@kyyu said: Try this: thanks I will give it a try!

So I was wrong in everything I said Yes it was part of some longer piece, I copy and pasted it wrong, sorry.

My idea of using a temporary group means that the faces in the group are all that's needed to consider for reversing - so it very quick; if you are making lists of all entities before and after a pushpull then there might be thousands of them to sift through, twice! ... So why not make a group, add a circular face, pushpull it, reverse the faces in the group, re-add a circular face to the group and erase it, then add a circular face to the main-face and erase it to leave a hole over the grouped 'recess', and finally explode the group? It will be much quicker in most circumstances... and 'safer' too...

@dan rathbun said: But I think his intention, is to do batch mode export to dae for a whole dir of skp files. So manual drag-n-drop is out of picture. He can use a shell script, no doubt,... ... but he could also do batch export, from within SU Ruby. You can drop multiple files onto a MAC command file or an 'applet', they are processed in turn, so the code could in turn make txt>>rb, open each SKP dropped; the rb file doing the SKP export, renaming itself txt and closing the SKP for each one. A much simpler way to export a folder of SKPs as .dae is to have a permanently loaded Ruby tool - I quickly wrote this as an example... http://forums.sketchucation.com/viewtopic.php?p=347277#p347277

I fixed a few things and realized I could call the instances I added to the global component by different names. It does run slow but I still haven't looked into optimising scripts so hopefully I can speed it up some though I don't mind it though, it's faster then creating a cabinet from scratch. Next on the to do/ to learn list is... Creating door and drawer fronts, creating drawers... shouldn't be a problem. Add a user defined number of shelves and insert them evenly spaced in the cabinet... I can do this manually/individually but the math involved in doing them automatically should be fun to figure out! Same thing for door and drawer fronts. And give a choice of creating an upper or lower cabinet since the building of these is different... I could use 2 different scripts like I did when moding the cab.rb script but I think it would be slick having it all-in-one. Add grain direction And eventually learning how to export the to a csv file so that I can populate an existing excel spreadsheet that I use... yes I know there are already some cut sheet/list scripts but this is more of a hobby/learning experience and I'd like to see what I can do. That should be it but I'm already happy with the progress I've made in just 3 or 4 days or learning this stuff. Again thanks for all the help I really appreciate your teach how to fish approach. Frank Test.rb

What are the UV coordinates you're getting that's so huge? I'm not sure if I've understood the issue. Is it with distorted textures?

It's been a bit back and forth. I think it might be a combo - depending on what you do. Even they find the topic troublesome.

@jim said: jQuery 1.6.2 released. Beware to read the change notes from 1.5.x to 1.6.x if you are upgrading.

Please don't reuse references or confuse them with methods etc - coding is complicated enough as it is I suggest you prefix new groups with a single meaningful letter, and suffix their entities with 'ents' So 'sgroup' > 'sents' and 'rgroup' > 'rents' etc. Then any other reference to 'step' or 'rail' will pass without incident... And you can easily spot the relationship of s=step and r=rail For example, I always call my temporary group 'tgroup' and its entities 'tents'.

@tig said: Can't you can simply .... After having explained that using the title bar text is problematic (and subject to a bug while loading on Windows,) you still advise doing it? Again, the "Untilted" string is NOT the same on all language localizations, and some contain unicode characters. It's also possible that a SKP filename could contain unicode characters. Then you add two more situations that can "throw a shoe in the works". @unknownuser said: **, the designer and original implementor of C++":37wih2kn] "If you think it's simple, then you have misunderstood the problem" [floatr:37wih2kn]Did you really really say that? - Bjarne Stroustrup's C++ FAQ[/floatr:37wih2kn]

@jhyuk said: Thanks a lot!!! I was able to change the symlinks and make it use 1.8.7 of the mac and copied the socket.bundle from that version and everything is working fine!! Now wouldn't it be nice if Sketchup had a button that you could press or a checkbox and it automatically used your full system Ruby install instead of that old v1.8.5 initial dead release ??

A line added in code will NOT split a face/edges unless you call some sort of entities.intersect_with() method... If the line is being added in in code you can check the picked points with a pick_helper to see if a face is picked under the point. Then you know the face is under a point, what the face is and then check that both points are on the same face ? http://code.google.com/apis/sketchup/docs/ourdoc/pickhelper.html#picked_face

@unknownuser said: How is thomthom doing the Bezier Surface? Ruby only? Currently in Ruby. But once I get things working and I can start profiling I'll probably move some stuff into a C Extension to do the main bulk of the bezier calculations etc.

@aerilius said: Since I'm relatively new to ruby/plugins, I haven't yet dared to propose SketchupExtension in the Plugin-Installer-Tool discussion, I did. I asked Dana to have a look at my example, in another topic. @aerilius said: ...but also because I had the impression that in its current state, it is neither useful to users nor was I sure whether it's well designed (I can not really judge about that). Well, there is a difference between the Ruby functionality, and the Application UI functionality. Most users hate the Preferences dialog panel interface, for several reasons: Too small, only shows limited number in the list.* Panel cannot be sized.* The amount of attribute data displayed is fixed.* The list cannot be sorted (it's shown in load order.) Now... the Ruby functionality issues (or short-comings,) have prevented others from creating a better manager. The most glaring is the one Dana is working on, that is "one-click" installation and updating. This is also the number one complaint. @aerilius said: I think it's important for this discussion that we know if it's necessary to invent our own "standard" how to manage/disable plugins, It's more important that rubyists use a common class, that can be extended. For instance, we already have the issue where some plugins are Smustard Organizer compatible, but not SketchupExtension compatible, and visa versa. There are quite a few plugins (a most all of the Google authored plugins,) that already use SketchupExtension class instances. It does make sense not to orphan them. @aerilius said: or if SketchupExtension could once become a serious possibility (with some overhaul ). YES, and I've already done an overhaul, for my own use, and proved to myself that the class can be improved greatly (and the few current bugs fixed.) BUT.. I don't "own" the class, it's a standard API class, so I can't release the code. I have about $2500 labor into it, and was wondering, if anyone would be interested in donating toward it. If a "donation piggybank" reached that amount I'd release it. (I wonder if I can convince 100 people to donate $25, or 2500 to donate a buck?)

The problem was in the file,not in the code. I have saved the file in notepad as UFT-8 ,so I can "unpack" the character. I have tried to save the file in other formats (unicode,ANSI,unicode big endian) and is always giving me errors. So only UFT-8 is ok. Problem solved

Moved.

I've moved this into the Developers' Forum as it's a general issue... You can get info about a curve. verts=curve.vertices returns the vertices, so if it's an arc etc then vf=verts.first and vl=verts.last are the end vertices. You can also get the start and end edges with ef=curve.first_edge and el=curve.last_edges You can get the edges that use any vertex with edges=vertex.edges so do that for vf and vl in turn - the array of edges will include the curve's edge so fedges=vf.edges; fedges.delete(ef); fedgeyouwant=fedges[0] ditto for vl/ el So you now have a way to find the two edges connected to ends of an curve. This assumes you have checked it's a curve, it's not looped etc; and if there isn't a connected edge you get 'nil'. or if there are more than connected edge then only the first one found is returned...

Yes, one has to use a combo. If you look at the jQuery source you see the various methods they use to make it cross platform compatible. onReadyStateChange is used as a fallback for older IE versions. Mozilla, Opera, Webkit and newer IE use DOMContentLoaded. http://ie.microsoft.com/testdrive/HTML5/DOMContentLoaded/Default.html

@mac1 said: What criteria is used to determine smoothness is good enough?? RMS error or?? I was thinking that, from a user's point of view, one set a max angle. That the segments connecting each other would not exceed this max angle. Though, I am open to other definitions.

Thomthom you are right! Here is a fixed version if (pth=model.path).empty? ### do stuff with an alternative path else ### do stuff with 'pth' as it's not empty end