@shake1 said:

Not work in SU 2021, please check this.
I have been using it for a very long time, i need it!
[attachment=0:atotgh3w]<!-- ia0 -->Su 21.jpg<!-- ia0 -->[/attachment:atotgh3w]

Greetings,

I have been using this splendid plugin with SU 2020.
Till now - there is a certain interference with the new RPC Archvision AVAIl Browser Utilities.
Models from the AVAIL (RPC) browser are not permitted to be placed/dragged onto the SU Window.

Once disabling the AMS Window Setting Plugin all works fine.
Could it be possible to fix the issue.
Sadly had to remove the plugin. Hope for not long time.

Regards

@young77 said:

Hi...
I just want to make sure is this plugin doesnt work for sketchup 2021 ?
is there any possible way to make this enable to run in skp 2021 ?

thanks,
Hp

Splendid plugin,

any updates for SSU 2021. Even paid?

Thank you in advance if any

Greetings,

Su 2020 - latest version, Windows 10.

Same issue here. Drop and drag import function does not work at all.
Any suggestion?

Thank you in advance

@tig said:

Did you try it ?
Did it help ?

Hullo again,

I am not certain but just now I have discovered that Fredo6 Scale Launcher (icon clicked) does nothing. The tools/functions are accessible via the menu.
All other Fredo6 Lunchers work fine. Once clicking the toolbars open.

I think it is related to the changes I have made in registry following the recommendations here.

PS 1
Alas it seems that this is not the culprit.
I have removed the registry entries ninth no impact - still no Fredo6 Scale Luncher.

PS 2
I have just checked another computer with SU 20.0.373 version.
Fredo6 Scale Launcher works fine there.
Would it be Su update to the latest 20.1 version the source of the dysfunctionality?

@tig said:

Did you try it ?
Did it help ?

Splendid.
I have made suggested changes in windows registry. Here is the result.

I do thank you once more.

@tig said:

There have been reports of SVG icons not working in v2020 if you do not have an earlier version of SketchUp installed.
This is because they will have lodged SketchUp in the Registry with IE, but v2020 does not - by mistake I think !

See this...
https://sketchucation.com/forums/viewtopic.php?p=659799#p659799
where @fedser has a work around... until it's fixed in an update...

This might be related to your issue...

Thank you very much TIG for your famous helpfulness.

Thank you.

Indeed the icons should look like at the picture above.
Sketchup 2020.1 has been installed with <run as admin< option.

Fredo plugins and Library are the latest versions.

That is why I am curious about the reason/culprit.

Greetings,

What has been wrong with the plugin - the only one fro Fredo6 - Ghost, there are no icon in a box setting?

I have been using a Sketchucation Tools - could it be some relation to the issue?
Many thanks in advance.

Greetings,

Is there any plugin to make possible to lock the snap to a given plane?
I have a difficulty to keep bezier curve snapping to the plane, the snap jumps to background objects.

Also I have seen once a plugin that make possible to select only visible parts of an object.
Alas I cannot recall its name.
I wiil appreciate if anyone could point it via a name or a link.

Thank you in advance.

@einstein said:

@pipinek said:

I have been using a shortcut to activate the toolbar.

How did you do this? I'm looking for just this option.

Shortcuts:

Tools/Vertex Tools/Edit Vertices

Here you can associate a shortcut. The Vertex Toolbar will appear.

@einstein said:

Hi!
It seems that among Vertex Tools' shortcuts there's no one to call the general toolbar. There are only hotkeys for particular operations but I'd like to press V and activate the plugin toolbar. It would be cool to add such an option I think. Just a suggestion

Thank you for the suggestion.

I have been using a shortcut to activate the toolbar.
I find it annoying to have to recall it every time using a single tool.

I wish it could be an option to keep the toolbar permanently on the screen.

Greetings,

Is there any possibility to have the toolbar kept on the screen instead of activated it each time one clicks on the empty screen?

Thank you in advance.

@tig said:

Unfortunately this tool has failed since mid-v2018 !
It is pretty old !
SketchUp changed the way that references to exploded items are handled.
So the cpoints in the temporary group are now deleted and recreated, rather than retained.
Thus the error, when they are no longer found...

Because the in the header is 'All rights reserved' it can't be changed by others and distributed...
I suggest you contact Chris Fullmer direct to see if he's prepared to correct it.
The method would be to attach a specific custom-attribute to each of the cpoints, then when the temporary group is exploded the recreated cpoints get the same attributes, so then in the exploded results the new cpoints can be recollected 'by attribute' in the same order, so they can be reused [before finally erasing them...]

Hello,

I do thank you for your piece of advice.
I will follow it.

Best regards

@sjs66 said:

Hi guys, I just installed this plugin for SU 2020 but when I click any of the Extended Views toolbars, all it seems to do is insert 4 guide points in a box shape. I tried changing my axis but no difference. How do you get it to work?

Greetings,

Indeed it would be awesome if this splendid tool could be compatible with SU 2020.
Any chance to get the uodate?

Many thanks in advance.

@anton_s said:

@pipinek said:

Oh, splendid.
Than you.

Alas I have noticed one issue with the plugin.
Once active whilst I open/activate a toolbar it is completely frozen. As if it does exist on the screen except its visual presence there.
The only way to touch it with the effect is to disable/unable an option Setting-Toolbar Containers. But in that case some docked icon are slightly displaced. Have to replace them.

I will appreciate any piece of advice.
Thank you in advance.

Could you elaborate what's going on, perhaps with a screenshot? I am not able to quite make out what's going on.

Hello,

There is nothing to be illustrated. Just opened toolbar. I cannot move it (a cursor becomes white while moving it on it) no button (tools) can be clicked.

When I uncheck the option Toolbar Containers (via menu, as above) docked toolbars disappear and then I can move the previously dead toolbar. After checking the Toolbar Containers (menu) all seems be back to normal. Except the docked toolbars which are displaced slightly, vertically.

Hope it is more clear, or less confusing.

Thank you.

PS
The same symptoms are present on different computers with SU 2020 Pro.
Also after SU opened there tool tooltips are not available.
Switching on/of Toolbar Containetrs (menu-widows-setting) make them appeared back.

@anton_s said:

@pipinek said:

Greetings,

Any chance to get an update for Su 2020?

Thank you

Hi! This plugin should work with SU2020 just as fine, provided you have the latest versions of the AMS Library and the Windows Settings plugins installed.

Oh, splendid.
Than you.

Alas I have noticed one issue with the plugin.
Once active whilst I open/activate a toolbar it is completely frozen. As if it does exist on the screen except its visual presence there.
The only way to touch it with the effect is to disable/unable an option Setting-Toolbar Containers. But in that case some docked icon are slightly displaced. Have to replace them.

I will appreciate any piece of advice.
Thank you in advance.

@anton_s said:

updated february 10th, 2012
Now works on windows 7 too!!! Well, read the 1st post for an info.

Thankyou, for your replies and comments!!! They really improved the plugin plus my English.
Somehow, therefore, I don't strugle at the english essays anymore... :berserk:

Greetings,

Any chance to get an update for Su 2020?

Thank you

@tig said:

If you have just two Plugins loaded in the Manager when SketchUp restarts there will still be just those two Plugins loaded.
The Plugins Manager lets you load/disable any Plugins you choose.
Because of limitations in the way SketchUp loads Plugins you can't dynamically disable them - they will stay loaded during that session.
However, if you disable a Plugin and restart SketchUp, then that disabled Plugin will not load at startup.
But of course you can choose to use the Manager to load selected Plugins during a session.
The orange button does a 'temporary load' - that is it loads just for that session, and when SketchUp restarts it is disabled once again...

You can select multiple Plugins in one go, for loading/disabling/temporarily-loading by clicking on them in the appropriate column in the dialog - holding the +Ctrl key to pick them one-by-one, or holding +Shift key and clicking on the first and the last the selected ones, this is just like any other Windows app...
Then you click the appropriate button [RGO] they'll move column and be re-colored to indicate what's just been changed...
If you pick some items wrongly you can simply re-click them to remove them from the selected ones before clicking the button.
If you've already moved them into another column you can move them back by highlighting them in that column and moving them across in the correct column...

Please get to understand how the load/disable/temporarily-load [GRO] buttons work on selected entries in the loaded and disabled columns...

Sets are an additional way of remembering your preferred collections of Plugins - for use during your different work-stages etc.
Look at using those once you are comfortable with the manual operation...

As explained, enabling manually or by 'set' is immediate, but disabling manually or by 'set' will require a SketchUp restart to complete the process.

Splendid.
I do thank you.
Now its clear for me how to deal with the set features.

@tig said:

Within the Plugin Manager load/disable Plugins as desired and use the Set [blue] button to open the Set-dialog, and type in a logical name, and click to "Add" a named set.
Create another collection of loaded/disabled Plugins as desired, again use the Set button to name then "Add" a new named set.
If you enter an existing name to Add then you are prompted to overwrite it...
Repeat as needed...
...

Thank you very much for ample explication.

I think I begin understanding.
And as far as I do, the set is simply saving the current loaded and disabled plugin in the Su session.

In order, for instance, to set/save a set with two plugins to be load next time SU starts I have to desable all plugins but these two and save ny set giving previously a name, right?

If this is true i find it a bit complexe and time consuming. Or perhaps there is a possibility to select a bunch of plugins to be activated/disabled.

I will be thankful for you confirmation or rectification.
Once more many thanks fir your instruction.

Greetings,

I will appreciate greatly any information of creating Sets (Set Manager) within Sketchucation Tools.
I have many pugins and I would like to organize them into proper sets.
Is it possible to group the chosen extentions and load them into SU at once using the Set Management feature?

Thank you in advance.

PS
Or perhaps there is a better way of coping with SU extensions?