[Plugin] TIG-Smart_offset

[jeff hammond]

@tig said:

To check that the toolbar WILL work somehow... can you please edit the file 'TIG-Smart_offset.rb' on your MAC with a plain text editor [BBedit???] and find the three lines starting at #117 reading:

		cmd.set_validation_proc{
> 			Sketchup.active_model.selection.grep(Sketchup;;Face)[0] ? MF_ENABLED ; MF_GRAYED
> 		}

and change them to read

		#cmd.set_validation_proc{
> 			#Sketchup.active_model.selection.grep(Sketchup;;Face)[0] ? MF_ENABLED ; MF_GRAYED
> 		#}

i.e. add a # in front of each of the three lines to disable them.

that does the trick.. the toolbar is always active now and i'll just receive an error if i try to run the tool without an appropriate selection..

[context menu works also.. but it worked prior to disabling the above lines]

[TIG]

OK !
The current tool [v1.3] works just fine for PCs... but it baulks on a MAC with some of the enable/grayed code for the toolbar button - which is weird...

The editing of the three lines of code in the script to disable them with a leading #... as indicated in the preceding posts... will fix it for MAC users...

I'll see if I can get a version working properly for PC and MAC without this cludge !

In the meantime, please report any issues...

Merry Xmas
Apocalypse averted!
Phew!

[simon le bon]

Thank you for this one really "smart" dear TIG +++
We were used to the quirks of the native offset tool as a fatality. It is a surprise to realize that it was not the case

Merry Christmas to you too

Simon

[driven]

@tig said:

I'll see if I can get a version working properly for PC and MAC without this cludge !

I posted this on the first page and it will work on both?
set validation doesn't seem to work on macs on Toolbars

cmd2=UI;;Command.new('TIG.Smart_offset'){self.dialog()}
cmd2.small_icon=File.join(dir, 'TIG-Smart_offset.png')
cmd2.large_icon=File.join(dir, 'TIG-Smart_offset.png')
toolbar=UI;;Toolbar.new('TIG.Smart_offset')
toolbar.add_item(cmd2)

john

[TIG]

Here's v1.4 http://sketchucation.com/forums/viewtopic.php?p=446462#p446462
It now only applies toolbar enabled/grayed [validation] on PCs; on a MAC the toolbar button is always enabled, but when you attempt to use it without a suitable preselection there's an error-messagebox...
This now means PC and MAC users should have a quite similar usage

[DareDevil]

Thanks for this advanced tool ! Nice to solve round edge offset.

But I have a two requests :
First, (crossing post with Pilou ) I think when the offset cross itself, there is a chance it make a hole. Your Smart Offset fill all the shape. It will be cool if your toll can solve this case.

The second is a bonus setting to create a round offset like this :
I don't know if it's "easy" to make this kind of function, perhaps crossing your offset tool and your Chamfer tool from 2D Tools.

[pilou]

From Daredevil
Original
Smart_Offest
Normal result wished

[TIG]

DareDevil/Pilou

I had been following your discussions about this in the French forum...
I know what you are asking for, but it is very complicated to come up with an algorithm to remove the 'hole' - it's easy for us to 'see' what's to go and what's to stay, but in code it is very complicated to ensure that the unwanted parts are removed.
If anyone has any ideas [even seemingly silly ones?] I am open to suggestions...

On the 'rounded corner' matter... This effectively a 'multi-fillet' tool.
The main issue I see in you'd need to select just the edges to fillet and not a face, otherwise in the case you illustrated the already curved part would potentially get 'multi-filleted'...

That's x6 clicks to select the ones needed with a new tool - or x2 to select face & its-edges, then x2+Ctrl+Shift to remove the face and the unwanted arc [or +x1 click to make a fence, e.g. for an 'arc' made from exploded edges...] - say x4 or x5...
OR using the existing 2dFillet tool x2 per vertex = x10 clicks.
But are your few extra clicks worth my lost brain-cells needed to contrive this wonder ?

[pilou]

For the multi fillet
Surely not but don't forget the pleasure to find the solution!

[numerobis]

WOW!!! This is really helpful! Great! Thank you very much!!!
And Merry Christmas to you too!

[takesh h]

"Smart TIG" offsets indeed!

[jeff hammond]

@unknownuser said:

For the multi fillet
Surely not but don't forget the pleasure to find the solution!

that pleasure would be nothing compared to the pleasure experienced by figuring this one out

[rv1974]

TIG, marry Xmas and thank you for this great present.
P.S. Could you take a look at attached?
P.P.S. a. It'd be neat if this tool was mode-less (I mean replicating the native SU behavior)
b. a number of offset option???

---

some segments offset wrong way

[jolran]

Thank you TIG and Merry Christmas!

This one is a difficult task.

[JClements]

Thank you, Santa TIG. Milk and cookies will await you Xmas morning.

Any chance of having:
1- a "Weld Offset" option button in the dialog
or
2- have the offset automatically welded if its source-edges were made from the circle, arch, polygon tools or previously "welded" edges?

Regards, John

[matt.gordon320]

Thanks TIG! I don't think I could have asked for a better Christmas/World not ending present!

[Pixero]

Thanks for this great plugin.
Would it be very difficult to have it work as an interactive tool also using the measurement toolbar instead of the pop up window so it can replace the native tool all together?

[TIG]

Here's v1.5 http://sketchucation.com/forums/viewtopic.php?p=446462#p446462
There's some code improvements and fewer fails etc.
Some of the requested changes like 'holes', welded-outlines and VCB input will have to wait...

Merry Xmas...

[fredo6]

@pixero said:

Thanks for this great plugin.
Would it be very difficult to have it work as an interactive tool also using the measurement toolbar instead of the pop up window so it can replace the native tool all together?

Pixero,

Then you can use Offset on Surfacewhich shows interactively the offset profile and allow to type the offset distance in the VCB. Still many glitches with convoluted contours however.

Fredo

[blajnov]

Excess loop ...

---