I might actually designate the initial release a BETA number but I'm still not decided on that yet.

Right now the plugin is all torn apart as I continue to add in a few additional features like presets and the "remove joist list" option:

This is my current desk setup, I've just added the big monitor to my left which gives me more screen real estate and improves my coding efficiency.  This is where all the magic happens, at least for now.

I also initially used the slab-on-grade code for moving edges of the floor perimeter but now that I'm testing it more extensively it appears that I should probably switch to the code I use for the complex roofs, so some additional adjustments required there as well.

This is how the sausage is made, one line of code at a time.

My wife said my design was boring so I saved a new version and let her try to come up with something a little more interesting…

Version 1.9.7 - 04.23.2024

• Fixed a compatibility bug with SketchUp 2024 (Fixnum & Bignum) while maintaining backward compatibility with previous versions of SketchUp.

Version 3.4.3 - 04.30.2024

• Added ceiling gypsum for tray and coffer trusses.
• Enabled the "Edit Truss Assembly" function for tray and coffer trusses (imperial and metric units).
• Enabled labels for tray and coffer trusses.
• Updated the license verification system with a more secure and improved algorithm.

The original 3D cladding tutorial showed the following four materials:

• Board and Batten
• Shiplap
• Log
• Lap

The three additional ones added since this video are:

• Metal
• Shiplap (Vertical)
• Dutchlap

There are now seven different types of 3D cladding materials one can configure within the Custom Material Library.

Version 3.5.0 - 05.26.2024

• Enabled "flat" ceiling gypsum for dutch gable rafter roofs.
• Enabled "flat" ceiling gypsum for hip rafter roofs.
• Fixed a bug with the global settings for rafter and truss roofs when the layer/tags option is turned off.

CRITICAL BUG FIX!
Version 3.4.7 introduced a bug for both rafter and truss roofs when the layers/tags option is turned off. This release fixes that bug. I highly recommend that everyone download this latest update to correct this bug.

Double sliders are kind of interesting windows.

Sometimes I forget how cool it is to be able to create something like this in SketchUp and have it animate like it does. Can I say I love my job?

The new Rafter Roof menu should be a bit more visual and intuitive for selecting the appropriate roof type:

Version 3.5.6 - 07.03.2024

• Enabled a graphical user interface for Rafter Roof selection.
• Enabled a graphical user interface for Floor selection.
• Fixed a bug introduced in Version 3.5.3 for all I-joist, lumber and truss floors (when adv. floor options disabled).

Version 2.0.1 - 08.01.2024

• Added a duplicate foundation assembly check to the regen module for the following foundation types: Stemwall, SOG, Slab, Stemwall Step, Grade Beam, Strip Footing, Footing.

The instructions for usage are the same as the recent update to the Wall plugin, see Wall Plugin Tutorial #51:

Added a “Floors” tab to the global settings, I’m sure this tab will get more populated as development progresses.

The tool tip in the draw and edit menu.

Batt and Blown insulation are now enabled:

In the Materials tab of the Global Settings you can switch between the more realistic textures/materials for lumber and pressure treated lumber:

Version 0.9.9m - 10.31.2024

• Added a "Wall" draw mode to the floor covering draw tool.
• Enabled "Perimeter Options" within the edit menu of the floor covering tool.

When drawing floor coverings you can now toggle between polyline, face or wall mode. Wall mode will allow you to select any number of Medeek walls (in logical order) which will define the boundary or perimeter of the floor covering. At first I was going to make this a fire-and-forget type of draw mode but instead it makes sense to retain the association even after the initial floor covering is created.

If any of the walls are deleted or somehow the "link" is broken the floor covering assembly will resort back to its "point" mode and the save points generated by the walls. So it will or should fail gracefully in these cases. Also note that there is a wall side associated with each wall assembly, this can easily be changed from EXT to INT or vice versa as needed.

I will make a new tutorial video showing this increased functionality and it should further help explain how this new system works and how to use it. I've been testing this feature for almost five days now so I think it is fairly robust but I am sure there may be specific cases that may defeat my algorithms. Bottom line, this is brand new so proceed with some caution.

Version 0.9.9o - 11.07.2024

• Added a Material X-Offset parameter for the floor covering material.
• Added a Material Y-Offset parameter for the floor covering material.
• Added a Material Rotation parameter for the floor covering material.

I will probably add in the same offsets and rotation parameters for the underlayment as well, but I will hold off for now until it is requested. I really want to get back onto the floor opening tool.

Tutorial 63 - Stair Runners and Tread Covers (10:06 min.)

Version 3.8.8b - 02.06.2025

• Added the option for closed stringers.

Version 1.4.9 - 02.11.2025

• Added three generic hvac condensor units/sizes into the built-in library (with WeatherGuardTM tops): 30X28_WG, 30x32_WG, 30x40_WG.

These additional variants added per customer request. They are the exact same as the similar sized units other than the addition of the weather guard top. Hopefully this gives enough selection for typical residential AC units however if there is need for any other styles etc... please let me know.

Version 3.9.2 - 03.15.2025

• Enabled an edge material/texture for built-in gypsum wall materials.

Version 3.6.5 - 03.16.2025

• Added energy/raised heels for coffer trusses (3 variants: wedge, slider and vertical w/ strut).
• Enabled a feature to selectively remove specific trusses from coffer truss assemblies.