sketchucation logo sketchucation
    • Login
    โ„น๏ธ Licensed Extensions | FredoBatch, ElevationProfile, FredoSketch, LayOps, MatSim and Pic2Shape will require license from Sept 1st More Info

    [Plugin][$] Curviloft 2.0a - 31 Mar 24 (Loft & Skinning)

    Scheduled Pinned Locked Moved Plugins
    1.3k Posts 297 Posters 2.4m Views 296 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • jgbJ Offline
      jgb
      last edited by

      Thanks guys, and for the PM "solutions" as well. ๐Ÿ‘ I will look at them later this week, as I have no time just now.

      Actually I'm not looking for a solution. I have it in the rightmost copy, and it is good enough for my learning purposes. I will not use that particular duct in any model, as it was not to scale, nor to fit the actual airplane at this time. The "real" one will be shorter and the curves a bit more involved to avoid aircraft structure. It is simply a learning exercise for Curviloft using a shape I had difficulty creating using a mesh and tweaking it.

      The essence of my post was that it seems Curviloft tried to follow the original DIRECTION of the flipped copy of a curve in segments causing a twist in the surface, and was for Fredo to analyze. Once I welded the flipped curve segments, my duct formed correctly.


      jgb

      1 Reply Last reply Reply Quote 0
      • R Offline
        rock1
        last edited by

        wow,what a plugin fredo!

        I should have joined this forum earlier. ๐Ÿ˜„ I never knew about it. What a cool collection of plugins is present here!!

        Signature removed by SCF Admin

        1 Reply Last reply Reply Quote 0
        • Rich O BrienR Online
          Rich O Brien Moderator
          last edited by

          Hi Fredo,

          Can you look at this file?

          CurviLoft_Helix.skp

          Using 'Skinning of Shapes' but slight errors appear?

          Download the free D'oh Book for SketchUp ๐Ÿ“–

          1 Reply Last reply Reply Quote 0
          • jeff hammondJ Offline
            jeff hammond
            last edited by

            @unknownuser said:

            [attachment=2:o25qv8mt]<!-- ia2 -->CurviLoft_Helix.skp<!-- ia2 -->[/attachment:o25qv8mt]

            Using 'Skinning of Shapes' but slight errors appear?

            you have to switch the properties..

            for instance, try the same thing with tig's extrude edges by rails.. use the helix lines as the rails and the little shorties as profiles (well, make them curves first).. you'll see a similar though actually worse error.. then, do it again but choose the helix as profiles and the little lines as rails.. all is better.

            to do that in curviloft, click in a black area of the preview skin to bring up this dialog:

            [attachment=1:o25qv8mt]<!-- ia1 -->001.jpg<!-- ia1 -->[/attachment:o25qv8mt]

            then use the top left button to re-orient
            [attachment=0:o25qv8mt]<!-- ia0 -->002.jpg<!-- ia0 -->[/attachment:o25qv8mt]


            001.jpg


            002.jpg

            dotdotdot

            1 Reply Last reply Reply Quote 0
            • Rich O BrienR Online
              Rich O Brien Moderator
              last edited by

              Thanks Jeff.

              Strangely I did use TIG EebyR it it worked perfectly. Though I used one shawty as both 'Profile' and 'Melding Profile'. Didn't try it with separate profiles.

              Anyway thanks for the fix ๐Ÿ‘

              Download the free D'oh Book for SketchUp ๐Ÿ“–

              1 Reply Last reply Reply Quote 0
              • tibetT Offline
                tibet
                last edited by

                hi ,
                i have deleted curviloft icons by accident.
                could you please tell me how to restore them in sketchup 8 pro
                thanks

                SU 2015 Pro on Win10 x64

                1 Reply Last reply Reply Quote 0
                • TIGT Offline
                  TIG Moderator
                  last edited by

                  @tibet said:

                  hi ,
                  i have deleted curviloft icons by accident.
                  could you please tell me how to restore them in sketchup 8 pro
                  thanks
                  Go to the first post in this thread and download the files and install them as instructed. The icons will be restored and some other scripts etc will be overwritten - but that doesn't matter... ๐Ÿ˜•
                  However, if you don't mean you've actually thrown away the files but you mean you've 'closed the toolbar' or 'deactivated the extension' then simply reactivate the extension through Window > Preferences > Extensions and/or switch on the toolbar through View > Toolbars...

                  TIG

                  1 Reply Last reply Reply Quote 0
                  • Dave RD Offline
                    Dave R
                    last edited by

                    @tibet said:

                    hi ,
                    i have deleted curviloft icons by accident.
                    could you please tell me how to restore them in sketchup 8 pro
                    thanks

                    It's interesting what you can find on these forums.

                    Etaoin Shrdlu

                    %

                    (THERE'S NO PLACE LIKE)

                    G28 X0.0 Y0.0 Z0.0

                    M30

                    %

                    1 Reply Last reply Reply Quote 0
                    • P Offline
                      pythiaz
                      last edited by

                      Super LOL~!! ๐Ÿ˜Ž

                      1 Reply Last reply Reply Quote 0
                      • 66searcher6 Offline
                        66searcher
                        last edited by

                        thanks fredo6
                        ๐Ÿ‘ one of the best of all su plugins ! well done!
                        thanks Karl (Charly)
                        ๐Ÿ‘ great works by you motivates me...good luck.


                        tester.jpg

                        http://hamidtoliat.deviantart.com/

                        1 Reply Last reply Reply Quote 0
                        • fredo6F Offline
                          fredo6
                          last edited by

                          Joel,

                          Can you post the model or a typical case, because I am not clear on the issue you face

                          Fredo

                          1 Reply Last reply Reply Quote 0
                          • jgbJ Offline
                            jgb
                            last edited by

                            I may be doing something wrong, but there is a very simple curve that Curviloft (CL) seems to have a problem with.

                            If I have 2 surfaces that I punch a hole in, say a round airplane fuselage that I put a round window or door opening in, CL won't face the rim of the opening.

                            After I delete the 2 wall bits in the opening, I select the 2 perimeters and call CL to do its magic. In effect, create the rim or ring. All I get are magenta lines.

                            If I join 1 pair of verticies, still no go. I have to draw 2 joiners (close together), and deselect the lines of the perimeter between the 2 joiners and CL does its magic in a flash.

                            This happens even to 2 rings in free space, unconnected to anything. I have to break both rings, then rejoin them after CL makes the curve.

                            Yet yesterday I made a large complex curved door, and CL rimmed it perfectly in 5 seconds, compared to 20 minutes or more to my making the perimeter manually. So I'm NOT complaining.


                            Fredo, as requested. The model I discovered this is way too big to upload, so I made an example.

                            I drew 2 rings offset in X, Y & Z axis.
                            Select 2 rings alone and CL will not form a rim.
                            Join rings with only 1 line, select all and CL creates a twisted rim.
                            Join rings with 2 lines and select all, no rim forms.
                            Deselect 2 bits of ring segment and CL forms proper rim.

                            As explained above, 4 sets of rings


                            jgb

                            1 Reply Last reply Reply Quote 0
                            • H Offline
                              hygicell
                              last edited by

                              I am getting a lot of error messages on the Fredo6 plugins at startup of Sketchup 8 Pro:
                              please help
                              Error Loading File H:/programmas/google/Google SketchUp 8/Plugins/CURVILOFT_Dir_10/CurviloftAlgo.rb
                              uninitialized constant Curviloft::T6Error Loading File H:/programmas/google/Google SketchUp 8/Plugins/CURVILOFT_Dir_10/CurviloftCurveMover.rb
                              uninitialized constant Curviloft::T6Error Loading File H:/programmas/google/Google SketchUp 8/Plugins/CURVILOFT_Dir_10/CurviloftLoader.rb
                              uninitialized constant Curviloft::T6Error Loading File H:/programmas/google/Google SketchUp 8/Plugins/CURVILOFT_Dir_10/CurviloftPalette.rb
                              uninitialized constant Curviloft::T6Error Loading File H:/programmas/google/Google SketchUp 8/Plugins/CURVILOFT_Dir_10/CurviloftTool.rb
                              uninitialized constant Curviloft::T6Error Loading File H:/programmas/google/Google SketchUp 8/Plugins/CURVILOFT_Dir_10/__loader.rb
                              undefined method effective_load' for nil:NilClassError Loading File H:/programmas/google/Google SketchUp 8/Plugins/CURVILOFT_Dir_11/CurviloftAlgo.rb uninitialized constant Curviloft::T6Error Loading File H:/programmas/google/Google SketchUp 8/Plugins/CURVILOFT_Dir_11/CurviloftCurveMover.rb uninitialized constant Curviloft::T6Error Loading File H:/programmas/google/Google SketchUp 8/Plugins/CURVILOFT_Dir_11/CurviloftPalette.rb uninitialized constant Curviloft::T6Error Loading File H:/programmas/google/Google SketchUp 8/Plugins/CURVILOFT_Dir_11/CurviloftTool.rb uninitialized constant Curviloft::T6Error Loading File H:/programmas/google/Google SketchUp 8/Plugins/CURVILOFT_Dir_11/__loader.rb undefined method effective_load' for nil:NilClassError Loading File H:/programmas/google/Google SketchUp 8/Plugins/CURVILOFT_Dir_11/bootstrap_Curviloft.rb
                              uninitialized constant Curviloft::T6Error Loading File H:/programmas/google/Google SketchUp 8/Plugins/FREDOSCALE_Dir_21/__loader.rb
                              undefined method effective_load' for nil:NilClassError Loading File H:/programmas/google/Google SketchUp 8/Plugins/FREDOSCALE_Dir_21/bootstrap_FredoScale.rb (eval):1: uninitialized constant FredoScale::T6Error Loading File H:/programmas/google/Google SketchUp 8/Plugins/FREESCALE_Dir_10/FreeScale_Common.rb uninitialized constant FreeScale::T6Error Loading File H:/programmas/google/Google SketchUp 8/Plugins/FREESCALE_Dir_10/FreeScale_Tool.rb uninitialized constant FreeScale::SU_MAJOR_VERSIONError Loading File H:/programmas/google/Google SketchUp 8/Plugins/FREESCALE_Dir_10/__loader.rb undefined method effective_load' for nil:NilClassError Loading File H:/programmas/google/Google SketchUp 8/Plugins/GHOSTCOMP_Dir_10/GhostCompAlgo.rb
                              uninitialized constant GhostComp::T6Error Loading File H:/programmas/google/Google SketchUp 8/Plugins/GHOSTCOMP_Dir_10/GhostCompLoader.rb
                              uninitialized constant GhostComp::T6Error Loading File H:/programmas/google/Google SketchUp 8/Plugins/GHOSTCOMP_Dir_10/__loader.rb
                              undefined method effective_load' for nil:NilClassError Loading File H:/programmas/google/Google SketchUp 8/Plugins/HOVERSELECT_Dir_11/HoverSelect_Palette.rb uninitialized constant HoverSelect::T6Error Loading File H:/programmas/google/Google SketchUp 8/Plugins/HOVERSELECT_Dir_11/HoverSelect_main.rb uninitialized constant HoverSelect::T6Error Loading File H:/programmas/google/Google SketchUp 8/Plugins/HOVERSELECT_Dir_11/__loader.rb undefined method effective_load' for nil:NilClassError Loading File H:/programmas/google/Google SketchUp 8/Plugins/ROUNDCORNER_Dir_22/__loader.rb
                              undefined method effective_load' for nil:NilClassError Loading File H:/programmas/google/Google SketchUp 8/Plugins/ROUNDCORNER_Dir_22/bootstrap_RoundCorner.rb uninitialized constant RoundCorner::T6Error Loading File H:/programmas/google/Google SketchUp 8/Plugins/TOS_Dir_18/EraserOnSurface.rb uninitialized constant SUToolsOnSurface::T6Error Loading File H:/programmas/google/Google SketchUp 8/Plugins/TOS_Dir_18/FreehandOnSurface.rb uninitialized constant SUToolsOnSurface::T6Error Loading File H:/programmas/google/Google SketchUp 8/Plugins/TOS_Dir_18/LibOnSurface.rb uninitialized constant SUToolsOnSurface::T6Error Loading File H:/programmas/google/Google SketchUp 8/Plugins/TOS_Dir_18/LineOnSurface.rb uninitialized constant SUToolsOnSurface::T6Error Loading File H:/programmas/google/Google SketchUp 8/Plugins/TOS_Dir_18/OffsetAlgoOnSurface.rb uninitialized constant SUToolsOnSurface::T6Error Loading File H:/programmas/google/Google SketchUp 8/Plugins/TOS_Dir_18/OffsetOnSurface.rb uninitialized constant SUToolsOnSurface::T6Error Loading File H:/programmas/google/Google SketchUp 8/Plugins/TOS_Dir_18/PaletteOnSurface.rb uninitialized constant SUToolsOnSurface::T6Error Loading File H:/programmas/google/Google SketchUp 8/Plugins/TOS_Dir_18/PolylineOnSurface.rb uninitialized constant SUToolsOnSurface::T6Error Loading File H:/programmas/google/Google SketchUp 8/Plugins/TOS_Dir_18/__loader.rb undefined method effective_load' for nil:NilClassError Loading File H:/programmas/google/Google SketchUp 8/Plugins/TOS_Dir_18/bootstrap_OnSurface.rb
                              uninitialized constant SUToolsOnSurface::T6Error Loading File H:/programmas/google/Google SketchUp 8/Plugins/TT_Lib2/arc.rb
                              uninitialized constant TTError Loading File H:/programmas/google/Google SketchUp 8/Plugins/TT_Lib2/attributes.rb
                              uninitialized constant TTError Loading File H:/programmas/google/Google SketchUp 8/Plugins/TT_Lib2/babelfish.rb
                              uninitialized constant TTError Loading File H:/programmas/google/Google SketchUp 8/Plugins/TT_Lib2/bezier.rb
                              uninitialized constant TTError Loading File H:/programmas/google/Google SketchUp 8/Plugins/TT_Lib2/binary.rb
                              uninitialized constant TTError Loading File H:/programmas/google/Google SketchUp 8/Plugins/TT_Lib2/bounds.rb
                              uninitialized constant TTError Loading File H:/programmas/google/Google SketchUp 8/Plugins/TT_Lib2/color.rb
                              uninitialized constant TTError Loading File H:/programmas/google/Google SketchUp 8/Plugins/ruby/singleton.rb
                              undefined method extend_object' for Singleton'

                              1 Reply Last reply Reply Quote 0
                              • TIGT Offline
                                TIG Moderator
                                last edited by

                                Frank

                                Sounds like you haven't got all of the files installed in the right places ?
                                Please reread the installation instructions.
                                Also see this thread for help on extracting zipped files and keeping their subfolder structure with Plugins etc http://forums.sketchucation.com/viewtopic.php?f=323&t=35746
                                Also if you have inadvertently put files directly into Plugins that ought to be within a subfolder, then please remove them as they might cause unexpected results as they will then auto-load at startup rather than when the main tool wants them to...

                                TIG

                                1 Reply Last reply Reply Quote 0
                                • jgbJ Offline
                                  jgb
                                  last edited by

                                  @unknownuser said:

                                  Joel,

                                  Can you post the model or a typical case, because I am not clear on the issue you face

                                  Fredo

                                  Fredo

                                  I did! I appended it to my post, but so far no reply.


                                  jgb

                                  1 Reply Last reply Reply Quote 0
                                  • jeff hammondJ Offline
                                    jeff hammond
                                    last edited by

                                    @jgb said:

                                    @unknownuser said:

                                    Joel,

                                    Can you post the model or a typical case, because I am not clear on the issue you face

                                    Fredo

                                    Fredo

                                    I did! I appended it to my post, but so far no reply.

                                    i can skin that thing with zero problems.
                                    i think you might be using the wrong tool.. i think you're trying to use curviloft's Skinning when you should be using regular Loft (the first of the 3 icons in the toolbar)

                                    just select the two rings then click on the Loft icon.

                                    dotdotdot

                                    1 Reply Last reply Reply Quote 0
                                    • H Offline
                                      hygicell
                                      last edited by

                                      @tig said:

                                      Frank

                                      Sounds like you haven't got all of the files installed in the right places ?
                                      Please reread the installation instructions.
                                      Also see this thread for help on extracting zipped files and keeping their subfolder structure with Plugins etc http://forums.sketchucation.com/viewtopic.php?f=323&t=35746
                                      Also if you have inadvertently put files directly into Plugins that ought to be within a subfolder, then please remove them as they might cause unexpected results as they will then auto-load at startup rather than when the main tool wants them to...

                                      I have reinstalled everything as per the instructions
                                      then ran duplicate cleaner 2.0 to find any .rb leftovers from the previous installation directly into plugins folder and erased them

                                      the problem remains

                                      should I be looking for other files than with the .rb extension and erase these duplicates too?

                                      Frank

                                      1 Reply Last reply Reply Quote 0
                                      • TIGT Offline
                                        TIG Moderator
                                        last edited by

                                        Please don't start removing files willy-nilly.
                                        Only the the files inside the subfolders that have equivalents wrongly installed in Plugins are to be removed - it's recommended that these put into a 'disabled folder' [erasing them is a little drastic - especially when you are not sure what you are doing - at least that way they can be moved back if you've messed up !]. There will also be .rb files in Plugins installed by other tools that you still need! AND of course there are .rb files installed as 'loaders' to run files inside subfolders that come in the zip file 'loose' rather than in a subfolder of Plugins...

                                        If you are getting similar error messages then are you sure the files and files in relative subfolders are installed properly. I noticed that you have a drive with an unusual path - H:/programmas/google/Google SketchUp 8/Plugins/ - the default is something like C:/Program Files/Google/Google SketchUp 8/Plugins/
                                        Please type this in the Ruby Console + <enter> and post the results $LOAD_PATH
                                        It should include your H: folder Plugins path.
                                        With Vista/Win7 there can be a 'Compatibility Files' issue [ยฟArchivos de Compatibilidad?]... which happens if you don't have full security permissions to read/write/etc to the the Plugins folder and/or its subfolders and/or files. It looks like you have done it OK, and there are no error messages... but really the OS has put the new things in a separate subfolder to protect you from yourself! In these cases there's a 'Compatibility Files' button added to the top of the window of the affect folder[s] - you click on that to see what's messed up... Fix your permissions under properties, security as an admin...

                                        Can you post a screen-shot showing your Plugins folder structure etc if none of this is working...

                                        TIG

                                        1 Reply Last reply Reply Quote 0
                                        • H Offline
                                          hygicell
                                          last edited by

                                          @tig said:

                                          Please don't start removing files willy-nilly.
                                          Only the the files inside the subfolders that have equivalents wrongly installed in Plugins are to be removed - it's recommended that these put into a 'disabled folder' [erasing them is a little drastic - especially when you are not sure what you are doing - at least that way they can be moved back if you've messed up !]. There will also be .rb files in Plugins installed by other tools that you still need! AND of course there are .rb files installed as 'loaders' to run files inside subfolders that come in the zip file 'loose' rather than in a subfolder of Plugins...

                                          If you are getting similar error messages then are you sure the files and files in relative subfolders are installed properly. I noticed that you have a drive with an unusual path - H:/programmas/google/Google SketchUp 8/Plugins/ - the default is something like C:/Program Files/Google/Google SketchUp 8/Plugins/
                                          Please type this in the Ruby Console + <enter> and post the results $LOAD_PATH
                                          It should include your H: folder Plugins path.
                                          With Vista/Win7 there can be a 'Compatibility Files' issue [ยฟArchivos de Compatibilidad?]... which happens if you don't have full security permissions to read/write/etc to the the Plugins folder and/or its subfolders and/or files. It looks like you have done it OK, and there are no error messages... but really the OS has put the new things in a separate subfolder to protect you from yourself! In these cases there's a 'Compatibility Files' button added to the top of the window of the affect folder[s] - you click on that to see what's messed up... Fix your permissions under properties, security as an admin...

                                          Can you post a screen-shot showing your Plugins folder structure etc if none of this is working...

                                          I have installed Sketchup 8 pro on an external disk so I can easily take it with me
                                          my other plugins work fine

                                          ? Only the the files inside the subfolders that have equivalents wrongly installed in Plugins are to be removed ?
                                          would it not be the other way round?
                                          I removed the equivalents in the plugins folder and left the ones in the subfolders

                                          H;\programmas\google\Google SketchUp 8\Plugins\
                                          2DTools\
                                          AutoCenterPoint\
                                          clf_simple_loft\
                                          ctsMaker\
                                          CURVILOFT_Dir_11\
                                          DEFPARAM_Dir\
                                          Dom_brevenchatij\
                                          DoorTools\
                                          DWGExport\
                                          Examples\
                                          FREDOSCALE_Dir_21\
                                          FREESCALE_Dir_10\
                                          GHOSTCOMP_Dir_10\
                                          HOVERSELECT_Dir_11\
                                          JPP_Dir\
                                          JPP_Dir_15\
                                          Layer Manager\
                                          layers\
                                          ldd\
                                          LIBFREDO6_Dir_37\
                                          Ocean\
                                          Projection\
                                          RDE_Dir\
                                          ROUNDCORNER_Dir_23\
                                          ruby\
                                          skin\
                                          SoapSkinBubble\
                                          TIGtools\
                                          TOS_Dir_18\
                                          TT_Lib2\
                                          Utilities\
                                          WindowTools\
                                          0.skb
                                          1.skb
                                          2.skb
                                          2D#.rb
                                          3.skb
                                          AddVertex+.rb
                                          Align User Guide.pdf
                                          align_2D.rb
                                          align_tool.rb
                                          AllowDWGImportInSketchUp7.msi
                                          arc_centerpoint.rb
                                          auto_centerpoint.rb
                                          Big_32.png
                                          BzRoundEdge.rb
                                          cadspan.rbs
                                          calc.rb
                                          CenterPoint.rb
                                          Chamfer_Along_Path.rb
                                          clf_color_by_slope.rb
                                          clf_simple_loft_loader.rb
                                          closeopens.rb
                                          closeopens_icon.png
                                          Cloud Quick Tutorial.pdf
                                          Cloud V6.pdf
                                          cloud_v6.rb
                                          co_tool.html
                                          co_toola.rb
                                          ComponentReporter+.rb
                                          config-thumb.jpg
                                          ConstructFaceNormal.rb
                                          curve_maker.rb
                                          curvestitcher.rb
                                          deBabelizer.rb
                                          delauney2.rb
                                          demeter-main.rbs
                                          DoorTool.txt
                                          DoorTools.rb
                                          DWGExport.rbs
                                          engineeringtoolbox.rb
                                          examp_les.rb
                                          example.dat
                                          examples.rb
                                          extrudeEdgesByEdges.rb
                                          f2f.rb
                                          f2f_cursor.gif
                                          faceFlattener019.rb
                                          file.php
                                          FilletTool.rb
                                          fixSolid.rb
                                          flightpathtool.rb
                                          GetCentroid.rb
                                          GetDimensions.rb
                                          hide_faces_edges.rb
                                          hideall.htm
                                          hidetool.rb
                                          jf_follow_this.rb
                                          jf_spheretool.rb
                                          jointpushpull.rb
                                          kml_mesh_exporter.rb
                                          ky_Delete_Interior_Faces.rb
                                          ky_Group_PushPull_2DFaces.rb
                                          Layer Manager v6.pdf
                                          layer_manager_extension_v5.rb
                                          layer_manager_extension_v6.rb
                                          Layer_manager_install.jpg
                                          layer_manager_v5.txt
                                          layerbymaterial.rb
                                          layers.rb
                                          layers_materials.rb
                                          layers_show_hide_all.rb
                                          ldd.rbs
                                          LibFredo6.rb
                                          LibTraductor.def
                                          LibTraductor.rb
                                          Lines2Components.rb
                                          load_sketchapps.rb
                                          lsystem.rb
                                          makefaces(2).rb
                                          makefaces.rb
                                          makeNamedGroup.rb
                                          manifold.rb
                                          massmaterialimporter.rb
                                          Mirror_31.rb
                                          move_to_origin.rb
                                          move_to_origin_and_center.rb
                                          moveit.rb
                                          new.txt
                                          nudge.rb
                                          numbered_grid.rb
                                          ocean_extension.rb
                                          Organizer.rb
                                          organizerEdit.log
                                          pageLayers.rb
                                          Paint_back_faces v2.0.rb
                                          parking.rb
                                          pathcopy.rb
                                          perp_line_plane.rb
                                          PipeAlongPath.rb
                                          plugins_help.rb
                                          plugins_help_TIG.rb
                                          pnts2mesh.rb
                                          points_cloud_triangulation.rb
                                          ProgressBar.rb.htm
                                          Projection Documentation.pdf
                                          Projection.pdf
                                          projection_extension.rb
                                          PurgeAll.rb
                                          push_pull_vector.rb
                                          PutOnLayer_bmw.rb
                                          PutOnLayer_ForPublicRelease.rb
                                          rci.png
                                          read_me.txt
                                          reglue.rb
                                          rename_comp_inst.rb
                                          repaint_face.rb
                                          repair_broken_lines.rb
                                          Roof.rb
                                          roofplanfollower.rb
                                          rot90.rb
                                          rps_texturewrite.rb
                                          scene_rename.rb
                                          sceneExporter.rb
                                          screw_21.rb
                                          script_loader.rb
                                          SectionCutFace.rb
                                          simplify.rb
                                          SimplifyContours.rb
                                          skin.rb
                                          Small_16.png
                                          SmustardOrganizerExcludeFolders.txt
                                          SoapSkinBubbleTools.rb
                                          Srub.rb
                                          stair_maker062.rb
                                          stitcher.rb
                                          stock_maker.rb
                                          stray_lines.rb
                                          sublend.rb
                                          taper_maker.rb
                                          Terrain Reshaper User guide.pdf
                                          terrain_reshaper.rb
                                          TextTag14.rb
                                          tf.rb
                                          toolbar.rb
                                          trim_extend.rb
                                          tt_cleanup.rb
                                          tt_solid_inspector.rb
                                          unfoldtool.png
                                          unfoldtool.rb
                                          unhide_all.htm
                                          unhide_all.rb
                                          utilities.rb
                                          utilities_10.rb
                                          vector.flat_angle.rb
                                          viewMemory.rb
                                          VolumeCalculator21.rb
                                          weld.rb
                                          Win32API.so
                                          WindowTools.rb
                                          ZLoader__OnSurface.rb
                                          zone.rb
                                          zoom_selection.rb
                                          Zorro.rb
                                          
                                          1 Reply Last reply Reply Quote 0
                                          • jeff hammondJ Offline
                                            jeff hammond
                                            last edited by

                                            @hygicell said:

                                            my other plugins work fine

                                            WindowTools.rb
                                            ZLoader__OnSurface.rb
                                            zone.rb

                                            according to that list, all your other plugins aren't working fine..

                                            you're missing the ZLoader files that come with many of fredo's plugins.. the only one you have is tools on surface but i suspect your round corner, curviloft, and fredoscale aren't working either (amongst others?)

                                            screen 2011-06-25 at 10.54.52 AM.jpg

                                            dotdotdot

                                            1 Reply Last reply Reply Quote 0
                                            • 1
                                            • 2
                                            • 22
                                            • 23
                                            • 24
                                            • 25
                                            • 26
                                            • 65
                                            • 66
                                            • 24 / 66
                                            • First post
                                              Last post
                                            Buy SketchPlus
                                            Buy SUbD
                                            Buy WrapR
                                            Buy eBook
                                            Buy Modelur
                                            Buy Vertex Tools
                                            Buy SketchCuisine
                                            Buy FormFonts

                                            Advertisement