The "Duh!" thread (aka the Doh! thread)
-
100001 11000 1110 100011 1100 10001 100100 11110 -
@unknownuser said:
Found a cool one today.
Copy a line over and type 6" to set the distance. Then type *10 to array it 10 times.
What I already knew was that you can type *8 or *4 or whatever to adjust the number of arrayed items.
However I just found out that if you type 3" or 10" it will keep your array but adjust the spacing. Pretty sweet!
-Brodie
Duh!
That is sweet!
The manual doesn't even mention this!
http://support.google.com/sketchup/bin/answer.py?hl=en&answer=94863 -
It even works with circular arrays - just type in the angle in degrees
-
Found a cool one today.
Copy a line over and type 6" to set the distance. Then type *10 to array it 10 times.
What I already knew was that you can type *8 or *4 or whatever to adjust the number of arrayed items.
However I just found out that if you then type 3" or 10" it will keep your array but adjust the spacing. Pretty sweet!
-Brodie
-
@unknownuser said:
Found a cool one today.
Copy a line over and type 6" to set the distance. Then type *10 to array it 10 times.
What I already knew was that you can type *8 or *4 or whatever to adjust the number of arrayed items.
However I just found out that if you then type 3" or 10" it will keep your array but adjust the spacing. Pretty sweet!
-Brodie
This, sir, just made my day!
-
+1
-
@unknownuser said:
Found a cool one today.
Copy a line over and type 6" to set the distance. Then type *10 to array it 10 times.
What I already knew was that you can type *8 or *4 or whatever to adjust the number of arrayed items.
However I just found out that if you then type 3" or 10" it will keep your array but adjust the spacing. Pretty sweet!
-Brodie
I just wish you found this last week, when I needed it.
-
@unknownuser said:
Found a cool one today.
Copy a line over and type 6" to set the distance. Then type *10 to array it 10 times.
What I already knew was that you can type *8 or *4 or whatever to adjust the number of arrayed items.
However I just found out that if you then type 3" or 10" it will keep your array but adjust the spacing. Pretty sweet!
-Brodie
I learned that just a couple months ago from Dave R at a local meetup
-
Shift + Eraser to smooth...
I know that this has always been there, but I just discovered it recently (Duh!) thanks to another thread here... I cannot tell you how many times I have tweaked, and redone a push/pull or follow me command just to minimize the number of lines on a solid!
Ah... feels good to share my stupidity!
-
Ctrl+ eraser is to smooth. Shift+eraser is to hide.
-
-
Ctrl+Erase = Soft+Smooth
Shift+Erase = Hide
Ctrl+Shift+Erase = Un-soft+Smooth (But not Unhide!) -
@thomthom said:
Ctrl+Erase = Soft+Smooth
Shift+Erase = Hide
Ctrl+Shift+Erase = Un-soft+Smooth (But not Unhide!)
Use 'Entity Info' to manipulate selected edges' hidden/soft/smooth status OR alternatively use the context-menu 'Unhide' [or 'Hide']... -
@tig said:
@thomthom said:
Ctrl+Erase = Soft+Smooth
Shift+Erase = Hide
Ctrl+Shift+Erase = Un-soft+Smooth (But not Unhide!)
Use 'Entity Info' to manipulate selected edges' hidden/soft/smooth status OR alternatively use the context-menu 'Unhide' [or 'Hide']..."Learn something new everyday!"
In this case... several new things.
-
@unknownuser said:
However I just found out that if you type 3" or 10" it will keep your array but adjust the spacing. Pretty sweet!
-Brodie
Duh!
That is sweet!
The manual doesn't even mention this!
http://support.google.com/sketchup/bin/answer.py?hl=en&answer=94863Seems that is more missing here
http://support.google.com/sketchup/bin/answer.py?hl=en&answer=94867&topic=2458142&ctx=topic -
@heaps said:
It even works with circular arrays - just type in the angle in degrees
You've lost me now...I usually type in x(number) not *(number). But how do I get back to degrees... how does one type 'degrees'! ACAD is 'dd%d' but what is SU?
-
Typing an 'x' or '*' is the same - so you can type x2, *2 , 2x etc for 'times'.
To 'divide' the copies use /2...
You never need to use a 'degree' symbol with Rotate, any typed in +ve or -ve numbers that don't contain an x, * or / are taken as degrees anyway... In Move [and tools like Line] it's taken as 'current units', unless you add a units suffix, so typing 1000 while using mm Moves the object 1000mm, but to move it a specific distance in feet+inches can be done even while the model's current-units is mm - e.g. typing 3'4" will Move that exact amount [1016mm] etc...Incidentally, if you want to type 'special characters' in Sketchup Text - like degrees [°] - there are OS specific key-strokes, on a PC it's Alt0176, on a MAC I think it's OptionShift8. There are lots, so if you use some regularly have a crib sheet handy...
-
This is also a question, based on the above.
Using SCALE, you can just type a percentage value in the VCB. This is handy to set a specific scale factor like 92%. It is also handy to set a scale factor that is between SCALE's preset snap tolerance of .1% so just type 90.15 in the VCB where SCALE snaps only to 90.1% or 90.2% and you need the precision.
OK, my question, How do I set scale to a dimensional value?
ie: my object is 12 inches, and I want it to be 13 inches, without doing the percentage math. AND I am holding the CTRL and SHIFT keys down to scale all and from the center. When I release the mouse button to type, my position is lost. -
@jgb said:
OK, my question, How do I set scale to a dimensional value?
ie: my object is 12 inches, and I want it to be 13 inches, without doing the percentage math. AND I am holding the CTRL and SHIFT keys down to scale all and from the center. When I release the mouse button to type, my position is lost.Just scale roughly first - then use the VCB to adjust with accuracy afterwards - typing in the length.
-
Just draw a 13 inch segment from a vertex from your object and Scale your object by the line!
Alas this just work only with "cubic" objects!
If you have inclined faces you must don't use the native Scale tool!!!
Advertisement