Un bouquin très cool! 350 pages 1000 images!
Pas sûr qu'il soit encore disponible mais en bibliothèques...
51nogcWIquL.jpg

https://moiscript.weebly.com/geacuteomeacutetries-par-bemfarmer.html
Ici 50 fonctions by Bemfarmer!
Je mettrais peut-être à jour les nombreuses autres fonctions by Bemfarmer!

Cyclides de Dupin

273872652.jpg

Feather 3D : Double Space Bar tap for align on the 3 Views!
With tablet it's just double tap with finger 😉

@HornOxx !Solved!
I finally found it out for myself! 🙄

I had to take out this check mark (but you all knew that already I think 😉)
186943a2-e71c-4d63-a7f8-f26625fad4aa-image.png

@Rich-O-Brien said in TM sketchup interior:

@L-i-am I like this version. The bathroom only diverted my eye.

Plant needs some work but lighting is a vibe. Good job

You were correct about the plant but I attached the wrong image that timePlant.jpg

@Dave-R
It's to be able to sample the texture to paint some geometry.

Typically urbanism. I get landscape bitmap drawings that I need to scale to match the DWG.
Then I need to explode the image to paint the mesh that I start to build with quadfacetool, vertextools and subD ( I use vertextools ability to keep the texture UV while editing the vertex).
Sometimes I use Google Earth images too, and trace the roads first, then start building quads.

Once I start moving the vertex, and break the planeity, the texture gets exploded and I use the source image to sample the texture scale and orientation ( by using the projected mode) and repaint the messed up geometry.

When creating complex terrains, I group the parts to keep the subdiviions fast. And once a group is created, I can't see the source texture anymore so I can't trace upon it.

When using DWG style vectorised drawings, there's no problem as the source remains visible when you're in a group (and the source drawing outside the group), but with bitmaps, you need it inside the group to be visible unless it's an image.

So I'd like to be able to keep the visibility of a bitmap in all circumstances, wether inside or outside a group..

Or, being able to sample an image and use it as a texture without having to explode it first.

@ntxdave We only support 2021 or higher. 2020 is not supported.

There’s no time-limited trial, you can use it for free as long as you like but the free version has a small watermark.

Cheers,
Thomas

@MarcusLeon
No. A clip is attached to the model, because it references objects in the model.

Version 3.6.8 - 06.28.2024

Added the following built-in ICF (block) materials: Nudura, Fox Blocks. Added the following Simpson column bases to the post module: CPT44Z, CPT66Z, CPT88Z

wall_su782_800.jpg

wall_su783_800.jpg

@ntxdave
The current version of SketchUcation Tools works on versions >= v2017
If you have bundles relating to other versions [newer or older], then you should be able to use them in v2020...

Here's the fix for anyone with this issue:

Window > Preferences > Graphics, and set the Graphics Engine to "Use Classic Graphics Engine"

@mbarker
I've replied to you in a PM

I just tried it on v2024 and it works fine... although most of it is over a decade old !
It imports a text file with a camera-view on each line.

The camera-view entry must be as follows...
name,xeye,yeye,zeye,xtarget,ytarget,ztarget,rollangle,fovangle
there can be an optional value added after 'fovangle':
,image
But you probably aren't wanting to use that.

The values in the entry must be separated with the constants that are set in the RB file:
Edit the ICVSEP and ICDSEP constants to suit your typical file's locale value-separator [' ',;:\t] and decimal.separator [. or ,]...
In the example I show it's as a comma , separator and a .
You might use a space or ; and a , to suit locale.
Please check you are setting up you file correctly.

As I said it works fine given the correct input.
To attach an RB file just drop it into the message
TIGimportcamera.rb

There are donation buttons against many authors entries in the PluginStore and ExtensionStore³

@ameerproxy said in SCFLicense: Extension Licensing on Sketchucation:

@Rich-O-Brien Perfect , Thanks for the quick support , so same for other plugins to re validate the license

Is Fredoscale working as expected?

If yes, please repeat the steps using the appropriate license to activate other extensions

Version 2.0.0 - 06.27.2024

Fixed a bug in the rebar module for stemwall step assemblies. Added the following Simpson column bases to the built-in library: CPT44Z, CPT66Z, CPT88Z

foundation_su128_800.jpg http://design.medeek.com/resources/foundationplugin/images3/foundation_su128_800.jpg

Hi @samuel_t

MATERIAL NODE
What I meant was, if it is possible to handle material parameters like

color opacity image source (path) image size x image size y

The use for this would be, creating a material, and two or more bitmap nodes, this way is fast to change and test different material settings, eg. by switching between the two bitmap nodes.

SLIDER NODE
A slider node for fast and easy way to change values, and seem them change without having to think about a number - just watching the result.

COMPONENTS
Would it possible to use components instead of groups? it would be very usefull to copy components around, and when you edit one, you edit all.
It might allready be possible, and I have just overlooked it.

An example - a simple hotel - I created one component, use nodes to construct the hotel and BAM. It could hotel rooms, as components, that can be copied around.
Then it's easy to add details and update the whole project in one operation.

In the example I created a component, the single one on the left. I then used Node editor to copy the component, but they become groups, and when I change the first component - nothing happens - of cource.

Could be interresting 🙂
Jorgensen

10.JPG 20.jpg

Well I thought the update fixed it but nope. Back to having issues with the paint bucket tool. meh

@alsomar said in [Plugin] QuadFaceTools:

other software such as Substance Painter or RizomUV may struggle to handle these duplicates correctly

Hi Alejandro, I have no problem at all in Substance with QFT obj files (I can even bake hipoly objs into low poly objs with no issue).

BTW it's a known problem and has been there forever.
There's also a problem with unwelded UV islands (the UV are in the right places but actually each quad has cuts/seams at all edges).

I shared a few info and workarounds about this problem years ago, but unfortunately Thom is really busy and apparently doesn't have time to fix it for now, so we still have to use workarounds.

https://community.sketchucation.com/topic/129714/plugin-quadfacetools/634

The workaround in 3dsMax I mentioned in that post is outdated.
Now I just filter the selection for polygons with 3 sides (in the selection tab) and erase all of them.
In some cases I also export from QFT to Blender and then export an FBX to 3dsMax.

@grizzler Glad that you got it sorted 🙂

@Mike-Amos The 2024 upgrade is the best one I've ever seen, normally they're just a nuisance but this one is worth the effort.

@aleathompson520 share the .skp file so we can see what you are working with.

@ianpemb496 said in [Plugin][$] RoundCorner - v3.4a - 31 Mar 24:

How do I transfer the licence

You can release seats by following the guide:
https://downloads.sketchucation.com/licensing/SCFLicense-Instructions_to_Users.pdf

Or at https://sketchucation.com/webshop/my-licences.php if you kept Sketchucation Tools and Libfredo updated