Wow... it sounds really promising! Thank you for developing it!

@tig said:

You now have the option to 'Glue' the section-cut-face to the Section-Plane, so it changes with adjustments to the plane/model-geometry etc...

That´s amazing. Thanks so much for adding this long awaited new feature.
That turns Skp 8 into a completly new version!

@jolran said:

If I'm not misstaken one have to draw the fill-shapes oneself. It would be helpful if hatching was a separate tool detecting boundaries(like a face) but that might be to much to ask for. (one can explode stuff, but.... )

Given that, it is still much faster to texture all faces(from a TIG sectioncutface for ex) in Sketchup and import that into Layout instead of drawing new shapes and pattern them.

Just my point of view.. I'm happy Layout getting some attention in this update.

That´s also my point of view and that of many architects out here.
It´s an incredible waste of time drawing point by boint the hatch over the walls in LO. Let´s just think about how much time it takes for a complex Plan, I don´t even dare think if in the same Plan constant changes occur... Nonsense!

TIG Sectioncutface still do the job better and quicker!

It looks very very promising!
Zaha Hadid's architecture cuold no longer be a mirage in Sketchup with such a plugin!
Congratulation.
Keep working on it

Sie brauchen nur die Pixel des exportierenden Bild zu erhöhen. Sehen Sie unter Optionen in das Exportfenster

I'd just love to see in the next release two very time saving improvements:

1. LIVE SOLID TOOLS:
   As I've already suggested here http://forums.sketchucation.com/viewtopic.php?f=15&t=22286&start=45 we need some option among the new released Solid Tools that let their operators (intersection, subtraction, union...) to be done "live", without losing component's identity. Somethig like what already happens with the cut opening's option within the components: As long as the component is stiched to a face it cuts a hole in it, then when the component is removed the hole disappear. Easy and terribly useful

2. INTELLIGENT TAG SYSTEM:
   Expecially for architects, retriving tags from elements such doors, windows, rooms is extremaly important. Sketchup hasn't yet such a powerful tool. Yes, of course there is LO where you can finalize your drawing with all annotations and tags. But you have to do it manually and in some cases that means wasting tones of time. And if you then have to do some changes to your model? what happened to the already placed Layout tags? You need to remake and replace them completely. What about of an intelligent tag system instead? I love the dimensioning system of Sketchup. You pick the first point, then the second and your dymension automatically updates if a change in these two anchor points happens. Great! So you don't fear that if some change in the model occur you have to redimension your model entirely again. You focus only on the modeling! That's what a tag system should try to achive too. You pick a reference to the geometry in your model, then you freely place a tag linked with that reference and it updates automatically if any change should occur. This could be very useful for tagging doors and windows: you pick 2 reference points for the lenght and place a tag, then other 2 for the height and place the second tag. Than you make a component out of the window and the tags so that if the window changes, its tag changes automatically too. That would come in handy also for tagging window/floor surface ratios, voulume of rooms, length and surface of archs and vaults.

One example can explain better of thousand words how this two ideas combined together could benefit in terms of time saving.
Let's assume to create 5 windows in a wall. I create a window dynamic component with a couple of editable parameters such as height, lenght, number of frames and mullions... In the same component I put also the two tags for the lenght and the height of the window (as I explained above). Finally I assign to the component the propriety to "live" subtract solids. Than I copy the component 4x and that'all.
Any change in my dynamic component would immediatly affect the tag system and the "dynamic" subtract system of the "Live solid tools".

I made a video trying to explain better what I mean. In this movie in which I used the Gaieus trick of duble nested cutting components remains however the problem of creating a hole in the back face of the wall without having to explode the dynamic component and losing therefore its editable references. That could be solved introducing some kind of "Live solid tools"!

[flash=853,560:3mpqavwd]http://www.youtube.com/v/K6go40GGl68&hd=1&fs=1[/flash:3mpqavwd]

@unknownuser said:

Even if Layout has a better dimensionning tool I still prefer the Sketchup dimensionning because of the update referencing feature.

Me too!

As regards your question I haven't had such problems with the size of the dimension lines.
And even if they have by default the same thickness of them in the model, you can just select them and change their lineweight in the shapestyle palette.
That's all.
I attached a png in which you can see the different lineweights between the elements.

It's strange that some elements such as ellipses, rectangles and texts when rotated remember the inclination of the knob from the original position while other elements like paths and groups don't. I done some labels for tagging doors and windows in a LO sheet.
That labels were groups composed of a straight line and some text. When I tryied to align them perpendicular to the openings in a oblique wall I losed any reference because the knob reseted everytime horizontaly. It was a pain trying to allign them perpendicular "by eye". I fear there are no workarounds to this problem as I surfed the web finding no advices abouth that issue. Can you help me?

Yes! It works
Thank you very much Gaieus!!!

Some time ago I did a couple of dynamic components (in SU7) which had the "glue" option checked.
And when I sampled them from SU7 component browser everything worked like I aspected = they stayied sticked to the cursor and changed their orientation according to the plane where I wanted them to be glued.

[attachment=1:j30eifr8]<!-- ia1 -->Component's glue option in SU7.jpg<!-- ia1 -->[/attachment:j30eifr8]

[attachment=0:j30eifr8]<!-- ia0 -->Component's glue option in SU7 .jpg<!-- ia0 -->[/attachment:j30eifr8]

Surprisingly in SU8 this doesn't happen anymore. When I click on the file in my component browser the component appear suddenly in the model space in the position and orientation of the original component file. So I cannot place it where I want...

Any suggestions?