SketchUp 2018
-
@dave r said:
Architects were the primary focus of SketchUp when @Last began development of it. They aren't just now turning into a tool for architects.
SketchUp Make users are no worse off than they were two days ago. They haven't lost the the use of SketchUp and it's not going to hurt their wallets.
The Wikipedia page says
@unknownuser said:
@Last Software[edit]
SketchUp was developed by startup company @Last Software of Boulder, Colorado, co-founded in 1999 by Brad Schell and Joe Esch.[7][8]SketchUp debuted in August 2000 as a general-purpose 3D content creation tool and was envisioned as a software program "that would allow design professionals to draw the way they want by emulating the feel and freedom of working with pen and paper in a simple and elegant interface, that would be fun to use and easy to learn and that would be used by designers to play with their designs in a way that is not possible with traditional design software. It also has user friendly buttons to make it easier to use."[3]
So, I couldn't say it was focused towards architects, but I can understand how an architect may see it that way. It's called biased vision. It is the same way I see that SketchUp would benefit of better uv-mapping - when I will be sent to Blender by some users. It is understandable that each of us see things in our personal way. Still, what's clear is that SketchUp was intended for people who wanted to draw (anything) in a less rigid manner.
Pushing active development in very specific areas of SketchUp clearly shows raised interest on a very specific category of those people who want to draw: the builders and the architects.
And yes, SU power comes from plugins, but when Trimble takes plugins functionality and makes it embedded in their program, seems more like indirectly screwing-over a plugin dev. I'm talking about Skalp here. While Skalp is certainly offering much more than SU does, I still consider that putting effort in making a redundant tool is not the way to support a flexible platform, grown by devs. -
@derei said:
@dave r said:
So, I couldn't say it was focused towards architects, but I can understand how an architect may see it that way. It's called biased vision.
The original vision for SketchUp was to be a digital version of sketching on a napkin. It was marketed to architects. The original logo was a house and a pencil.
That's not biased vision on my part. I'm not an architect, either.
-
@dave r said:
I don't have biased vision. I'm not an architect.
Do you have bionic vision like Steve Austin?
-
I'm sure dropping the Make version only came as there are MANY (note, not all, before I get flamed) Make users who abused the license (to which they agreed when installing the software).
Personally, I don't like online only software, in this case the added handicap of not being able to run plugins / extensions is problematic. But then I have Pro, and will be renewing my maintenance towards the end of the month, so this isn't an issue to me.
Some of the features / improvements they noted is almost like they did this especially for me, how well it has been implemented I'll have to see still.
-
@derei said:
So, I couldn't say it was focused towards architects
Layout, sun, sections, dimensions, Position Camera/Walk/Look Around, Geo Location, Match Photo, Two-point Perspective, IFC, etc...
To me, all these tools and features were created with architects in mind.
Not to mention the original logo, and the icons with buildings. Also the built-in materials categories: concrete, brick, cladding, carpets, roofing, stone, tiles, window, etc.SketchUp has been aiming at architects since the beginning. But it doesn't mean it can't be used in other domains.
-
@pixero said:
Sure do hope this is fake. If this is true it's even worse than expected.
SketchUp only gets advanced attributes as a new feature???
IFC export/import we have already and sections we already have with the Skalp extension.Looks to have been pretty much on the money.
-
@jiminy-billy-bob said:
@derei said:
So, I couldn't say it was focused towards architects
Layout, sun, sections, dimensions, Position Camera/Walk/Look Around, Geo Location, Match Photo, Two-point Perspective, IFC, etc...
To me, all these tools and features were created with architects in mind.
Not to mention the original logo, and the icons with buildings. Also the built-in materials categories: concrete, brick, cladding, carpets, roofing, stone, tiles, window, etc.SketchUp has been aiming at architects since the beginning. But it doesn't mean it can't be used in other domains.
Those tools were added by Google in their attempt to make a world full of 3d modelled buildings in google earth. That was a initiative to involve people in 3d modelling their cities. That was before they realized is less effective and turned on to automated (satellite) mapping.
Ad for layout, that was a tool to incentivise the pro version, a presentation layout, because natively sketchup has little formatting capabilities (will output window size, instead of paper size).
Trying to cling on features like "icon was a house" is equal to saying that I was born architect because I was drawing houses on napkins when I was a kid.
Also, textures are clearly general-purpose textures with focus on whatever you find around you.
I see many of this replies as emotional, making a lot of effort to justify SketchUp as an architect's tool. But ask yourself, what architect would use SketchUp without the plugins? None. Because it would be a pain as a professional architect to work in bare sketchup. But, as you said earlier, it can be used for anything, that's why the plugin development was so much encouraged. So, again - if it was targeted from the beginning to a specific sector, then the efforts would have been towards that sector only! -
Your profile states you're using SketchUp2015 Make, for product design.
Please clarify how the product design would not be a breach of the Make license?
Apart from your obvious disheartened replies here about the new release, what does SketchUp have to offer you that has you keep on using it?
-
@derei said:
Those tools were added by Google
That's the case for Geo Location and Match Photo, sure. But what else?
@derei said:
Ad for layout, that was a tool to incentivise the pro version
Layout was first released during the Google days, but its development actually started 2 years before Google acquired SketchUp. There was no Pro version at that time, because there was no Free version.
Plus, Google didn't care much about making money with SketchUp. If development hadn't already started, they wouldn't have created Layout.
I'm not making this up, I actually discussed this with the SketchUp team at DevCamp a few weeks ago.@derei said:
But ask yourself, what architect would use SketchUp without the plugins? None.
I know many architects who don't use plugins at all. The few that do, actually learned about them through me
I agree that I myself can't imagine using SketchUp without plugins, but it seems that for many architects it's enough. -
for all future versions - all the plugins developed by the community over the years are now essentially behind a trimble pay wall. zoink
-
anybody know if there is more detailed info on the updates and how they work (tutorial video perhaps) been having a play this morning, can't see what use the new layout functions perform just by reading the little blurb they put out on the release notes.
Also any way to know if the plugins that i had previously from plugin warehouse will work with 2018.
I just hope this version is not a glitch filled monster like 2017 was.
-
@juju said:
Your profile states you're using SketchUp2015 Make, for product design.
Please clarify how the product design would not be a breach of the Make license?
Apart from your obvious disheartened replies here about the new release, what does SketchUp have to offer you that has you keep on using it?
Juju, what my profile states may be obsolete/untrue/incomplete/incorrect... you, relying on that, when making a comment to my post shows that you are more focused to attack the person, than to debate the issue.
You don't know what I am using and for what. For your information, I am using licensed software for my professional work and my status wasn't updated in many years.
As for my "disheartened" replies, I have neither love nor hatred about the new release. I have a bit of disappointment, yes (and I made my reasons rather clear and objective, as much as I could)...and I am evaluating if it's worth paying a license upgrade for 2018... for now the balance inclines against it. I was trying to focus on facts, as much as I could, but now I have to respond to personal attacks, which is a waste of time. -
@derei said:
@juju said:
Your profile states you're using SketchUp2015 Make, for product design.
Please clarify how the product design would not be a breach of the Make license?
Apart from your obvious disheartened replies here about the new release, what does SketchUp have to offer you that has you keep on using it?
Juju, what my profile states may be obsolete/untrue/incomplete/incorrect... you, relying on that, when making a comment to my post shows that you are more focused to attack the person, than to debate the issue.
You don't know what I am using and for what. For your information, I am using licensed software for my professional work and my status wasn't updated in many years.
As for my "disheartened" replies, I have neither love nor hatred about the new release. I have a bit of disappointment, yes (and I made my reasons rather clear and objective, as much as I could)...and I am evaluating if it's worth paying a license upgrade for 2018... for now the balance inclines against it. I was trying to focus on facts, as much as I could, but now I have to respond to personal attacks, which is a waste of time.well, for the benefit of all, please update your profile
you still have not stated / confirmed your SketchUp use...
I am asking because I am tired of people having a lot to say about something they have paid absolutely zero for, specifically when they are using said software for commercial purposes / against license terms. When you are paying for something, I would support that you have a foot to stand on when complaining. If not, I would not pay complaints much attention as they are merely comments from a person who isn't contributing to the R&D costs of the product.
-
but it seems that the "make" version does not continue. just my.scketchup online
-
Deleting new versions of make probly saved me $1000 as I was looking at up dating my computer as reqired to run 2017 and beyound. I will use 2015 ( never got comfortable with the newer UI) for my woodshop hoby. As I created some plugins and several others. I would urge all users that want to continue with make version to dowload and save the install files some where safe for future use if nrecessary.
-
Make users do not have any reason to complain anything concerning the use of a software donated to them for FREE with (unfortunately) nearly the same core feature set of the commercial Pro version!
As already elaborated above, SU initally was made by @Last primarily for and dedicated to architects, nothing else.
Comparing SU with Blender shows not being aware of the differences in 3D modeling for construction purposes compared with a modeler for modeling this fancy stuff in the area of Digital Content Creation... sure, both are 3D modelers... and the learning curve of SU is still lightyears flatter than Blender.
Comparing the effort to enhance the rectangle tool with a full blown U-V mapping in your other concerning post, c'mon, your surely kiddin'
-
What the heck link did you guys click on to update to the 2018 version?
-
@ntxdave said:
What the heck link did you guys click on to update to the 2018 version?
-
@sketch3d.de said:
Comparing the effort to enhance the rectangle tool with a full blown U-V mapping in your other concerning post, c'mon, your surely kiddin'
So do you think that writing some decent mapping tools instead of the useless rectangle was impossible.
Meanwhile there are tons of plugs free or very inexpensive (Trupaint, SketchUV,Wraper..) which sorted the problem.. Same goes for other ESSENTIALS modeling features sorted by plugins (SubD, Artisan, Vertex Tools, Curviloft, Flowify, Profile Builder, Skatter..).
But we still have to read the same story "too difficult blablabla" "full-blown blablabla" over and over again.
Then, you're right.. I'm kidding. -
Advertisement