SimLab have a plugin that exports to PDF

Change the camera: http://code.google.com/apis/sketchup/docs/ourdoc/camera.html#set

Hey Tig, Thx for the answer. Why i am not using teh animation exporter is because it skips page observers. Since changing from one page to another invokes a function in my model i cannot use it. That's why i'm looking for an alternative to create movies. You think it's possible that adding the compression an transparent factor solves the issue? Cause i have also tried it with images generated by Export-->2D graphic and that had the same error. Thx!

The answer from Stack Overflow is: <span class="syntaxhtml">d&nbsp;=&nbsp;<span class="syntaxdefault"><?php&nbsp;</span><span class="syntaxkeyword">echo&nbsp;</span><span class="syntaxdefault">json_encode</span><span class="syntaxkeyword">(</span><span class="syntaxdefault">$target_path</span><span class="syntaxkeyword">);&nbsp;</span><span class="syntaxdefault">?></span>;</span> They pointed out this is only useful if you are working with localhost.

really helpful!!! thanks a lot

Hi, morci429: Perhaps this recent development from honoluludesktop? http://forums.sketchucation.com/viewtopic.php?t=32088#p283327

@honoluludesktop said: Someone previously showed me that it works this way. chosen_file=UI.openpanel("Select DXF File","", "*.Dxf") And also like: chosen_file=UI.openpanel("Select DXF File","*.Dxf") However... Windows will use it's own directory paths it automatically saves into the Registry, for each file extension. (1) If the openpanel has never before selected a *.dxf file, then the openpanel will (likely) open in the user's My Documents folder. (2) If the User did previously select a *.dxf file, with the openpanel, Windows will open in the Most Recently Used (MRU) path Windows saved for the *.dxf extention. Setting the working directory via Dir.chdir has no effect on what directory the openpanel starts in.

@tig said: tr=group.transformation to that point pt.transform!(tr) Thank you very much for the tip !

This might be clearer ruby: x="E;/new_batch.cmd" UI.openURL(x) returns true batch file: @echo off echo "Hello World" echo pause exit Waits for you to close it... x="file:/E:/new_batch.cmd" will also work... Writing the bat or cmd file to the root directory would probably be better if it were into a Temp folder ?

@borg.stef said: ... and it gives me this error: #<NoMethodError: undefined methodpoint3d' for Geom:Module>` Because methods begin with lower case identifiers. Class (and Module,) indentifiers are titlecase. @borg.stef said: How can i put a simple model in the required location? I did the following coding: model = Sketchup.active_model pt = Geom::point3d.new(0,0,0) tr = Geom::Transformation.new(pt) model.transform!(tr) The model origin is already at [0,0,0], and there is a constant ORIGIN for it. So your code above does nothing.

I have reported the weirdness to the powers that be at Google - it is certainly reproducible although I had never seen it before... Meanwhile the temp fix 'Triangulate Faces' is here http://forums.sketchucation.com/viewtopic.php?p=175613#p175613 for the rest of you...

Check his updates at the end of the article also.

@larsen said: Please, is this api diagram correct? NO (you should remove it.) Thanks for taking it down Larsen There are links to the available diagrams: SketchUp Ruby API - Class Diagram http://code.google.com/apis/sketchup/docs/diagram.html Sketchup Ruby API Class Diagrams by Jim Foltz http://sketchuptips.blogspot.com/2008/08/sketchup-ruby-api-class-diagrams.html

@tig said: Have you tried tr=container.transformation.inverse and applying it to the initial object and then iterating and getting/setting the transformation for the container's container etc until you get to the model level... That didn't seem to work (inverse), though I may very well have misunderstood what you meant, but what you said gave me an answer anyway. By applying the transform to the points at each container successively, it works perfectly! (or at least in every test so far) Which is how I should have tried it initially but I was thinking from a performance standpoint, and forgot the old adage "premature optimization is the root of all evil" def WALK.GetParent(ent) Sketchup.active_model.start_operation("Walk") model = Sketchup.active_model @newg = model.entities.add_group m = model.materials.add "test" m.color="red" orig = ent tpos = Geom;;Point3d.new 0,0,0 # keep track of origin trans = Geom;;Transformation.new(Geom;;Point3d.new(0,0,0)) # add transforms to this vertices = orig.outer_loop.vertices.map {|v| v.position.clone} while (ent.respond_to?('parent') ) # walk up hierarchy if ((ent.is_a? Sketchup;;ComponentDefinition)) if ent.group? t = ent.instances[0].transformation # Get the group's transform vertices.each_with_index do |v,i| vertices[i].transform! t end end ent = ent.instances[0] # become the instance end ent = ent.parent end f = @newg.entities.add_face vertices # create the face f.material=m Sketchup.active_model.commit_operation end Thanks again for the help!

Anyone has any suggestions?

You CAN sort of fudge it... make a separate SKP file containing a dimension 1" long and 1" offset. Then in code load it as a component into your SKP. Add an instance at a point and scale it in the X to match the length to another point and in the Y for the offset needed. You also need to transform-rotate it so that it aligns with the vector of the two points etc... When done you can explode the dim-component instance back into a plain dimension. An dims added this way will ever be linked to an edge or vertex as in a manually added one... You could perhaps include a 1" long edge in the dim-component that the dim refers to... and if that then replaced the original line below it when exploded it might keep some linking ? It's better than nothing... but only just...

There is no 'name=' option for dictionaries - you have to clone the whole thing with a new name and delete the original. The core-code magically prevents the specific dictionary name [GSU_ContributorsInfo] from being 'made' or edited by the standard users [although we have seen that 'deleting' it is possible - but I'd think that's probably an oversight by Google] - BUT of course it IS editable somehow... because Google can do it !

@kdasilva said: I appreciate all your help, but I am still unsure on why my get get_attribute method would return nil in a different call back? is there a scope issue I am not accounting for? the get_attribute works within the same callback so I am lead to believe that the instance name is working as a key... Did you check that the 'key' was acceptable ? You were setting the attribute for the model etc ? Rather that try an do it directly in the call_back make a method and run it with self.callback1() etc... What you are trying to do is relatively straightforward ... just break it into logical steps......

@gulcanocali said: @thomthom said: Don't think you can create zero length edges via Ruby. model.active_entities.add_line( ORIGIN, ORIGIN ) <- returns nil The first step in my note should have been "move the vertex on top of the other vertex you want to merge with" (then there may be an edge with zero length). After that follow the next two steps. That seem to have worked. Though temp groups and edges feels a big hacky - I wonder if there's a cleaner way. Would be interesting to get some insight to how SU does this internally. But thank you very much for this working method!

@dan rathbun said: I think there is a whole topic on this concerning "Javascript:void(0);" vs "Javascript:return;" one of which needs to be in the HREF tag, the Ruby callback needs to be in the onClick call. To avoid triggering an A HREF link, and instead execute some other JS code, you return false to the onclick event.