Simple Artisan examples collection
-
@hieru said:
It was certainly a worthwhile exercise as I learnt that n-gons in your proxy can be used to create better topology (see the areas highlighted in red).
Don't you mean lack of n-gons? Those highlighted red are quads.
-
Yes you're right - doh! The proxy modelling and end result make much more sense now.
Normally I'd triangulate odd shaped quads in the same way I'd deal with n-gons. Now I know better.
-
haha yeah, i was confused for a minute! I couldn't understand how n-gons can make anything better.
It doesn't matter how "odd" the quad looks. If it's a quad it's a quad and will perform well. Sometimes you can't avoid triangles. It's too many poles that frustrate me.
-
@olishea said:
It doesn't matter how "odd" the quad looks. If it's a quad it's a quad and will perform well.
Lesson learned
I'll certainly never model proxy circular planes any other way from now on. If this shape is typical, there should be a lot to be learnt from the rest of the examples.
-
Had some time to tackle one of the shapes from the topology reference guide. I've changed some of the modelling to make it easier/faster to achieve in Sketchup.
It was certainly a worthwhile exercise as I learnt that n-gons in your proxy can be used to create better topology (see the areas highlighted in red).
Edit: The red areas are quads rather than n-gons. They are however still very important when it comes to creating better topology.
-
-
Very nice work.
Just a quick note: Try using circles with 6 edges instead of 8. When you intersect a 6 sided circle in half with a line you get two halves of quads, if that makes sense. It doesn't really matter for this model, it's just something I should point out. You would end up with less poly too. The starting circle really determines how successful the subdivision is going to be; if you've tried using a strange amount of edges it becomes difficult to keep quads and the model becomes frustrating.
-
Can you do something about the marked areas? Looks a bit strange to me having those stray edges, even though it does form a quad. The large triangles could possibly be avoided too, don't have time to look though.
-
I was simply copying one of the provided examples, but I'll see if there is a better way of doing it.
-
-
@olishea said:
Try using circles with 6 edges instead of 8. When you intersect a 6 sided circle in half with a line you get two halves of quads, if that makes sense.
Good point....that's a great tip
-
@olishea said:
Can you do something about the marked areas?
Is this any better? It generates much neater topology but the poly count goes up.
-
Or how about this? Here I've rebuilt the form using 6-sided openings...much more economical!
-
Two versions of a simple cylinder with a bevelled edge. The second version (bottom) is for situations where you can't get away with a 6-sided shape.
-
Too many poles. 3 and 5 sided converging quads.
-
Last one for today: joining two pipes of the same diameter.
This one is significantly different to the reference as I couldn't figure out how to join the pipes without distorting the bottom pipe and making it non-cylindrical (see circled area).
-
@rich o brien said:
Too many poles. 3 and 5 sided converging quads.
Presumably that makes it difficult for UV mapping?
Edit: I was obviously over-thinking things again...
-
Yeah you nailed it with CylinderWithHoles-V3. Sometimes you think there is no other possible way of doing it....then you come back to the model and think Ohhhhhh! Great examples and thanks for posting here!
Your pipe is better than the example. The area you circled is an N-gon.
I guess the reason they did that was to reduce the "pinch" of the pole that you have in your model. They should have used another loop though. I love subdivision modelling; so many different outcomes from very subtle changes. 
Would be cool if we had a "circularize" plugin for sketchup, you could click on specific rectangles and convert them into squares. Or maybe create an offset square face within the rectangle. Would be nice to be able to specify how many edges so you could even offset a triangle, square, pentagon etc etc....
This would help creating circular holes in peculiar shapes. I use this tool in Wings 3D quite often, maybe I'll ask TIG about it....maybe call it Offset Circle where you can choose the amount of edges the offset circle has.
-
@olishea said:
Yeah you nailed it with CylinderWithHoles-V3. Sometimes you think there is no other possible way of doing it....then you come back to the model and think Ohhhhhh! Great examples and thanks for posting here!
Thanks
@olishea said:
Would be cool if we had a "circularize" plugin for sketchup, you could click on specific rectangles and convert them into squares. Or maybe create an offset square face within the rectangle. Would be nice to be able to specify how many edges so you could even offset a triangle, square, pentagon etc etc....
This would help creating circular holes in peculiar shapes. I use this tool in Wings 3D quite often, maybe I'll ask TIG about it....maybe call it Offset Circle where you can choose the amount of edges the offset circle has.
+1 Definitely sounds like something that would come in handy.
-
David and Oli, fascinating as this is, I think you might be going a bit off-topic, as in "Simple Artisan examples".
If this were to be hived off to a separate thread, you would find many lurkers and contributors I reckon, but I find it a bit complicated for my poor brain.What about a new thread called... "Extremely bloody complicated Artisan examples with lots of esoteric technical terms"
Sorry
Advertisement