[Plugin][$] FredoCorner - v2.7a - 31 Mar 24

newnoob · 3 Jan 2023, 22:30

@dave r said:

You're not being forced to do that. Why not take the easy route and let the ExtensionStore tool update those extensions that need it automatically?

Are you still using an ancient Pre-2013 version of SketchUp as your profile indicates?

I'm using SketchUp 2021, it's been a while since I updated my profile.

At the start I didn't even know that I have and need ExtensionStore tools, only until after I installed fredospline and tried to use it a warning popped and up informing me that I needed to update it.

Well now everything is working again, thanks for listen to my update pain.

Dave R · 3 Jan 2023, 22:53

@newnoob said:

I'm using SketchUp 2021, it's been a while since I updated my profile.

Yes. It most certainly has been a while. Please update it now. That information helps us help you.

@newnoob said:

At the start I didn't even know that I have and need ExtensionStore tools, only until after I installed fredospline and tried to use it a warning popped and up informing me that I needed to update it.

The SCF Extension Store tool has been required from the first point when Fredo's extensions became commercial. Really you should have been using it for years as it makes searching for and installing extensions from Sketchucation so much easier. It also makes it much easier when it comes time to udate to the next version of SketchUp. You can install the SCF tool first and use it to install your bundle of SCF extensions without having to search for them all.

@newnoob said:

Well now everything is working again, thanks for listen to my update pain.

You're welcome.

rv1974 · 7 Jan 2023, 15:23

Hello Fredo,

Is it possible to keep the new offset faces selectedafter the command is finished?
When geometry selected is it possible to filter out the hard edges* and process only edges laying on 'inner' faces?
*- I assume some extra 'angle between faces' parameter would be needed.

Filippidi · 18 Jan 2023, 18:39

Well,
my Fredo Corner plugin has expired and I upgrade it via sketchupucation to the latest version, but it does not work. I also upgrate LibFredo6 to the latest version v13.7a. I tried all the posibble intallation methods but still says that this version of fredo corner has expired. Please upgrade to the latest version.
Can anyone help me please?

Dave R · 18 Jan 2023, 18:59

@filippidi said:

I tried all the posibble intallation methods but still says that this version of fredo corner has expired. Please upgrade to the latest version.
Can anyone help me please?

Have you purchased the license for RoundCorner? Are you still using SketchUp 2016 Pro as indicated in your forum profile?

mamzzou · 19 Jan 2023, 16:15

Hi everyone !

I made all the update needed (i have the latest version of fredo lib6 v13.7a and the latest version of sketchucation tools v4.3.0)
and the pluggin doesn work, i close sketchup many times, i shut down my computer many times and nothing works..
i cannot use the fredo tools joint push pull too...

Can someone help me pleaaaaaaase ?

I checked my license and i have perpetual license so everything's okay...

Rich O Brien · 19 Jan 2023, 16:36

Go to...

Copy text and paste it here

Dave R · 19 Jan 2023, 16:38

@mamzzou said:

I made all the update needed (i have the latest version of fredo lib6 v13.7a and the latest version of sketchucation tools v4.3.0)
and the pluggin doesn work

Are you still using the version of SketchUp listed in your profile?

TIG · 19 Jan 2023, 17:41

If you haven't got a version >=2017 nothing will work !

Dunnys · 25 Jan 2023, 13:18

Hi Fredo...

Great plugin!!! I do have an issue at the moment with a object that I trying to get the corners / edges rounded on. one of the edges causes an ruby error "undefined method `[]' for nil:NilClass" that sound to me like a pointer issue some where, here is the log from ruby.

i'm running SU2021 pro. and have latest version of plugin and fredolib installed. I have attachet screenshot and sketchup model

Again thx. for this great plugin.

Regards
Michael

Date: 25-Jan-23 13:29:08
An error occurred in FredoCorner
An error occured in the Ruby code

undefined method `[]' for nil:NilClass

fredocorneralgo.rbe: 2618 -- chemin_analyze_crossing
fredocorneralgo.rbe: 2421 -- brane_intersect_chemins
fredocorneralgo.rbe: 2060 -- block in catena_process_branes_protected
fredocorneralgo.rbe: 2047 -- each
fredocorneralgo.rbe: 2047 -- catena_process_branes_protected
fredocorneralgo.rbe: 2009 -- block in catena_process_branes
fredocorneralgo.rbe: 2008 -- catch
fredocorneralgo.rbe: 2008 -- catena_process_branes
fredocorneralgo.rbe: 965 -- block in solid_construct_branes
fredocorneralgo.rbe: 964 -- each
fredocorneralgo.rbe: 964 -- solid_construct_branes
fredocorneralgo.rbe: 919 -- block in solid_reconstruction
fredocorneralgo.rbe: 918 -- each
fredocorneralgo.rbe: 918 -- solid_reconstruction
fredocorneralgo.rbe: 883 -- solid_add_remove_edges
fredocornertool.rbe: 1840 -- selection_change
fredocornertool.rbe: 1828 -- selection_add_remove_edges
fredocornertool.rbe: 1851 -- selection_set
fredocornertool.rbe: 1533 -- block in preselection_instantiate
fredocornertool.rbe: 1530 -- each
fredocornertool.rbe: 1530 -- preselection_instantiate
fredocornertool.rbe: 1525 -- preselection_analyze
fredocornertool.rbe: 761 -- true_activate
fredocornertool.rbe: 746 -- block in activate
lib6plugin.rbe: 1758 -- tem_context
fredocornertool.rbe: 746 -- activate
fredocornertool.rbe: 194 -- select_tool
fredocornertool.rbe: 194 -- launch
fredocornertool.rbe: 176 -- action__mapping
data6.rb: 65 -- call
data6.rb: 65 -- launch_action
lib6plugin.rbe: 240 -- launch_action
bootstrap_fredocorner.rbe: 103 -- launch_action
bootstrap_fredocorner.rbe: 118 -- block in startup
lib6plugin.rbe: 1469 -- command_invoke
lib6plugin.rbe: 1449 -- block (2 levels) in build_config_commands
lib6traductor.rbe: 1385 -- block in add_command
controller_lordofthetoolbars.rbe: 133 -- block in new

fredo_corners.zip

brad_jessicamay · 27 Feb 2023, 11:41

Plugin no longer works with sketchup

Rich O Brien · 27 Feb 2023, 12:13

@brad_jessicamay said:

Plugin no longer works with sketchup

Some more info would help us help you.

Are your Sketchucation Tools updated to 4.3.0?

ExtensionStore | SketchUcation

3D SketchUp Community for Design and Engineering Professionals.

(sketchucation.com)

Is your Libfredo up to date?

SketchUp Plugins | PluginStore | SketchUcation

SketchUp Plugin and Extension Store by SketchUcation provides free downloads of hundreds of SketchUp extensions and plugins

(sketchucation.com)

Same for FredoCorner?

TIG · 27 Feb 2023, 12:15

That is not a very helpful post !
Please explain how it doesn't work, SketchUp version, all error messages, Ruby Console output etc, and confirm that you have the latest versions of the extension, and LibFredo6, and the SketchUcation toolset installed [for the licensing] and that you have restarted SketchUp to sync everything.