@jgb said:
L I Am
I can't install 2017. 2016 is as high as I can go. My system is 32 bit and 2017 and later are 64 bit.
Actually my hardware is all 64 bit but long ago I inadvertently installed Win 10 32 bit and now I am stuck with it.
If your C drive failed and you're reinstalling, then rather go for the 64-bit version? I have not come across any 32-bit software (that I use) that would not run on Win 10 64-bit.
@derei said:
Is this plugin still being maintained? For some reason it doesn't add separators anymore.
Latest version on EW is 1.1.8
@jgb said:
I had to install a new 480gb SSD when my old 128gb SSD crashed.
It is fully readable but not bootable. I have both SSD mounted, 480 is
128 id E:.
I reinstalled SU 2015 on
Which directories/files on the old SSD do I need to copy over to regain my toolbars, add-ons, materials, etc?
Rather do a fresh install of everything, copying things over will not work for some things, may work for a few extensions, but overall it's a bad idea, more pain than the shortcut is worth.
@hornoxx said:
@majid866 said:
...MAJ Rail Version 0.0.2 is published. Please let me know your idea about it.
Thanks for this plugin idea and Info- where is it? I cant find it here in https://sketchucation.com/pluginstore
Extension Warehouse.
@tonyau said:
Hi All,
This is one I did a few months ago, I have used the plug-in on a few projects, and after some adjustments to my workflow find the plug-in a really useful tool..The animation highlights a construction method for scaffolding a circular Tank.
All animations were done with sketch-up & Animator, and put together in premier pro.
Apart from the end, the photo-real stuff was enscape..!Cheers.
Tony
9Design
Good job! Would have been cool to see the Health and Safety signage (safe for use) up as well.
@pibuz said:
Or, is there a newer plugin making the same thing (dashed projections of sections)?
IIRC Rich Section went on to become SKALP.
@chasegrisby56 said:
hey!
I just wanted to say that I recently started using your program and I really like it! i am making some progress
I hope to find many useful tips and tricks on the forum!
Welcome to the forum! There is lots to learn here, I hope you'll get as much from it as I (and many, many others) have over the years. A quick side note, SketchUp is owned by Trimble and this forum has no affiliation to them.
Draw the cylinder in an unfolded fashion, draw the holes and array copy as desired, the use the extension "Flowify" to turn it into a cylinder.
@juju said:
I'm on SU2021Pro (version 21.0.391), Win10 and am having some strange behaviour from Layer Manager (version 3.1.0) recently. Somehow it isn't reading my custom layer structure (.lml) file. I've used the custom layer file without any trouble in SU2020Pro (and earlier) with Layer Manager (version 3.1.0). As a side note, I've also extracted frequently used button, New Layer (create layers from file), with Toolbar Editor (version 1.1.8) and have reverted that as well to check if this had anything to do with the problem, but it doesn't seem that way, still had problems with function.
Anyone else also having trouble with the extension lately?
Any ideas?
Hmmm, it seems to be working as expected again. The only change I made was shortening the custom layer structure (.lml) file name by 5 characters (a space and 4 numeral). Go figure.
I'm on SU2021Pro (version 21.0.391), Win10 and am having some strange behaviour from Layer Manager (version 3.1.0) recently. Somehow it isn't reading my custom layer structure (.lml) file. I've used the custom layer file without any trouble in SU2020Pro (and earlier) with Layer Manager (version 3.1.0). As a side note, I've also extracted frequently used button, New Layer (create layers from file), with Toolbar Editor (version 1.1.8) and have reverted that as well to check if this had anything to do with the problem, but it doesn't seem that way, still had problems with function.
Anyone else also having trouble with the extension lately?
Any ideas?
Your model is below the Z=0 position, that is the level those shadows are showing up at. Select all and move it up on the Z-axis.
@fredo6 said:
NEW RELEASE: FredoSpline v2.0a - 24 Jan 21
Requirements
- LibFredo6: v11.6a
- Sketchup version: SU2017 and above
FredoSpline v2.0a becomes a paid plugin.
There is a Free trial period of 15 days from activation, with full features. Then, you need to license the extension on Sketchucation:
- Perpetual License: 22 €
- Rush License (21 days from purchase date): 7 €
See this post for instructions to license an extension on Sketchucation.Note: the previous version v1.7a will naturally expires on 31 Jan 21
Home Page of FredoSpline for information and Download.
Aah, great to see you're finally taking the step into commercializing your extensions and getting something in return for your efforts!
@tig said:
ThruPaint is not a separate tool, it's part of his FredoTools
https://sketchucation.com/plugin/907-fredotoolsAre you trying to download it from the PluginStore or elsewhere ?
https://sketchucation.com/pluginstore?pln=FredoTools
As it happens I noticed that it is listed as a separate extension on EW. Listing page reverts back here to SketchUcation though.
Aaah, yes, what would be great is if these referenced documents / notes / whatever could be invoked with the text labels function in both SketchUp and LayOut!
@alpro said:
https://forums.sketchup.com/t/importing-shapefiles-shp-to-sketchup-skp/59032
The links to the extension are all dead. 
@aiden900 said:
hello, Well i've tried almost everything to fix, all other extensions work. but this is the only extension that's not working at all, it's not appearing in the tools bar neither in the extensions options, i am attaching screenshot just to show you that i have installed the latest version as you linked above.
It is not an extension in itself. It is a library required by Fredo's extensions.
Unfortunately since SketchUp 2021 is out, you will no longer be able to get a license to SU 2020. Keep in mind it is also subscription now, so you're going to keep on paying for the latest version of Sketchup every year. Stop paying and you lose access to your SketchUp work.
Your files from SU2015 will open and work just fine in the latest version of Sketchup. You will have to update your plugins / extensions to ones that are compatible with the latest version of SU.
Interesting methodology. Depending on time I might give it a try. Any chance you could get it to work that you select the line drawing and have it extrude the stairs from that? Obviously there will be another click or two involved to indicate start and end.
Do you perhaps have video tutorial? The EW page mentions 4 different kinds of stairs but 2 of those look very much the same (apart from structure thickness).