me the same. still searching for saturation option in vray 3. color bleed is everywhere when i dont have the option.

ps: i dont want to edit the option in material option. its to much.

kay. i copy from the model and rotate and copy manually. thanx.
1001 and roof tool cant adding detail like in picture.

any subtitute free plugin?

Hi all
happy new year 2015
i wanna ask bout plugin
what plugin can be use, to make this roof model.
thanx before

the model is from here
http://www.sketchuptexture.com/2014/10/free-sketchup-model-modern-villa-29-vray-visopt.html

@fredo6 said:

@frankflafy

The error on <model>.entityID is very strange because in Sketchup this is valid (it returns "Model".

Do you get this error for a sepcific model or always?

Fredo

@tt_su said:

Actually, this is Dynamic Component that adds that to the Model class. It adds a few methods to make the Model class blend with the regular Entity class.
The changes DC do to the SketchUp API classes makes sense - but unfortunately they where added as part of DC and not the API. So if DC is disabled they won't work.
I personally want them merged into the official API - though there are challenges as some of them are not ideal for the API, as they have some failing edge cases that was good enough for DC, but not for an API. Need to be careful to reduce breaking things. Hence it's not been done yet.

its fixed after i enabled the DC.
yes i disable the DC because of never used it. thanx for the respond.

Does it load properly ? Yes it load properly
Have you read and understood its usage/instructions ? i understand the usage, in older version of SU i used it everyday.
Are there any error messages in the Ruby Console when you try to use it ?
Have you installed the latest LibFredo ? I installed latest and restarted my SU.
I have delete the lib and reinstall. but it dont help.

-and yes, this is the error i found on my ruby console-

This when i load the plugin

Error; #<NoMethodError; undefined method `entityID' for #<Sketchup;;Model;0x9ee8468 @cache_file_name=nil>>
C;/Users/Foxy/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Fredo6_!LibFredo6/body_Lib6FacePicker.rb;791;in `selection_add_remove_faces'
C;/Users/Foxy/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Fredo6_!LibFredo6/body_Lib6FacePicker.rb;731;in `selection_initial'
C;/Users/Foxy/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Fredo6_JointPushPull/JointPushPullTool.rb;565;in `handle_initial_selection'
C;/Users/Foxy/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Fredo6_JointPushPull/JointPushPullTool.rb;514;in `activate'
C;/Users/Foxy/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Fredo6_JointPushPull/JointPushPullTool.rb;64;in `select_tool'
C;/Users/Foxy/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Fredo6_JointPushPull/JointPushPullTool.rb;64;in `action__mapping'
C;/Users/Foxy/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Fredo6_!LibFredo6/Lib6Plugin.rb;133;in `call'
C;/Users/Foxy/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Fredo6_!LibFredo6/Lib6Plugin.rb;133;in `launch_action'
C;/Users/Foxy/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Fredo6_JointPushPull/bootstrap_JointPushPull.rb;81;in `launch_action'
C;/Users/Foxy/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Fredo6_JointPushPull/bootstrap_JointPushPull.rb;128;in `block in declare_command'
C;/Users/Foxy/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Fredo6_!LibFredo6/Lib6Plugin.rb;1080;in `call'
C;/Users/Foxy/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Fredo6_!LibFredo6/Lib6Plugin.rb;1080;in `command_invoke'
C;/Users/Foxy/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Fredo6_!LibFredo6/Lib6Plugin.rb;1062;in `block (2 levels) in build_config_commands'
C;/Users/Foxy/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Fredo6_!LibFredo6/Lib6Traductor.rb;1077;in `call'
C;/Users/Foxy/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Fredo6_!LibFredo6/Lib6Traductor.rb;1077;in `block in add_command'
SketchUp;1;in `call'

This when i select the face

Error; #<NoMethodError; undefined method `entityID' for #<Sketchup;;Model;0x9ee8468 @cache_file_name=nil>>
C;/Users/Foxy/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Fredo6_!LibFredo6/body_Lib6FacePicker.rb;791;in `selection_add_remove_faces'
C;/Users/Foxy/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Fredo6_!LibFredo6/body_Lib6FacePicker.rb;744;in `selection_validate'
C;/Users/Foxy/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Fredo6_!LibFredo6/body_Lib6FacePicker.rb;622;in `selection_validate_if_add'
C;/Users/Foxy/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Fredo6_JointPushPull/JointPushPullTool.rb;676;in `selection_freeze_positions'
C;/Users/Foxy/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Fredo6_JointPushPull/JointPushPullTool.rb;1283;in `onLButtonDown'
Error; #<NoMethodError; undefined method `entityID' for #<Sketchup;;Model;0x9ee8468 @cache_file_name=nil>>
C;/Users/Foxy/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Fredo6_!LibFredo6/body_Lib6FacePicker.rb;791;in `selection_add_remove_faces'
C;/Users/Foxy/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Fredo6_!LibFredo6/body_Lib6FacePicker.rb;744;in `selection_validate'
C;/Users/Foxy/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Fredo6_!LibFredo6/body_Lib6FacePicker.rb;916;in `onLButtonUp'
C;/Users/Foxy/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Fredo6_JointPushPull/JointPushPullTool.rb;1315;in `onLButtonUp'

Please Help.

should i PM him?

is this compatible with sketchup 2015 32 bit? i cant make the plugin select the face.

Vray dome light is like this

hi
thanx for the plug in. really love this.

i have one problem. its Vray dome light
when i ran this with vray dome light on screen, the vray dome light deleted.

how i fix this?

thanx

so no solution yet? ic. thanx

@pbacot said:

It's been discussed, a plugin, for example, to take a edge on a surface and make a trough. Don't think a real quick one step solution is there. There are many plugins that can help though. tubes on path perhaps. Often I have found my doors are all components so I design them to be able to leave a gap between them, but still many occasions I wish I had a plugin as above.

yes we can use component only if the size of doors is all the same.

maybe some of our friend here can help make this simple plugin if there is none. i think its an easy and simple one.

@dave r said:

I have an alternative approach that works well enough for me. Instead of adding a gap between the doors, I just make a Hidden Line export which I overlay on top of the rendered image. the line dividing the doors provides enough of a clue that there are two doors without adding much in the way of additional geometry.

In this example the entire cabinet is drawn as a single "piece" and the doors are just one face on the box. In the render by itself the door panel looks like one piece.

With an overlay which only takes seconds to do, it becomes clear there are two doors.

Even when I draw a fully detailed model, inset doors and drawers are drawn without gaps so the hidden line export does the trick.

how? i cant get what u tell me. thanx

when i make a door of wardrobe or kitchen, i must offset it 0.1-0.2cm and push it down.
so beetwen doors there is a space. and when render i can see the door.

is there a plugin for this? so when i select the door or face, it automaticly offset and push.

thanx

why when
1.i select a line
2.i click and move it with ctrl means copy
3.i put a number , etc 10
4.enter
5.it not move or doing anything at all.
6.i reenter 10. enter
7.and it move 10 point.

why i must double entry to copy a line?

sorry i just copy paste old plugins to a new plugins folder. and i got screwed.
but it fixed. thanx community.

is it compatible with su2014? im trying and still get error.