sketchucation logo sketchucation
    • 登入
    ℹ️ Licensed Extensions | FredoBatch, ElevationProfile, FredoSketch, LayOps, MatSim and Pic2Shape will require license from Sept 1st More Info

    SubD examples and models

    已排程 已置頂 已鎖定 已移動 SUbD
    renderpluginsextensions
    1.7k 貼文 81 Posters 952.0k 瀏覽 79 Watching
    正在載入更多貼文
    • 從舊到新
    • 從新到舊
    • 最多點贊
    回覆
    • 在新貼文中回覆
    登入後回覆
    此主題已被刪除。只有擁有主題管理權限的使用者可以查看。
    • Rich O BrienR 離線
      Rich O Brien Moderator
      最後由 編輯

      🤤 flawless

      Download the free D'oh Book for SketchUp 📖

      panixiaP 1 條回覆 最後回覆 回覆 引用 1
      • panixiaP 離線
        panixia @Rich O Brien
        最後由 編輯

        @Rich-O-Brien flowify is the key for this sort of stuff..

        1 條回覆 最後回覆 回覆 引用 0
        • Mike AmosM 離線
          Mike Amos
          最後由 編輯

          It would help to see the workflow for that last especially, if/when you have time.

          panixiaP 1 條回覆 最後回覆 回覆 引用 0
          • panixiaP 離線
            panixia @Mike Amos
            最後由 panixia 編輯

            @Mike-Amos well, in this case i started with a basic trace of photo references, I use components, so that I can use different photos for different pieces but then the components are nested in the main assembly so they end up in the right place..

            d95b62c9-46ac-4799-b803-3d2f5b9eec03-image.png

            They also gave me a pretty bad photoscan, so I used that just to intersect it with a plane and extract the basic profile of the seating.
            I then smoothed the extracted curve with Curvizard and normalized it with Polyline Segmentor

            b0a8cfe7-430a-46ea-be84-f722c9fe33e0-image.png

            Then I created a base grid for the pattern with the proper real world measurements.

            bbe40d2d-2546-41c5-84e0-e72b59566502-image.png

            I then created a repeated component with Curviloft Skin

            d8ca9777-62a2-48b7-9321-78e84b768235-image.png

            Same for the buttons

            bc98b8fa-e31a-4008-aa98-4c705304643b-image.png

            And then create a different variation of that component for the sides

            5367f69e-59b7-4d1f-b9a4-91d2dbf7e969-image.png

            And another variation for the corners

            ce4afeb1-b3c7-4ae6-bb19-eae2bd1c9fef-image.png

            then I joined all of them together.. please notice that In this stage I try to keep the quads as even as possible, because I'm gonna deform this stuff

            f6d3a48c-76b9-4d65-bbcc-4428b46805e4-image.png

            Then I extracted the diagonals for the sewing and used "Lines to Tubes" with quite low poly geometry.. and of course I did some cleanup with quadface tools for the overlapping geometry which will not be seen.

            6651b280-99e4-4498-8ecc-899c48eb69f5-image.png

            I then created the base shape of the seating using Curviloft ad Quadface tools.. and extracted the grid were I need the upolstered thing..

            c7dd30da-e331-4c23-9c4c-0ae23a450692-image.png

            Then I use the QuadfaceTools "Unwrap Grid" feature to extract a flat grid from that.. which has the exact same lenght and topology of the seating that I'm going to replace.. and here is the flowify rig setup that I used to send the geometry to the curved surface.

            WARNING: you need to use "flowify without cuts" to avoid messy topolgy and keep quads.

            fe9a8352-1ae8-4f2a-84cf-3abc81f10a84-image.png

            From this stage, it was just a matter of stitching and tweaking.. with the usual VertexTools, QFT, Artisan shenanigans

            4d18852f-b09c-427e-90ca-880c94cb269a-image.png

            Meanwhile I also added the studs.. I used profile builder assembly to place them and then manually repositioned some bits in the problematic areas

            5cfc4487-b562-441f-90fd-3fa3a5a0c0aa-image.png

            And this is the updated version with the studs..
            I hope this was helpful to better understand the process..

            It's a bit different every time.. the shoe and the skatepark used a quite different process.. and the other sofas I posted before of that, is another different story.. 😬

            a70452d9-4580-4570-b236-6f55f314d6f7-image.png

            4dc1ce46-dc95-4fd2-9c11-ab469335bf04-image.png

            1 條回覆 最後回覆 回覆 引用 4
            • HornOxxH 離線
              HornOxx
              最後由 編輯

              A Great work! – & thanks for the many pictures of the doing process.

              never trust a skinny cook

              1 條回覆 最後回覆 回覆 引用 2
              • Mike AmosM 離線
                Mike Amos
                最後由 編輯

                Agreed, a great resource. Thanks very much for that.

                1 條回覆 最後回覆 回覆 引用 1
                • panixiaP 離線
                  panixia
                  最後由 編輯

                  I improved the upper stitching (which was too hard compared to the reference) with Vertex tools and the upper part of the tuft (which was too thin) using Artisan2 FFD (with a couple of tricks to make it work on multiple subgroups).
                  I also increased the rounding of the frame profile using Artisan Move tool "normal" constraint.
                  I think I'm done with this one.
                  Time to unwrap it 😧

                  image.png

                  76e856a9-42a0-49d9-98a9-faec6becf6bd-image.png

                  0131ea2d-e656-4a55-b9a4-2b41cd4d16c0-image.png

                  ccd066ed-7b8d-49b2-bbfd-6ec277282246-image.png

                  Rich O BrienR 1 條回覆 最後回覆 回覆 引用 1
                  • panixiaP 離線
                    panixia
                    最後由 編輯

                    "Work smarter not harder" 😁
                    Another WIP from the same vintage furniture job, leveraging the power of components..
                    Most of the armchair details are reusable for the sofa.

                    984a9095-d2ef-4270-a920-1e66f453da9e-image.png

                    1 條回覆 最後回覆 回覆 引用 2
                    • alvisA 離線
                      alvis
                      最後由 編輯

                      It's nice to see an orderly work process. And it seems like I'm already losing my position.

                      panixiaP 1 條回覆 最後回覆 回覆 引用 1
                      • panixiaP 離線
                        panixia @alvis
                        最後由 編輯

                        @alvis said in SubD examples and models:

                        it seems like I'm already losing my position

                        Your work has always been a source of great inspiration and will always be.

                        1 條回覆 最後回覆 回覆 引用 1
                        • panixiaP 離線
                          panixia
                          最後由 編輯

                          I did some progress with this couple of models.. 🤗

                          b43ceabd-36f1-408b-8bf9-862683b3cb18-image.png

                          071e29e0-56eb-4b23-8331-f5c9f2e284af-image.png

                          8021c87e-b984-4715-b0fb-571287f5a6df-image.png

                          b9a3cbd6-9e46-4190-8b6f-b6f98aee484b-image.png

                          a2ac956e-638d-4efa-b301-231708b1854e-image.png

                          64d2ba48-846f-491f-9ce1-7c98981cb723-image.png

                          1 條回覆 最後回覆 回覆 引用 1
                          • Rich O BrienR 離線
                            Rich O Brien Moderator @panixia
                            最後由 編輯

                            @panixia said in SubD examples and models:

                            Time to unwrap it

                            I'll say a prayer 🙏

                            Download the free D'oh Book for SketchUp 📖

                            panixiaP 1 條回覆 最後回覆 回覆 引用 1
                            • panixiaP 離線
                              panixia @Rich O Brien
                              最後由 編輯

                              @Rich-O-Brien LOL 😂

                              I plan to unwrap separate meshes at mid poly stage and keep them consistent with the "tile trick"
                              then I'll do the final SubD

                              1 條回覆 最後回覆 回覆 引用 0
                              • 1
                              • 2
                              • 79
                              • 80
                              • 81
                              • 82
                              • 83
                              • 83 / 83
                              • 第一個貼文
                                最後的貼文
                              Buy SketchPlus
                              Buy SUbD
                              Buy WrapR
                              Buy eBook
                              Buy Modelur
                              Buy Vertex Tools
                              Buy SketchCuisine
                              Buy FormFonts

                              Advertisement