[Plugin] FredoBend - v1.2l - 10 Apr 26

AISmebel

@panixia said:

Нет.
Должно быть soft = true; smooth = true И cast shadows = false, иначе это не сработает.

I was sure that I was not giving complete information, but I wrote that I knew)) I think Fredo knows exactly what it's about and how it should be. But still, thanks for the correction, maybe this way we will get the desired result faster)

AISmebel

@panixia said:

Я планировал поделиться с вами кодом в любом случае (для проверки перед публикацией на Sketchucation), думаю, было бы интересно, если бы вы интегрировали (и, возможно, улучшили) его в некоторые из ваших плагинов, этот может стать подходящим вариантом.

I would like to ask you to share this interesting plugin. I created a lot of interesting things myself with the help of Claude. It's interesting to see what others are doing.

fredo6

With FredoBend v1.2b, you can normally keep the quad properties by turning off:

Slicing
remove coplanar edge
soften edges

Here is a video showing the process.

FredoBends - Quads.mp4

Here is the test file. Tell me if this is OK.

test quads 2.skp

fredo6

@AISmebel said:

I also want to suggest that after using the plug-in, the components do not deform, bend in shape and retain their component properties

I don't understand what you mean.

The component / group property is kept. If you bend a component. the output is a component. Same for subcomponents.

However, all the content of the container is made unique, because bending is not a transformation but a creation of geometry. This has nothing to do with slicing.

panixia

@fredo6 said:

I also want to suggest that after using the plug-in, the components do not deform, bend in shape and retain their component properties

I don't understand what you mean.

Wow, I realize that I didn't understand correctly the proposal, so I retreat my + 20 on this.
Because you basically can't do that in Sketchup (you'd need some sort of modifier system similar to the 3dsMax one to accomplish this).
I understood that he was talking about a non-slicing behavior instead (which would be preferable).

panixia

@AISmebel said:

I would like to ask you to share this interesting plugin. I created a lot of interesting things myself with the help of Claude. It's interesting to see what others are doing.

It's currently in the last (I hope so) alpha stage, I'll need to fix a couple of edge cases before it can go beta.

AISmebel

@fredo6 said:

Вот тестовый файл. Скажите, пожалуйста, всё ли в порядке.

тестовые квадрокоптеры 2.skp

2.mp4

AISmebel

@fredo6 said:

Я не понимаю, что вы имеете в виду.

Свойство компонента/группы сохраняется. Если вы изгибаете компонент, на выходе получается компонент. То же самое относится и к подкомпонентам.

Однако всё содержимое контейнера уникально, поскольку изгибание — это не трансформация, а создание геометрии. Это не имеет ничего общего с разрезанием.

Perhaps I did not state my thought correctly, perhaps I got confused in the terms, or perhaps my translator did not translate it correctly) I want to say the following: when we use a plugin, is it possible not to deform the component so that the component does not lose its connection with its own kind? As an example in the video, I used the Copy Along Curve plugin. He arranged the components in an arc without deforming or making the components unique.

3.mp4

fredo6

Plugins like Copy Along Curve just move and rotate the objects to position them along the curve. So, this is not really bending and it is another use case.

For FredoBend, it is possible to add an option where only the top container is modified, leaving the sub-container not deformed.

alexpacio2013

It doesn't work for me. With my sketchup 2025 full of plugins, it doesn't work. In practice, if I place the object on a line or a curve, it doesn't get curved. While if I install it on sketchup 2026 with very few plugins, it works. There are some incompatibilities, but it doesn't give me any errors. Anyway, congratulations, it's fantastic.
[link text](Here is a video In the first case it is that if up 2025 and in the second scatchup 2026
https://community.sketchucation.com/post/1620017)

Rich O Brien

@alexpacio2013 said:

It doesn't work for me

If there are errors in the Ruby Console you should post those to help Fredo determine the cause.

I presume you have an updated LibFredo installed.

alexpacio2013

@Rich-O-Brien Latest version of FredoBend 1.2b and FredoLib 15.9a. Everything is up to date.
Ruby console
[#Sketchup::ComponentInstance:0x0000018ac36785f0]
[#Sketchup::Group:0x0000018aca8649c0]
[#Sketchup::Group:0x0000018aca8649c0]
[#Sketchup::Group:0x0000018aca8649c0]
#<NameError: uninitialized constant Array::Fixnum>
C:/Users/roberto.bolletta/AppData/Roaming/SketchUp/SketchUp 2025/SketchUp/Plugins/mx_constructtools/mx_constructtools.rb:12:in block in sum' C:/Users/roberto.bolletta/AppData/Roaming/SketchUp/SketchUp 2025/SketchUp/Plugins/mx_constructtools/mx_constructtools.rb:11:in upto'
C:/Users/roberto.bolletta/AppData/Roaming/SketchUp/SketchUp 2025/SketchUp/Plugins/mx_constructtools/mx_constructtools.rb:11:in sum' c:/users/roberto.bolletta/appdata/roaming/sketchup/sketchup 2025/sketchup/plugins/fredo6_fredobend/fredobendcurvetool.rbe:1792:in courbe_register'
c:/users/roberto.bolletta/appdata/roaming/sketchup/sketchup 2025/sketchup/plugins/fredo6_fredobend/fredobendcurvetool.rbe:1693:in placement_manage' c:/users/roberto.bolletta/appdata/roaming/sketchup/sketchup 2025/sketchup/plugins/fredo6_fredobend/fredobendcurvetool.rbe:1667:in placement_dragging_move'
c:/users/roberto.bolletta/appdata/roaming/sketchup/sketchup 2025/sketchup/plugins/fredo6_fredobend/fredobendcurvetool.rbe:424:in onMouseMove' #<NameError: uninitialized constant Array::Fixnum> C:/Users/roberto.bolletta/AppData/Roaming/SketchUp/SketchUp 2025/SketchUp/Plugins/mx_constructtools/mx_constructtools.rb:12:in block in sum'
C:/Users/roberto.bolletta/AppData/Roaming/SketchUp/SketchUp 2025/SketchUp/Plugins/mx_constructtools/mx_constructtools.rb:11:in upto' C:/Users/roberto.bolletta/AppData/Roaming/SketchUp/SketchUp 2025/SketchUp/Plugins/mx_constructtools/mx_constructtools.rb:11:in sum'
c:/users/roberto.bolletta/appdata/roaming/sketchup/sketchup 2025/sketchup/plugins/fredo6_fredobend/fredobendcurvetool.rbe:1792:in courbe_register' c:/users/roberto.bolletta/appdata/roaming/sketchup/sketchup 2025/sketchup/plugins/fredo6_fredobend/fredobendcurvetool.rbe:1693:in placement_manage'
c:/users/roberto.bolletta/appdata/roaming/sketchup/sketchup 2025/sketchup/plugins/fredo6_fredobend/fredobendcurvetool.rbe:1667:in placement_dragging_move' c:/users/roberto.bolletta/appdata/roaming/sketchup/sketchup 2025/sketchup/plugins/fredo6_fredobend/fredobendcurvetool.rbe:424:in onMouseMove'

rv1974

Looks great Fredo. This is destructive one, isn't it? No way to edit afterwards

AISmebel

@fredo6 said:

Для FredoBend можно добавить опцию, при которой изменяется только верхний контейнер , а подконтейнер остается недеформированным.

I think that's what you need. At least it would be great to experience it. Thank you.

fredo6

@alexpacio2013 said:

mx_constructtools

It looks like the plugin mx_constructtools is redefining a base method (Array#sum), which is not a good practice and is dangerous for other plugins. This is causing the error.

fredo6

@rv1974 said:

Looks great Fredo. This is destructive one, isn't it? No way to edit afterwards

The bent object is of course new geometry.

However, as shown in the main video:

the original object is untouched
If you modify this original object, you can update the bent object in one click.
you can also edit the bent object and change the bending parameters. If the original object has been modified, the new bent object will be updated.
there is an option to save a copy of the original object to an external file. This is for the case where you delete the original object in the model, including its definition.

chon · SU2019 pro 19.3.253 + VRay 4.00.02 (Next) on Win10-64Bits

Hi all,
running FredoBend v1.2b with LibFredo v15.9a on SU 2019 / Win11 and i've got an issue on the bend generation step with this error log :

"Date: 27-Mar-26 09:24:41 - SU2019.3 - LibFredo6 - v15.9a
Une erreur s'est produite dans
Error in Bend Generation

undefined method `save_copy' for #<Sketchup::ComponentDefinition:0x0000023c3844c1d8>

fredobendcurvetool.rbe: 1195 -- saver_solid_comp
fredobendcurvetool.rbe: 2425 -- generation_step_prepare
fredobendcurvetool.rbe: 3270 -- job_perform
fredobendcurvetool.rbe: 3212 -- job_notification
body_lib6webprogress.rbe: 104 -- call
body_lib6webprogress.rbe: 104 -- process_notify
body_lib6webprogress.rbe: 388 -- fast_process_next_step
body_lib6webprogress.rbe: 358 -- fast_process_start
body_lib6webprogress.rbe: 370 -- fast_process_next
body_lib6webprogress.rbe: 346 -- fast_process_top
body_lib6webprogress.rbe: 123 -- invoke
fredobendcurvetool.rbe: 3158 -- job_start
fredobendcurvetool.rbe: 2392 -- block in generation_launch"

In the Parameters window / Generation parameters, i don't see the build options as shown in the tuto :

Is that the problem ?

Thanks for response

fredo6

NEW RELEASE: FredoBend v1.2c - 27 Mar 26

Requirements

LibFredo6: v15.9a or above
Sketchup version: SU2017 and above

FredoBend 1.2c is a maintenance release including:

Bug fixing
Evolution of the Save Original objects with 3 options and the capability to retrive the original object, even if it is not present in the model any longer.

Home Page of FredoBend for information and Download.

Main post of this FredoBend thread.

Spirou4D

@fredo6
I just installed FredoBend v1.2c + LibFredo6 15.9a - 25 Mar 26 on my SketchUp Make 2017 v 17.2.2555 64bits .
I have the tools but after I choose my Text object and place to the courve....NOTHING !

Impossible to place on the curve ???
Traceback Rubby:

c:/users/patrick/appdata/roaming/sketchup/sketchup 2017/sketchup/plugins/fredo6_fredobend/fredobendcurvetool.rbe:1656:in `placement_manage'
c:/users/patrick/appdata/roaming/sketchup/sketchup 2017/sketchup/plugins/fredo6_fredobend/fredobendcurvetool.rbe:1618:in `placement_dragging_move'
c:/users/patrick/appdata/roaming/sketchup/sketchup 2017/sketchup/plugins/fredo6_fredobend/fredobendcurvetool.rbe:421:in `onMouseMove'
Error: #<NoMethodError: undefined method `sum' for #<Array:0x0002627992fa30>>

Spirou4D

Hi @fredo6
I just ended the french translation of the LibFredo6 15.9a messages.
And FredoBend v1.2c too.
How to send you the result "LibFredo6_FR.lang" + "FredoBend_FR.lang" please?