Medeek Floor

medeek

Version 0.9.9e - 10.04.2024

Updated 2-Ply rim joists with air gap to extend joists that are in a lapped configuration.
Updated the Floor tab of the Global Settings with even more parameters for joist construction.
Added the following face mount Simpson hangers into the built-in library: MIU1819, MIU18111, MIU18114, MIU18116, MIU18118.

medeek

Tutorial #4: Deck Boards (6:42 min.)

medeek

Tutorial 5 - Rim Joists and Sill Plates (5:47 min.)

medeek

Tutorial 6 - Skewed Joist Hangers (5:03 min.)

medeek

Tutorial 7 - Subtractive Geometry (10:57 min.)

medeek

Tutorial 8 - Staggered Joists (5:06 min.)

medeek

One additional parameter for removing specific rim boards:

medeek

I am currently working on the floor covering tool which will then become the code template for the floor opening tool. Once I have those two big items completed I think we will finally have a mostly usable plugin.

I am sure there will be requests for additional features and/or changes to the functionality but the core of the plugin will be mostly in place. At that point I will test the plugin in as many states as possible and attempt to discover any final bugs or issues, then within a couple days I will probably release Version 1.0.0.

Further integration with the estimating module will also be something on the todo list in the weeks ahead.

As always please feel free to chime in with any specific requests or items you feel need to be addressed. I take all feedback and suggestions very seriously and I take everything under consideration. Ultimately I will weigh every idea in the balance and based on its relevancy and time considerations your ideas may quickly become a reality within this plugin or any other plugin in the Medeek family.

medeek

Is 8,000 sqft too large? I'm going to say yes, at least for most people.

Besides the regular mdkBIM plugins I also used the grid tool (Medeek Project), but the regular SketchUp grid tool works just as well. A grid tool is a requirement in my opinion, you really need something like this for laying things out correctly.

I also used TIG's mirror tool for certain manual modeling tasks.

The trim and extend tools in the Medeek Project were also very handy for creating my diagonal braces.

medeek

My wife said my design was boring so I saved a new version and let her try to come up with something a little more interesting…

Rich O Brien

@medeek Its a hotel!

medeek

@Rich-O-Brien

That's what my daughter said it looks like or a very serious bed and breakfast or even a small ski lodge.

medeek

Just a few more screenshots showing how I am stacking posts and beams to ensure a valid load path to the foundation:

medeek

And a few more cross sectional views and interesting screenshots:

medeek

Tutorial 10 - Creating a Deck with a Face (9:33 min.)

medeek

Version 0.9.9f - 10.17.2024

Enabled (cosmetic cutting) of individual deck boards.
Enabled removing of individual rim boards.

The cutting of deck boards was per user request.

Tutorial 11 - Cutting Deck Boards (6:05 min.)

medeek

Very interesting how Tony is using ChatGPT to create the random string to insert deck board cuts, never even considered this possibility.

medeek

After watching Tony's video I realized we probably need a couple additional advanced options for floors/decks with deck boards enabled. The two that immediately jump out at me are:

1.) Trim Band or Picture Frame

2.) Deck Wrap

Both of these can easily be achieved since they are very similar to my existing rim board code.

In fact, I can even enable a remove option for each of these modules similar to the rim board module. The parameters shall be:

1.) Trim Band: Yes/No
2.) Trim Width
Trim Thickness: Typically one would set this to the same thickness as the deck boards but I better provide this just in case.
3.) Trim Overhang
4.) Trim Corners: Lap, Reverse Lap, Miter
5.) Trim Material
6.) Remove Trim: Empty by Default

1.) Deck Wrap: Yes, No
2.) Wrap Depth
3.) Wrap Thickness
4.) Wrap Corners: Lap, Reverse Lap, Miter
5.) Wrap Material
6.) Remove Wrap: Empty by Default

medeek

Version 0.9.9g - 10.19.2024

Enabled wrap for decks.
Enabled a trim band (picture frame) for decks.

Note that these two feature can only be used when the deck board option is turned on.

medeek

Tutorial 12 - Trim and Wrap (6:42 min.)