I didn't but I'll look later. Might be too rustic. I've been using a material from poliigon.com which I thought was close enough but apparently there's someone at the homeowner's association with nothing better to do.
![](/uploads/imported_avatars/upload/2cde590848b478d382d186ea9f7f6116_12739.png)
Posts made by Gus R
-
RE: Custom Stone Veneer Texture
-
Custom Stone Veneer Texture
I didn't know where to post this but I'm looking from someone to create a more accurate stone veneer texture for a rendering I'm working on for home owner's association. Is there a website or someone on here that would be able to assist me in this matter?
-
RE: Having issues with 2022SU plugins
Open up Ruby Console.
Extension: Developer: Ruby Console.
Leave it open and it will pop up every time you start up SU. Go through whatever process you're doing and see if there are any warnings, etc. Then post them here.
I was having problems with Extension Store yesterday and got stuck in this continuous loop trying to load a lot of Fredo's plugins. I backtracked and installed it the traditional way and it worked.
Probably not related but SU 2022 requires .NET Framework version 4.5.2. I guess anything might help when troubleshooting.
Additionally, sometimes incompatible plugins can cause a lot of problems. Try the Ruby Console for the time being.
-
RE: More Fredo6 plugins becoming paid extensions
Everything is up to date.
After fumbling around I'm all set now and everything is licensed.
@chon said:
Hello,
@gus r said:
I'm getting the following error when trying to install Fredo Corner.
This is from a regular install through Extensions Manager.
Is your LibFredo6 up to date ?
-
RE: More Fredo6 plugins becoming paid extensions
After getting stuck in a rabbit hole using Sketchucation Tools it does load and work but then as I started I can't get it to validate the license that I purchased as SCF_Purchased_License_RoundCorner_NORMAL_20220401.scflicense.
It's looking for FredoCorner.scflicense
The rbz is FredoCorner_v2.5a.rbz which is the latest and the library is also the latest.
-
RE: More Fredo6 plugins becoming paid extensions
I'm getting the following error when trying to install Fredo Corner.
This is from a regular install through Extensions Manager.
` C:/Users/Z590-E/AppData/Roaming/SketchUp/SketchUp 2022/SketchUp/Plugins/forwardable.rb:115: warning: already initialized constant Forwardable::VERSION
C:/Program Files/SketchUp/SketchUp 2022/Tools/RubyStdLib/forwardable/version.rb:3: warning: previous definition of VERSION was here
C:/Users/Z590-E/AppData/Roaming/SketchUp/SketchUp 2022/SketchUp/Plugins/forwardable.rb:116: warning: already initialized constant Forwardable::FORWARDABLE_VERSION
C:/Program Files/SketchUp/SketchUp 2022/Tools/RubyStdLib/forwardable/version.rb:4: warning: previous definition of FORWARDABLE_VERSION was here***************ERROR LibFredo6 Menu **************
Sketchup = 22.0.354
Platform = x64-mswin64_140
title = Round
Ext =
@submenu =
@menu_name = FredoCorner
@su_menu_name =
C:/Users/Z590-E/AppData/Roaming/SketchUp/SketchUp 2022/SketchUp/Plugins/set.rb:381: warning: already initialized constant Set
C:/Program Files/SketchUp/SketchUp 2022/Tools/RubyStdLib/set.rb:70: warning: previous definition of Set was here
File load error (C:/Users/Z590-E/AppData/Roaming/SketchUp/SketchUp 2022/SketchUp/Plugins/set.rb):
Error: #<TypeError: superclass mismatch for class SortedSet>
C:/Users/Z590-E/AppData/Roaming/SketchUp/SketchUp 2022/SketchUp/Plugins/set.rb:384:in<top (required)>'
-
RE: SketchUp Pro 2021 - constantly crashing
Try giving thomthom: CleanUp v3.4.3 a shot.
Be sure and leave "Erase Hidden Geometry" and "Erase Stray Edges" unchecked which can delete hidden groups, components and line work you may have.
Run it twice. Make sure to save a duplicate file first. Like Dave said it could be anything but this sometimes worked for me.
-
RE: ClothWorks License broke - deadline tomorrow!
Thanks Rich.
@rich o brien said:
@gus r said:
What should I do?
Send an email to support[at]sketchucation.com with the email address associated to the license
-
RE: ClothWorks License broke - deadline tomorrow!
Anton,
Through getting a new computer and dealing with an OS crash yesterday I have 0 seats left for my license. It's showing 3 seats of 3 used with 0 left and I only use one seat. What should I do?
-
RE: Explode Image
I tried it with another image and it was working fine. Then I saved another image from the PDF (site plan) and it also worked normally. So I went back to the one that I couldn't explode and it was back to normal. Very strange things happening.
-
Explode Image
Is there a new way to explode an image with Sketchup 2022 (latest update) because normally you just right-click on the image and explode it with other options.
Right now when I right-click on an image the only options showing are for selections: Invert Selection, Make Component and Make Group.
Reset shortcuts and that wasn't it and it's working in 2021.
Try it.
-
RE: Sketchup 2022, worth it?
Maybe I should try the free version because I'm paying $299.00 a year for mine.
@box said:
I've found 2022 to be the fastest most trouble free version I have used.
So be aware that personal experience can vary greatly. -
RE: Sketchup 2022, worth it?
I've never encountered as many glitches and bugs than I have with Sketchup 2022.
-
RE: Space Bar As Enter Functionality In CleanUp - SU 2022 Pro
Yes. I don't remember when I started using the space key for OK while using CleanUp. I was churning through a bunch of Vray proxies from Vizpark to clear them from errors while trying to debug the V-Ray caused bugplats in Sketchup. It's a close click away when you're in production mode.
It was working in 2022 before the update and still works in 2021. Both were able to function that way in addition to changing over to the select mode. Not really a big issue. I frequently change around shortcuts for specific tasks I'm working on.
Sketchup could sure use macros for routine tasks. Always did.
-
Space Bar As Enter Functionality In CleanUp - SU 2022 Pro
I just updated Sketchup 2022 Pro and seem to have lost the "enter" function for the space bar for certain tasks. Was just using it all afternoon on 2022 and it's still working in 2021. Anyone else experiencing this?
Was using it as enter for CleanUp. I know it's for Tools/Select but for some reason it was working as "OK" for CleanUp Validity Check both in 2021 and the previous version of 2022.
-
RE: CPU Overheating Question
I just noticed that's an Asus P8P67 LE motherboard. My previous computer before upgrading to a new machine has an Asus P8P67 Deluxe motherboard. I replaced the old i7 2500K CPU with a i7-3770K and got a new Deepcool Neptwin CPU fan which I decided not to install because I'd have to remove the motherboard to install the new backplate for the CPU because there wasn't enough access in the back on my Scout case. So look out for anything like that.
-
RE: CPU Overheating Question
Yeah, could be the thermal paste is old and cracked. Also get some thermal paste cleaner like ArctiClean which I've used before. Get some Q-tips and be careful. Might want to get a can of compressed air and blow out the chassis and a new and better fan/heatsink. Don't let it go because you can fry your motherboard. Don't put too much new thermal paste on the CPU.
-
Can't Read V-Ray Frame Buffer Status
As the title suggests, I can't or can barely read the V-Ray Frame Buffer (VFB) Status on the lower bar of the VFB while rendering. I was going to ask this question at the Chaos forums but I can't post there since I'm using the trial (free) version of V-Ray for Sketchup. I though maybe adding "VRAY_VFB_UI_SCALE" in System Properties: Environmental Variables to 3 would change the size but that didn't work.
My screen resolution is at 2560 X 1440 and I know decreasing that will increase the font sizes but not the font color which I can barely read. Anyone have any ideas or is this a bug or something that was overlooked? I know I can see the status under stats in the left column.
It's on the lower right.