[Plugin][$] FredoCorner - v2.7a - 31 Mar 24
-
@cskovago said:
Hi,
I have just updated to the latest version, because the plugin refused to work as the 1.6 version. Now, it is NON-WORKING order, I can not even copy the bug report (because the cursor turns semi-transparent on the bug-report tab), I can select the faces, edges, I can set the parameters, the plugin calculates the edges, but when I let it done the task, nothing happens, just the bug-report tab is red...
Any idea or help, please?
Win7, SketchUp 2017 latest
In this kind of situation, it would be helpful to attach the model. Otherwise, this is difficult to find out.
If you have the red notification, then there is an error. So, open the Ruby console before launching FredoCorner and check if there are errors displayed. That would also help.
-
Thank you so much for this plugin and the previous version.
I was using it today and got this odd geometry, it only happened on this side, the other side of this box laid out correctly. I realize it would run into the hole in the geometry but I was surprised at what it was doing and that it wasn't doing the same thing on both sides.Ron
-
@ronagoldberg said:
I was using it today and got this odd geometry, it only happened on this side, the other side of this box laid out correctly. I realize it would run into the hole in the geometry but I was surprised at what it was doing and that it wasn't doing the same thing on both sides.
Strange! Could you post the model so that I have a close look.
Fredo
-
NEW RELEASE: FredoCorner v1.6c - 20 Jun 19
Requirement: LibFredo6 8.8a
FredoCorner 1.6c extends validity.
Please note that, in the current version of FredoCorner:
- there are issues with some shortcut modifiers (Ctrl, Alt) on Mac)
- there are known issues and bugs here and there. This concerns in particular Collisions, i.e. when the offset is too large.
- Terminal corners (that is ending on a single edge) may present issues and bugs
- No documentation yet, so watch the videos that I will publish.
Please report issues, questions and any feedback in the present thread
Home Page of FredoCorner for information and Download.
-
Hi, Fredo corner stopped working. It says "no good edges at face"or "NO match of edge properties) even with a new drawing and a simple box.
I have reinstalled Fredo Corner v 1.6c and LibFredo6 ver 9.0A and have rebooted my computer. Still same problem.
I´m using Sketchup 8 Pro on Mac OSX Mojave (10.14.5).
Any tips?Mattias
-
@mwh said:
I´m using Sketchup 8 Pro on Mac OSX Mojave (10.14.5).
Your profile indicates you are using SketchUp 2018. Which one is correct?
-
@mwh said:
Hi, Fredo corner stopped working. It says "no good edges at face"or "NO match of edge properties) even with a new drawing and a simple box.
I have reinstalled Fredo Corner v 1.6c and LibFredo6 ver 9.0A and have rebooted my computer. Still same problem.This may simply be normal. You have a filter to select edges
Depending on the filter and what you select, FredoCorner may find that there is no effective edges.
So make sure that the edges you select and the filter do match.
Fredo
-
Thanks Fredo:)
It was that simple. Unbelievable that I missed that.
Dave R, you're right. I'm using 2018.Thanks again!
M -
Hi Fredo Round Corner have some errors
this is a corner with 8 segments and 1mm radius
skp 2019
https://1drv.ms/u/s!AoU3tpJxqmvto3skG47ckoAVXMeP?e=nu42nxskp2013
https://1drv.ms/u/s!AoU3tpJxqmvto3z6vD80Gvsyv0Vc?e=eIjFlT
-
Looking at the various errors you've posted recently, I assume that it's more a limitation of SU rather than a bug in the various plugins...
What usually helps is if you scale the model up - i.e. 10 times so one millimetre becomes one centimetre...
And once the plugins have made the job for you, you scale it down to the original size...The detail you seem to want to accomplish is not something SU is good at...
-
I usually make it a component then copy the component and scale it up 10-1000 times and make the tiny stuff on that copy. When done I just delete the copy and the original component is done.
-
NEW RELEASE: FredoCorner v1.7a - 20 Sep 19
Requirement: LibFredo6 9.1b
FredoCorner 1.7a extends validity.
Please note that, in the current version of FredoCorner:
- there are issues with some shortcut modifiers (Ctrl, Alt) on Mac)
- there are known issues and bugs here and there. This concerns in particular Collisions, i.e. when the offset is too large.
- Terminal corners (that is ending on a single edge) may present issues and bugs
- No documentation yet, so watch the videos that I will publish.
Please report issues, questions and any feedback in the present thread
Home Page of FredoCorner for information and Download.
-
I am not able to get this to load in SU 2019...error message every time.
-
@mrkidd said:
error message every time.
What's the error message?
Did you install the current version of LibFredo6 which is required by FredoCorner? See Fredo's post immediately before yours.
-
NEW RELEASE: FredoCorner v1.7b - 02 Nov 19
Requirement: LibFredo6 9.1b
FredoCorner 1.7b for bug fixing.
Please note that, in the current version of FredoCorner:
- there are issues with some shortcut modifiers (Ctrl, Alt) on Mac)
- there are known issues and bugs here and there. This concerns in particular Collisions, i.e. when the offset is too large.
- Terminal corners (that is ending on a single edge) may present issues and bugs
- No documentation yet, so watch the videos that I will publish.
Please report issues, questions and any feedback in the present thread
Home Page of FredoCorner for information and Download.
-
What was the exact error message? Did you also install the required LibFredo6 files?
-
I was excited to use this plugin but after installing and restarting sketchup I got an error message stating there was an error loading, could not find loader file. Help!
Yes, I installed the "lib" file.
Error message:
Error Loading File Fredo6_FredoCorner/__loader__FredoCorner
Could not find included file 'Fredo6_FredoCorner/__loader__FredoCorner' -
NEW RELEASE: FredoCorner v1.7c - 21 Dec 19
Requirement: LibFredo6 9.1b
FredoCorner 1.7c for extenson of validity.
Please note that, in the current version of FredoCorner:
- there are issues with some shortcut modifiers (Ctrl, Alt) on Mac)
- there are known issues and bugs here and there. This concerns in particular Collisions, i.e. when the offset is too large.
- Terminal corners (that is ending on a single edge) may present issues and bugs
- No documentation yet, so watch the videos that I will publish.
Please report issues, questions and any feedback in the present thread
Home Page of FredoCorner for information and Download.
-
Hi Fredo,
I get this message when using bevel (same for Round) when selecting three edges.
Is this tool limit so it just can´t do or I am doing something wrong here?Also,
Thank You very much for all the plugins you have created and made my work easier doing so.
-
This seems to be a limitation of FredoCorner. I can reproduce it on my computer.
The message is not informative, because, when there is a problem in the geometry, FredoCorner assumes that it could come from an offset which is too large. I know where the error happens, but this seems to be an issue in the heart of the algorithm, which is quite complex for this type of geometry. So I put your model in the stack of models I have already for when I'll dig into FredoCorner deep core to see how to make it more robust.
At a first glance, I am scratching my head on what could be the correct result with a selection of only 3 edges at this 6-edge corner, convex / concave.
It works fine however if you select the 6 edges.
Advertisement