[Plugin][$] JointPushPull Interactive - v4.9a - 02 Apr 25

fredo6 · 2 Mar 2014, 20:40

As a brand new user to Fredo's tools I am sure that this is all incredibly amazing.

Only thing is that the GUI looks garbled on pretty much anything other than the standard DPI settings of Windows (which is much too low for nowadays high resolution screens):

This is with Windows screen DPI set to 125%.

Anyway, keep up the great work
Regards David.P

It is advised to keep a 100% resolution because the scripts have no control over the size of the text displayed in the GUI.

Some functions are also available in the VCB and contextual menus.

Fredo

fantoosh420 · 5 Mar 2014, 06:57

Fredo

It is for you. please investigate the file.. Joint Push pull not working. giving error.

TO SKETCHUCATION.skp

fredo6 · 5 Mar 2014, 11:07

Thanks for signaling.

It is on my list to provide a safe generation mode, as a backup to the current generation mode (which is fast, but assumes the shape is not ill-formed).

For your model, the problem comes from a lot of lonely vertices (i.e. split edges).

I suggest you clean them up with, for instance, FredoTools::EdgeInspector or Thomthom's Cleanup .

Then the generation happens without error.

Fredo

TIG · 5 Mar 2014, 11:11

@Amit

Use Fredo's Tools to 'Remove Lonely Vertices' - you have several unneeded vertices along the edges of the form.
These are very closely spaced and create overlapping extrusions making it fail
Retry JointPushPull on the corrected form - it will then work...

I just tried it and it worked...
[Fredo beat me to it ! ]

fantoosh420 · 5 Mar 2014, 11:33

@ Fredo & TIG

I already cleaned that before you guys mentioned it but i thought i would be good to share it with you guys so that if it is happening because of any undiscovered reason it can be sorted out.

As far as having a lot of lonely vertices, it is because of the organic nature of modelling i am currently doing. i am doing a hotel project on the hill and a meandering road was also being modelled which is meant to access the hotel (the surface i sent was one face of a retaining wall coming along the road). I was doing it without cleaning up the geometry due to save time and end the end spent all the saved time due to problem. ... never mind since fredo is aware of the situation, a solution is inevitable.

fantoosh420 · 5 Mar 2014, 11:37

and bi the way fredo, how can i donate you? i don't have a credit card so facing problem... i wanted to donated to TIG to for cutNfill plugin but same problem happened. is there any other way? if no easy way out then i guess i need to figure out a credit card from any of my friend.

TIG · 5 Mar 2014, 11:39

We'll both accept PayPal donations.
You can link those to a Bank-Account without any Credit-Card being needed...

fantoosh420 · 5 Mar 2014, 11:48

@ TIG.. i tried that.... i guess direct debit by paypal from bank account is not supported here in India. My bank account is connected to paypal but even then it asks for a credit card. it says bank account is to credit money into your account but for debit you need a card. may be i need to figure out a credit card only...

Ruf85 · 7 Mar 2014, 15:15

sorry I have this problem with the last version.
Why?
When I use the Round push pull
Thanks

Date: 07-Mar-14 16:10:03
An error occured in Round Push Pull
Error in generation of the geometry

undefined method `line_vec=' for nil:NilClass

JointPushPullGeometry.rb: 1450 -- geometry_rounding_mesh
JointPushPullGeometry.rb: 1275 -- geometry_create_roundings
JointPushPullGeometry.rb: 1274 -- each
JointPushPullGeometry.rb: 1274 -- geometry_create_roundings
JointPushPullGeometry.rb: 262 -- geometry_robot_prepare_mesh
JointPushPullGeometry.rb: 206 -- robot_call_action
JointPushPullGeometry.rb: 177 -- geometry_robot_exec
JointPushPullGeometry.rb: 160 -- geometry_robot
JointPushPullGeometry.rb: 75 -- geometry_execute
Lib6Operation.rb: 317 -- call
Lib6Operation.rb: 317 -- step_geometry
Lib6Operation.rb: 358 -- start_execution
JointPushPullGeometry.rb: 75 -- geometry_execute
JointPushPullTool.rb: 879 -- go_preview_or_geom
JointPushPullTool.rb: 690 -- dragging_stop
JointPushPullTool.rb: 1303 -- onLButtonUp

fredo6 · 7 Mar 2014, 18:22

@ruf65,

Could you post or PM me the model. I found the problem but would like to check that this is cured.

Thanks

Fredo

Ruf85 · 9 Mar 2014, 19:24

Sorry for the delay.
It's an element of the roof tile. I would model the front side.
Just for teach I use your plugins but I had the error
sorry for my bad english. I hope you understand me.

SKUpro8

brodie · 11 Mar 2014, 23:19

I'm used to the old JPP so I'm not used to all of the options with the new one which may be causing my issue here. When I use JPP on a cone instead of basically making a bigger cone it pushes the point off to one side and does some weird stuff at the base.

What am I doing wrong here?

-Brodie

mitcorb · 12 Mar 2014, 01:23

Hi, Brodie:
I was trying this out and managed to generate a ruby error:

Date: 11-Mar-14 19:30:04
An error occured in Vector Push Pull
Error in generation of the geometry

Not a valid argument type

JointPushPullGeometry.rb: 434 -- *
JointPushPullGeometry.rb: 434 -- block in geometry_create_top_face
JointPushPullGeometry.rb: 432 -- collect
JointPushPullGeometry.rb: 432 -- geometry_create_top_face
JointPushPullGeometry.rb: 251 -- block in geometry_robot_prepare_mesh
JointPushPullGeometry.rb: 250 -- each
JointPushPullGeometry.rb: 250 -- each_with_index
JointPushPullGeometry.rb: 250 -- geometry_robot_prepare_mesh
JointPushPullGeometry.rb: 206 -- robot_call_action
JointPushPullGeometry.rb: 177 -- geometry_robot_exec
JointPushPullGeometry.rb: 160 -- geometry_robot
JointPushPullGeometry.rb: 75 -- block in geometry_execute
Lib6Operation.rb: 317 -- call
Lib6Operation.rb: 317 -- step_geometry
Lib6Operation.rb: 358 -- start_execution
JointPushPullGeometry.rb: 75 -- geometry_execute
JointPushPullTool.rb: 879 -- go_preview_or_geom
JointPushPullTool.rb: 690 -- dragging_stop
JointPushPullTool.rb: 1303 -- onLButtonUp

But I was trying them all. I did get the double shell once and the slanted one with the dropped bottom. Try jpp on whole selection with smooth surfaces.

mitcorb · 12 Mar 2014, 02:10

Here's a bit of what I did. xray view.
I think it also depends where on the face you trigger the jpp.

brodie · 14 Mar 2014, 18:15

Here's what I'm getting...

Dropbox - Error - Simplify your life

(www.dropbox.com)

mitcorb · 14 Mar 2014, 18:51

Hi, Brodie:
I can't deal with the swf, sorry. Maybe someone else?

xiombarg · 17 Mar 2014, 03:41

I seem to be having problems with the option of toggling axes from world to local. It doesn't recognize local, only world. I've tried it on both working models and new file. Any clues on this?

fredo6 · 17 Mar 2014, 10:41

NEW RELEASE: JointPush Pull Interactive v3.2b - 17 Mar 14

JointPushPull Interactive 3.2b fixes a number of bugs related to the modes of forced planar direction, which basically did not work.
Thanks to xiombarg for signaling this problem .

See main post of this thread for Download of JointPushPull.

Fredo

xiombarg · 17 Mar 2014, 19:43

I've updated everything, but it still doesn't respond to the local toggle. I've tried to go through and get rid of any unused plugin files and I've used your 'purge obsolete files' utility but to no effect.

I guess I could just re-install everything and see what happens.

fredo6 · 17 Mar 2014, 19:58

@xiombarg said:

I've updated everything, but it still doesn't respond to the local toggle. I've tried to go through and get rid of any unused plugin files and I've used your 'purge obsolete files' utility but to no effect.

I guess I could just re-install everything and see what happens.

Could you post or PM the model where you have the problem.

The local toggle enable to use the axes of the component which contains the picked face selected, instead of the model axes.

Fredo