OK, I made sure I drew the circle on an axis (red) and then I created the arch (see image below). However, once again things are correct. If you look at the image, you will see a gap and the points where the arcs connect to the circle are not properly aligned. I do not understand what I am doing wrong.

I used the green axis But I will try the red axis and see if it makes a difference. I will also make sure that when I draw the circle again that I follow the axis when drawing the circle. As I am typing this response, that is probably what I did wrong. Don’t give up on me. ️

@Box said in Box Exercise Discussions:

My guess would be your circles are not drawn on axis. Not at a computer so can't check your model.

I thought they were. I will try agin, tomorrow I hope.

@Box said in Box Exercise Discussions:

Look for the tooltips that tell you midpoint or end point etc

Box, I have tried many times now and I cannot get a smooth arch/connection between the two circles and therefore I am not getting a good outline for creating the model. Are there any tips you can give me for creating a connecting arch that will give me a smooth outline for creating the object in your example?

@Dave-R I did make the adjustments you suggested and I did a better result but I am having problems based on what I have asked @Box about.

As I have said before, I have used SU for several years now but for a very concentrated set of models and now I am trying to expand my skills and am not making very good progress.

@Rich-O-Brien said in I’ve Been “Boxed”:

let me know by tagging me in that new thread and I'll move this sidebar.

Not sure what you mean by tagging you.

Here is the new thread I have created: Box Exercise Discussions

I am having a problem learning how to use one of Box's examples.
Here is my model: Box Practice 1.skp

@Box

Here is my skp file: Box Practice 1.skp

@Box said in I’ve Been “Boxed”:

@ntxdave said in I’ve Been “Boxed”:

Apparently, I am not not drawing the arc between to circle correctly.

Make sure you get the magenta inference. The start and end points of the arc should be in the same relative segments of the circles. Often best to use a segment Midpoint rather than an endpoint. And it needs to be at a point that will flow smoothly with the circle.

@ntxdave said in I’ve Been “Boxed”:

I have to use the TIG Weld feature to connect the lines so I can use them for the path for the Follow Me tool.

Well yes, but all I did was triple click to select all of it as the path. Weld allows you to select it with one click.

@ntxdave said in I’ve Been “Boxed”:

I get the outline in the face and I have to go erase the outline.

I double click on the face, which selects the face and it's edges allowing it all to delete in one go.

@ntxdave said in I’ve Been “Boxed”:

Here is the file from what I did for this exercise

Looking at your model it is clear you haven't connected the arc smoothly.
And the circle you have in the middle of the shape is drawn Off Axis, so it will not line up correctly with the rest of the model.

I am still having a problem with connecting the circles. Do you have a suggestion/advice about how to correctly connect the circles? How do I get a reference to the segment Midpoint?

Thanks for the response/repoy. Hopefully I will be able to try again later today. Again, I really appreciate you giving me instructions in how to get this wright. Eventually I want to be able to draw things like the first picture in you thread. Be I need to hone my skills first.

@Box said in I’ve Been “Boxed”:

@ntxdave said in I’ve Been “Boxed”:

I do have a little problem with in the videos is that he obviously enters info in the text boxes that you cannot see in the video.

Can you link to one that you are having an issue with.

Here is a link to the gif I have been having some problems with..
link text

• Apparently, I am not not drawing the arc between to circle correctly. I wind up with some connections that are not as clean as the should be. After i draw the five sides, I have to use the TIG Weld feature to connect the lines so I can use them for the path for the Follow Me tool.

• Once I have created the design using the step above, I then cannot delete the inside faces. When I do get it to work, I get the outline in the face and I have to go erase the outline.

• I do not have a problem with the "bottom" part of the design.

• Then, I wanted to try something a little different from your design. I wanted to create a whole through the top item that matches the bottom part of the design. Again, I had some problems trying to cut a hole in the top part.

All of this is my first item in your excellent set of topics. After I get some more experience, I want to learn hor to create some of the things others have posted in this thread. In particular, I would like to learn how to create something like the lamps with the items around them (do no know the correct term to use).

Again, I want to thank you for sharing the items in your thread. They are very useful, and I want to expand my capabilities.

BTW: Here is the file from what I did for this exercise: Box Practice 1.skp

@Box I apologize Box. I just went and watched the gif again and somehow I messed the text entries before. I am very embarrassed.

Thanks guys. I will stick with thr Pro license.

@Dave-R said in A Bench and a Stool:

Their arrangement with Chaos Group for the Studio subscription makes better sense than including a full renderer in SketchUp from a development and management point of view, too.

Can you elaborate on this a little more or tell where to look this up?

@tuna1957 I have been trying that but so far am not doing very well (making me feel pretty dumb). 🤪

On thing I do have a little problem with in the videos is that he obviously enters info in the text boxes that you cannot see in the video. I will continue watching and figure things out. Maybe this is what happens as we age and are away for a while.

@Dave-R well done sir. Both the initial model and the 3D printed version.

The shadows are very interesting. Seems like there must be light coming from at least 2 directions.

But, I really like the model and the textures. I wish I had the skills to draw something like this.

@tuna1957 Very well done sir.

I need to go watch more of Box’s video and learn how to do something like this.

@tuna1957 said in I’ve Been “Boxed”:

@ntxdave Dave, Box posted a link in his last post. Smash and it’ll get you there.

I did look at his link (I do not have Facebook) and I really did not find what I was looking for in the other link. However, I went to the Sketchup Tutorials and looked at one of the links there and finally found what I was looking for. Now I am trying to learn some things again. I really appreciate the help I am getting.

Although I used SketchUp for several years, I have been away for several months and am having to learn some things all over again. I guess that is what happens as we age (I have to look back to see 80).

@Box
I do not have Facebook so I need to find your gif's so I can start learning again. I am feeling really stupid.

@tuna1957
OK, thanks again for the reply. I will have to go back and try to figure some things out. Might take multiple videos though.