Version 3.9.0 - 02.11.2025

• Enabled zero size intermediate posts (balusters) for glass railing.
• Fixed a bug with floor level winders/landings for landing treads and covers.

Version 3.8.9 - 02.09.2025

• Added preview thumbnails for handrail fittings to the draw and edit menus of the stair tool.
• Fixed a bug with adjacent winders/landings for landing treads and covers.
• Fixed a minor bug with materials for handrail fittings.

Version 1.4.8 - 07.02.2025
Added "hvac" under misc. fixtures.
Added four generic hvac condensor units/sizes into the built-in library: 30X28, 30x32, 30x40, 36x32.

Version 3.8.8b - 02.06.2025

• Added the option for closed stringers.

@gullfo

The licenses will continue to work forever, but no free updates after the five years.

Version 3.8.8 - 02.06.2025

• Added landing treads, tread covers, carpet and stair runners for a winders.
• Added an SIP wall framing option for all wall types.
• Added five additional SIP parameters into the wall Draw and Edit menus.

Tutorial 66 - SIP Walls (8:03 min.)

The lifetime licensing options are now permanently listed on the website:

Medeek Design Inc. - Medeek Wall

Medeek Design Inc. - Medeek Wall

(design.medeek.com)

Just a few more loose ends before I jump back to the Floor plugin.

I would like to enable landing treads for winders, but things get a little interesting when the min. winder length is set to zero. Does this look okay?

Version 3.8.7b - 01.29.2025

• Fixed a bug with the baluster options.
• Enabled a zero stringer option for floating stairs.

Version 3.8.7 - 01.28.2025

• Enabed subtractive geometry for all stair assemblies.
• Added the following two parameters to the baluster sub-menus: Baluster Type (Square, Round, Glass, Cable), Baluster Height.
• Enabled intermediate posts for both glass and cable railing.
• Added the following cable railing options into the Stairs tab of the Global Settings: Cable Railing Spacing, Cable Railing Diameter.
• Added a bottom vertical offset parameter for bottom posts of a stair run.

Tutorial 65 - Cable and Glass Railing (13:26 min.)

Tutorial 64 - Modern Stairs (12:43 min.)

[b]Version 3.8.6[/b] - 01.25.2025

• Added tread covers, carpet and stair runners for T-shaped landings.
• Enabled the option for a single stringer (for modern style stairs).
• Added an option to disable the placeholder for landing/winder framing.
• Added a "GLASS" option for balusters within the built-in baluster materials.
• Added a "None" built-in option for the handrail profile parameter.

Tutorial 63 - Stair Runners and Tread Covers (10:06 min.)

Version 3.8.5 - 01.21.2025

• Updated the skirt boards to accommodate open treads.
• Added tread covers, carpet and stair runners for stairs, landings and winders.

Version 3.8.4 - 01.14.2025

• Added a minimum winder depth parameter for all stair winder types.
• Adjusted the deck handrail algorithm for narrow cap rails (2x4).

Version 3.8.3 - 01.10.2025

• Added a "deck" profile or option for handrails (with balusters) to the stair module.

Tutorial 61- Handrails for Decks (8:51 min.)

Version 3.8.2 - 01.05.2025

• Added balusters to the stair module for vertical and OTP handrails.
• Added newel posts to the stair module for vertical and OTP handrails.

Tutorial 60 - Balusters, Posts and Handrails (16:39)

Tutorial 59 - Multi-Board Treads and Side Spacers (7:15 min.)

@TIG The landings are not super sophisticated yet, mostly place holders. Still a bit of work to do on them.

The drop on the handrails (over-the-post) is fairly typical from what I've seen. I'm getting most of my reference material from ljsmith.com

Version 3.8.1 - 01.02.2025

• Added additional sizes to the post module for steel square tubes.
• Updated the side spacer algorithm for stairs.
• Enabled wood grain texture for treads, risers, thrust blocks and stringers.
• Enabled a multi-board tread and spacing parameter for stairs.