I have been awol for a couple days and am just now checking.

For what I am doing this will help tremendously. Thanks a million Jon 💚

so what are the square panels called? decorative? that are tiled all over? decorative ceiling panels?

Thanks Ron,

The company I work for does all of Ruud Lightings trade show exhibit work and these will come in handy!

or maybe a nice necklace draped over it...

No problem.

Yes thanks.

Your table is awesome.

I rendered it in Kerkythea and it looks great.

Here's one that I just made, it's sketchy physics enabled. To bad I cant get the lower rings to stay on.

Barrel.skp

Yes, Brad has posted it in the SU Forum above, too:
http://www.sketchucation.com/forums/scf/viewtopic.php?f=15&t=2805

Nice thing probably (I couldn't try it yet)

Furniture grade oak plywood. I pencil everything out on the center sheet. Then I apply the stain so it just goes slightly over the pencil marks. That way there is a lot of raw wood to make a good bond with the glue. If you glue first the squeeze out will seal the wood so it will not take stain at the joints.

Also you need to support the door evenly during glue up because the individual sheets will not resist bending and if they bend during glue up the door will be permanently ruined. I framed the pantry door nicely. The frame on the bathroom door is warped because I forced it. Somethime in hte next decade I need to tear it out and try again.

Thanks for sharing.
Mateo.

@dave r said:

How would one draw a ghost in SketchUp? 😄

With hidden edges..? 😉

Nice. I did a bench mounted drill press not too long ago - your bench press is different.

Dave,

Thank you!

@dave r said:

I must be blind. I can find Special Interest forums at all.

No you are not Dave, the idea was premature and got held off until after the transfer is completed. We will revisit the idea of a WW sub-forum real soon.

@dave r said:

Thanks Eric. FWIW, I do try to keep file sizes down when I make my models. Of course they aren't as small as they could be but they are dimensionally accurate and you could take them apart and make working drawings for your wood shop from them.

And that is why I like you to post them 😄 The more ways I can learn to build anything with wood the better off I am.
Thanks.

Thanks.

Pleasure, i'll upload new componants when they are finished

Masta,

See, the transfer of the Newbie Forum was not totally useless. Have a look at the very first post here (a reply to your very last post at the old board) after the transfer has finished.
😄

Thank you, sir. I like them, too. 😉

Thanks, Ron!