SketchUp 2015 is 64bit
-
Dave you're always a font of good advice, one might even say you are full of it.
-
-
@hellnbak said:
Don't know if SU2015 will be a big success or another Windows 8, but at least it is breathing new life and an air of excitement back into the forums.
And after the (IMO) lackluster attempts at taking SU forward with R13 and 14, my fears for Sketchup's future after Trimble are now somewhat laid to rest.
They seem to be getting serious about making changes that really matter.
Kudos, Trimble
We're just getting warmed up!
It takes time to turn a big boat around. 
-
-
Hi - Any advice on whether V-Ray 2.0 is compatible with 2015? Want to make sure before I upgrade and wipe out our rendering capability!
-
so, finally... 64bit. Thanks!
And if the slow exploding/importing is really improved, this is even better!
And the PhotoMatch upgrade looks very useful
http://help.sketchup.com/en/article/3000075
http://help.sketchup.com/en/article/1004436
Is this working with manually imported photos or only with images imported via special Trimble software?Concerning the new license system... so it is possible to install v8 and 2015 side by side and i'm not loosing my v8 license, right?
(the new arc and rectangle tools are nice to have but not really worth mentioning i think, the same applies to the fast styles - i suppose it will not be faster than simple lines...)
-
@numerobis said:
Concerning the new license system... so it is possible to install v8 and 2015 side by side and i'm not loosing my v8 license, right?
It's exactly the same as it's always been. You can have multiple versions installed and one license doesn't affect the other. They are entirely separate installations. And in case you haven't seen this before: Do not simply copy plugins from your old SU8 installation to SU2015. It's been repeat ad nauseum for most of the last year so you should have seen it by now.
-
@meanmrmustard85 said:
Hi - Any advice on whether V-Ray 2.0 is compatible with 2015? Want to make sure before I upgrade and wipe out our rendering capability!
Might be worth getting in touch with the V-ray people and get the information from the source.
-
The only downside I can see at the moment is that we now have 64 bit but I cannot think of a thing to do with it. No rendering for some time I reckon but at least I can get the modelling done in preparation. I just hope it is not too long for renders to begin.
-
@dave r said:
It's exactly the same as it's always been. You can have multiple versions installed and one license doesn't affect the other. They are entirely separate installations.
Thanks!
-
@dave r said:
@meanmrmustard85 said:
Hi - Any advice on whether V-Ray 2.0 is compatible with 2015? Want to make sure before I upgrade and wipe out our rendering capability!
Might be worth getting in touch with the V-ray people and get the information from the source.
And as has been pointed out, you can run both side by side. Which means even if Vray doesn't yet work with 2015 you can still model in it and render in 2014.
-
Congratulations SU team. This is a huge advancement for SketchUp. I was getting so frustrated with the software but now it's onwards and upwards I guess.
-
Guess you have to go get it 'manually'?
-
@olishea said:
Congratulations SU team. This is a huge advancement for SketchUp. I was getting so frustrated with the software but now it's onwards and upwards I guess.
+1
-
@bmike said:
Guess you have to go get it 'manually'?
Not sure you'll get a message from the "Update" as this is an "UpGrade"...
-
@bmike said:
Guess you have to go get it 'manually'?
[attachment=0:3g8mdq0x]<!-- ia0 -->Screen Shot 2014-11-04 at 10.06.20 AM.png<!-- ia0 -->[/attachment:3g8mdq0x]
Yes, for the moment. We typically wait a day or two to make sure everything is running smoothly before turning on the update service in previous versions.
-
@box said:
@dave r said:
@meanmrmustard85 said:
Hi - Any advice on whether V-Ray 2.0 is compatible with 2015? Want to make sure before I upgrade and wipe out our rendering capability!
Might be worth getting in touch with the V-ray people and get the information from the source.
And as has been pointed out, you can run both side by side. Which means even if Vray doesn't yet work with 2015 you can still model in it and render in 2014.
Thanks, that makes sense.
Spoke to Chaosgroup and they're working on a free update for release as soon as possible.
-
@meanmrmustard85 said:
Hi - Any advice on whether V-Ray 2.0 is compatible with 2015? Want to make sure before I upgrade and wipe out our rendering capability!
I think it has to be recompiled to 64 bit. At least the Maxwell plugin needs an update...
-
The SketchUp description of 64 bit says: "The exception to this 32-bit status is that SketchUp for Windows has been built with an exception to allow 64-bit memory usage which allows SketchUp to use more than 4 Gb of RAM."
http://help.sketchup.com/en/article/3000069
DO you think the second use of the word exception is a mistake, or do you think SketchUp found a way to create a "pseudo" 64-bit - which uses more memory, but isn't really recompiled for 64 bits?
Al Hart
IRender nXt from Render Plus -
@Al, if you read the prominent notice at the top of the page...
NOTICE: SketchUp 2015 is here! When you look at this Knowledge Center article, be sure to pick "SketchUp 2015" from the red box above to see the 2015 version of that content. If there is no version picker, this content applies to all versions of SketchUp.I think you will find your looking at v2014...
john
Advertisement