sketchucation logo sketchucation
    • 登入
    Oops, your profile's looking a bit empty! To help us tailor your experience, please fill in key details like your SketchUp version, skill level, operating system, and more. Update and save your info on your profile page today!
    🔌 Smart Spline | Fluid way to handle splines for furniture design and complex structures. Download

    [Plugin] FredoTools::ThruPaint - v1.3a - 20 Oct 16

    已排程 已置頂 已鎖定 已移動 Plugins
    331 貼文 102 Posters 537.5k 瀏覽 102 Watching
    正在載入更多貼文
    • 從舊到新
    • 從新到舊
    • 最多點贊
    回覆
    • 在新貼文中回覆
    登入後回覆
    此主題已被刪除。只有擁有主題管理權限的使用者可以查看。
    • R 離線
      rv1974
      最後由 編輯

      what a comprehensive support! Frankly I don't deserve it )
      The last sentence improvement would be a killer!
      Thank you so much!

      1 條回覆 最後回覆 回覆 引用 0
      • pilouP 離線
        pilou
        最後由 編輯

        @unknownuser said:

        I will need to find or develop a small algorithm for quadifying a face nicely.

        QuadfaceTools by Thomthom ?
        Or the quadrilaterizer by TiG ?

        Frenchy Pilou
        Is beautiful that please without concept!
        My Little site :)

        1 條回覆 最後回覆 回覆 引用 0
        • pilouP 離線
          pilou
          最後由 編輯

          La quadrature du cercle alors! 😉

          Frenchy Pilou
          Is beautiful that please without concept!
          My Little site :)

          1 條回覆 最後回覆 回覆 引用 0
          • fredo6F 離線
            fredo6
            最後由 編輯

            @rv1974 said:

            what a comprehensive support! Frankly I don't deserve it )

            Just to be clearer, the density of the mesh is the only way to get the texture 'reasonably' distorted. When quads are too much like a triangle, the perspective distortion shifts the texture mapping.
            Asphalt 1.png

            In the case of your texture, that may help to do the trick, but it's a pity to have to generate so many faces
            Asphalt 2.png

            @Pilou
            It is not so easy to generate the right mesh in the general case (and in this particular case).
            Asphalt Quadrilaterizer.png

            ...and QuadFaceTools only manages quad meshes which it can triangulate, but not any polygon.

            I think Whaat has developed an more adapted algorithm as part of SketchUV.

            Fredo

            1 條回覆 最後回覆 回覆 引用 0
            • alvisA 離線
              alvis
              最後由 編輯

              Thank you very very very very much.

              1 條回覆 最後回覆 回覆 引用 0
              • T 離線
                tina0603
                最後由 編輯

                thanks!!!!

                1 條回覆 最後回覆 回覆 引用 0
                • P 離線
                  Pherim
                  最後由 編輯

                  Absolutely stunning! One of the best plugins I have seen so far (besides your others)! I think I will never use the native paint tool again.

                  And it's free! You are amazing!

                  1 條回覆 最後回覆 回覆 引用 0
                  • W 離線
                    wolfy
                    最後由 編輯

                    @unknownuser said:

                    @wolfi,

                    It might be a conflict with another plugin, which you would not have in the PC at the office.
                    Do you have any plugins dealing with materials or UV mapping?

                    For this, ould you type in the Ruby Console Sketchup::Material.instance_methods.join("\n") and advise on what it returns.

                    Thanks

                    Fredo

                    Fredo,
                    Entered your code into ruby console and it returned the following (sorry in advance for the length):

                    dclone
                    write_thumbnail
                    profile_member?
                    methods
                    attribute_dictionaries
                    get_attributes
                    remove_observer
                    instance_variable_defined?
                    taint
                    name
                    name=
                    id
                    set_attribute
                    singleton_methods
                    respond_to?
                    entityID
                    nil?
                    send
                    protected_methods
                    get_attribute
                    tainted?
                    display_name
                    untaint
                    instance_of?
                    typename
                    equal?
                    method
                    hash
                    private_methods
                    attribute_dictionary
                    send
                    materialType
                    kind_of?
                    freeze
                    eql?
                    object_id
                    has_attributes?
                    id
                    public_methods
                    instance_eval
                    deleted?
                    is_a?
                    delete_attribute
                    type
                    valid?
                    instance_variables
                    use_alpha?
                    frozen?
                    alpha
                    to_a
                    alpha=
                    class
                    <=>
                    instance_variable_get

                    between?

                    parent
                    color
                    to_s
                    extend

                    =
                    <=
                    color=
                    clone
                    instance_variable_set
                    =~
                    <

                    model
                    texture
                    inspect
                    texture=
                    display
                    add_observer
                    dup

                    1 條回覆 最後回覆 回覆 引用 0
                    • S 離線
                      SpookyChick1013
                      最後由 編輯

                      Thank You Fredo. This looks like the answer to many of my prayers. Looks like it shall be an interesting week, finally revising some old projects.

                      https://kuromatsudriveyards.com

                      Fo-su to tomo ni aran koto o...

                      1 條回覆 最後回覆 回覆 引用 0
                      • C 離線
                        cmoreink
                        最後由 編輯

                        Amazing plugin Mr. Fredo! Thank you so much for all your plugins and hard work. Can't call you a G.O.D. but you are sitting right next to him 😉

                        my portfolio

                        1 條回覆 最後回覆 回覆 引用 0
                        • pep75P 離線
                          pep75
                          最後由 編輯

                          Jiiiiiihhhaaaaaaaaaaaaaaa!!!!!!! 😳

                          1 條回覆 最後回覆 回覆 引用 0
                          • P 離線
                            Pherim
                            最後由 編輯

                            Played around with it for quite some time now and still I am amazed about what this plugin can do.

                            If I may ask, would it be possible to add an option that allows to chose the scale of the texture before applying it and then keep that value until it is changed? That would save a lot of time in comparison to changing the scale of each texture manually after it was applied.

                            1 條回覆 最後回覆 回覆 引用 0
                            • fredo6F 離線
                              fredo6
                              最後由 編輯

                              @pherim said:

                              Played around with it for quite some time now and still I am amazed about what this plugin can do.

                              If I may ask, would it be possible to add an option that allows to chose the scale of the texture before applying it and then keep that value until it is changed? That would save a lot of time in comparison to changing the scale of each texture manually after it was applied.

                              That's a good idea, but I would put it as an option.
                              Note you can also change the material definition (i.e. the dimensions).

                              Fredo

                              1 條回覆 最後回覆 回覆 引用 0
                              • P 離線
                                Pherim
                                最後由 編輯

                                @unknownuser said:

                                Note you can also change the material definition (i.e. the dimensions).

                                Of course you can but often enough I have a model where I wish to use the same material in different scales and having an option to choose a different scale before applying a material would be great!

                                1 條回覆 最後回覆 回覆 引用 0
                                • KrisidiousK 離線
                                  Krisidious
                                  最後由 編輯

                                  @unknownuser said:

                                  Remembering of last scaling and rotation factors by material.

                                  OH MY... AWESOMENESS....

                                  By: Kristoff Rand
                                  Home DesignerUnique House Plans

                                  1 條回覆 最後回覆 回覆 引用 0
                                  • pilouP 離線
                                    pilou
                                    最後由 編輯

                                    About the first option
                                    Yet existing for a multiple selection with normal use of SU?

                                    Frenchy Pilou
                                    Is beautiful that please without concept!
                                    My Little site :)

                                    1 條回覆 最後回覆 回覆 引用 0
                                    • J 離線
                                      jorge2011
                                      最後由 編輯

                                      fredo, thank you very much for this new update.

                                      A query. Is possible to copy the material properties (rotation, scale, etc ...) and paste those properties to other faces?

                                      1 條回覆 最後回覆 回覆 引用 0
                                      • EarthMoverE 離線
                                        EarthMover
                                        最後由 編輯

                                        Great update Fredo! This was my only issue with the tool. Now it is perfection!

                                        3D Artist at Clearstory 3D Imaging
                                        Guide Tool at Winning With Sketchup
                                        Content Creator at Skapeup

                                        1 條回覆 最後回覆 回覆 引用 0
                                        • fredo6F 離線
                                          fredo6
                                          最後由 編輯

                                          @jorge2011 said:

                                          fredo, thank you very much for this new update.

                                          A query. Is possible to copy the material properties (rotation, scale, etc ...) and paste those properties to other faces?

                                          You have the transfer UV mode, which allows to substitute a texture by another without changing the UVs.

                                          Otherwise, if the faces are adjacent to the painted faces, just click and drag to extend the painting.

                                          Fredo

                                          1 條回覆 最後回覆 回覆 引用 0
                                          • thomthomT 離線
                                            thomthom
                                            最後由 編輯

                                            @jorge2011 said:

                                            A query. Is possible to copy the material properties (rotation, scale, etc ...) and paste those properties to other faces?

                                            If the mesh is made out of Quads you can use QuadFace Tools to copy and paste UV mapping.

                                            Thomas Thomassen — SketchUp Monkey & Coding addict
                                            List of my plugins and link to the CookieWare fund

                                            1 條回覆 最後回覆 回覆 引用 0
                                            • 1
                                            • 2
                                            • 3
                                            • 4
                                            • 5
                                            • 6
                                            • 7
                                            • 16
                                            • 17
                                            • 5 / 17
                                            • 第一個貼文
                                              最後的貼文
                                            Buy SketchPlus
                                            Buy SUbD
                                            Buy WrapR
                                            Buy eBook
                                            Buy Modelur
                                            Buy Vertex Tools
                                            Buy SketchCuisine
                                            Buy FormFonts

                                            Advertisement