: https://sketchucation.com/plugin/738-tt_selection_toys

@Rich-O-Brien Thanks for the suggestion, but that's my other issue. V-Ray 7 isn't launching if LOTT is installed. At least, not in SU2024.

@Rich-O-Brien A direct hit! Thanks Rich!

@flywheel try using the 3D dxf exporter instead of the 2D exporter.

@SSABLR Please update Sketchucation Tools You are using an outdated version

@Sylvano87 Great

@SilentFart If you use the Sketchucation ExtensionStore to install Fredo6's extensions, including LibFredo6, you can use it to help you keep track ofupdates when they come and update them. You have to have the ExtensionStore installed for management of the extension licenses so you might as well use it to install the extensions. In addition to helping you track and update extensions, you'll create a bundle of extensions from Sketchucation that you can install automatically if you switch computers or when you update to the next version of SketchUp. Edit to add: Fredo6 just released an update to LibFredo6. The Sketchucation ExtensionStore shows the update is available. The red bell indicates there's an updated extension. [image: 1733516570812-screenshot-12_6_2024-2_20_55-pm.png] Clicking on it reveals the extension needing to be updated. [image: 1733516656943-screenshot-12_6_2024-2_21_11-pm.png] Clicking on the red download button updates the extension.

This problem is related to the model and topology of faces and edges. So, it helps to have the faulty model to reproduce the error and hopefully investigate a fix.

@panixia Hi Marcello, with € 11 you can easily do it even with blender, even with large ones STEPper

@BABAB You need Sketchucation Tools https://sketchucation.com/plugin/696-sketchucationtools You need Libfredo https://sketchucation.com/pluginstore?pln=LibFredo6 If you run the Window > Libfredo Settings > Fredo6 Plugins Information for Sketchucation Support menu in SketchUp I can take a look.

Turn off Scene Transitions [image: 1732201970487-d484e4ad-8da2-451a-b8d6-2ab9bbdb7e60-image.png]