[Plugin] Shape Bender Beta
-
As far as I can tell, Shape Bender doesn't need parametric.rb but you should probably have it anyway because other plugins do use it. Get it here.
-
Yes, is there anyone out there that can help me with the plugin Shape Bender by Chris Fullmer ? I believe I loaded it correctly but maybe not I'm getting an load error message , when I go into sketchup. When I downloaded the file I unziped it, I copied the file and pasted it into the plugins folder, restarted windows and when it came back on and i started sketchup with this Load Error ( Error Loading File clf_shape_bender_loader.rb no such file to load -- progressbar.rb ) . Can anyone help me? I tried this twice w/no luck I would like to get this to work. Thank you john
-
@jspro said:
I believe I loaded it correctly but maybe not I'm getting an load error message , when I go into sketchup. When I downloaded the file I unziped it, I copied the file and pasted it into the plugins folder, restarted windows and when it came back on and i started sketchup with this Load Error ( Error Loading File clf_shape_bender_loader.rb no such file to load -- progressbar.rb ) .
You also need to install progressbar.rb for here: http://www.smustard.com/script/ProgressBar
(The installation instructions clearly say this)
-
Well, I found a remedy .. kind of.
I commented out all the lines updating the progress bar with a comment character, #
. . . . #pb.update(i) . . .there are 7 of them.Unfortunately, I had to do that with clf_color_by_slope, clf_color_by_z and clf_greeble_2
My system doesn't seem to like the progress bar. Even after downloading a fresh copy from smustard
yesterday.If I find out why (it's a mystery), I'll post it.
Again, it's a great Plug-in. ... hope this helps anyone w/ the same problem.
-
Hasn't that nil error been repeated a few times along in this thread? Might be worth adding a note in the first post about it. No one is going to find it dug into n-number of pages.
-
I agree it's not the best .... just a trouble shooting remedy.
I'll try your approach.
TIG has suggested a few things also ... (my post on one of the other plug-ins)
Appreciate your input.
-
Plugin looks great . . . but, i'm getting this feedback :
it seems to lock-up at 7% or 20%
any suggestions ?
I posted a temporary trouble shooting remedy, just after this post.
http://forums.sketchucation.com/viewtopic.php?f=323&t=18210&start=1020#p422479
(is that what you mean ?, TT) -
Grate one ! THNX
-
Hi all,
Using the plugin with dynamic component it crashes.
Has anyone successfully bent a DC?Otherwise, it works fine.
-
Since the Component [DC] is copied to make the bent version it may well conflict with a DC as there is generally only one instance of each variant.
You can copy the DC off to one side and explode it down to its raw geometry and then make a group of that, and then bend that group - it will have lost all of it's DC-ness, so those issues should be avoided...
It's a good idea to do complex operations, like bending, on an object located in a relatively empty SKP, and recombine things into a combo-model afterwards - so exploding the DC in these circumstances seems quite possible.
You can't expect a DC to retain its DC-ness/properties after bending it, as all of its axes etc will be messed up, even if it were to make it through the processing...
-
grab TIG's "undc" script and run that before doing the bend.
-
@gullfo said:
grab TIG's "undc" script and run that before doing the bend.
I'd forgotten I made that
http://forums.sketchucation.com/viewtopic.php?p=382224#p382224 -
it was awesome plugin tools
thanks for sharing -
@tig said:
I'd forgotten I made that
http://forums.sketchucation.com/viewtopic.php?p=382224#p382224it's one of my most important tools now
- i can use a huge number of DC in my models then "un-DC" them and ship the model out without worrying that my DC will be distributed... -
It's not even a 'tool'... just a 'code snippet'...
Glad it was useful
-
Hey everyone? How do I run this script? I have no idea how to get this "tool" to show up in Sketchup to use it
-
@maladzien said:
Hey everyone? How do I run this script? I have no idea how to get this "tool" to show up in Sketchup to use it
See if this article helps you: http://www.thomthom.net/thoughts/2012/01/installing-plugins-for-google-sketchup/
-
Hello all,
First I want to say that my english writing is not very good, so sorry for the mistakes.
I have a little help from google
I am very excited about the plugin, I just can not get it working properly.
I select my component.
Select the straight line
Select the curve line
I see that both lines a start and an end appears
but that's all, nothing further happened. I can use the up and down arrow keys to change the start and end.
Also when I press enter then nothing happens.the straight line is equal to the red axis, the curved line i tried on all axes.
I really do not know what I'm doing wrongI hope I have explained clearly
Thanks for the response -
Roy
Have you installed the additional helper script
progressbar.rb, which is download-able free from Smustard.com.
It's a common issue with less experienced members forgetting about addition helpers like this for the more complex tools - although it is clearly mentioned and linked in the tool's download page.
Also make sure that the 'line' is parallel to the X[red] axis and that it touches no other geometry, also note that the 'curve' must not touch other geometry either.
Also don't try to bend tiny or enormous objects [most day-to-day sized things should be OK, but tiny parts for swiss-watches or entire cities will create issues]...If you are still getting issues then try running the tool after you've opened the Ruby Console. Post any error messages you get in it, this might give us a better clue as to what you have inadvertently done wrong
-
Hello TIG,
Sometimes is the solution so simple that you overlook them
I have the plugin and the progressbar removed and reinstalled and now it works perfectly
Thanks you for your answer
Advertisement