[Plugin] BezierSpline - v2.2a - 22 Apr 21
-
I used Bonzai3d to do it .
thanks a lothsjzyangbin
-
wish to have a visual interface control nodes of the function like YAD
here is an example:best regards
-
@hsjzyangbin said:
wish to have a visual interface control nodes of the function like YAD
here is an example:About visual interface control nodes... Something like this is possible? (Like most 2d Vector software)
"A quadratic Bézier curve has a start and an end point (blue dots) and just one control point (red dot) while a cubic Bézier curve uses two control points."Daniel S
-
@daniel s said:
@hsjzyangbin said:
wish to have a visual interface control nodes of the function like YAD
here is an example:About visual interface control nodes... Something like this is possible? (Like most 2d Vector software)
[attachment=1:21zf7cs5]<!-- ia1 -->simulation.gif<!-- ia1 -->[/attachment:21zf7cs5][attachment=2:21zf7cs5]<!-- ia2 -->bezier.png<!-- ia2 -->[/attachment:21zf7cs5]
"A quadratic Bézier curve has a start and an end point (blue dots) and just one control point (red dot) while a cubic Bézier curve uses two control points."Daniel S
maybe some difference:
visual interface control number of nodes
[flash=][attachment=0:21zf7cs5]<!-- ia0 -->2010-03-18_0456.swf<!-- ia0 -->[/attachment:21zf7cs5][/flash]thank you
-
thank you very much
-
Hi Fredo6,
First of all, thank you very much for this wonderful plugin!
I would like to report a small bug with the "Convert to Catmull Spline" feature. One of the segments is always left out of the conversion.-Kwok
-
@kyyu said:
Hi Fredo6,
First of all, thank you very much for this wonderful plugin!
I would like to report a small bug with the "Convert to Catmull Spline" feature. One of the segments is always left out of the conversion.-Kwok
You need to explictly close the loop, by hitting the Key F9 (or via contextual menu).
Fredo
-
@unknownuser said:
@kyyu said:
Hi Fredo6,
First of all, thank you very much for this wonderful plugin!
I would like to report a small bug with the "Convert to Catmull Spline" feature. One of the segments is always left out of the conversion.-Kwok
You need to explictly close the loop, by hitting the Key F9 (or via contextual menu).
Fredo
Thanks, that worked perfectly!
-Kwok
-
Hi guys I have just downloaded the most recent version. BezierSpline%201.
I have put LibTraductor.rb, BZ_Dir_13, and bezierspline.rb into the plugins folder on my MAC. When I open sketchup I get this error:
Error Loading File #extrusionToolbar.rb
no such file to load -- deBabelizer.rbError Loading File 2D#.rb
no such file to load -- deBabelizer.rbError Loading File extrudeEdgesByEdges.rb
no such file to load -- deBabelizer.rbError Loading File extrudeEdgesByFaces.rb
no such file to load -- deBabelizer.rbError Loading File extrudeEdgesByLathe.rb
no such file to load -- deBabelizer.rbError Loading File extrudeEdgesByRails.rb
no such file to load -- deBabelizer.rbError Loading File extrudeEdgesByVector.rb
no such file to load -- deBabelizer.rbany ideas guys???
Cheers
Steve
-
That's messages related to TIG's tools. you're missing one of his dependant files
deBabelizer.rb. -
Since you must have downloaded both my 2DTools and ExtrusionTools I wonder where you put deBabelizer.rb that comes with both of them ?
Anyway... here's another copy to save you having to find it - put it into the Plugins folder and restart SUp - that error should then be gone...deBabelizer.rb -
Yes you guys are correct. My bad. I thought it out when I was loading Bezierspline.
Thanks for the responses.
S
-
Hi fredo
I work on a mac and I have a really big problem here.
I dont know how can I view the cadfather toolbar on sketchup, I can only see the standard one and I installed all the files in the correct places bezierspline.rb, LibTraductor.rb and BZ_DIR_13 subfolder. I don't even see the option "convert to" when I right click on a bezier line , I need to use the polyline segmentor and courbette. I tried everything...reinstalling sketchup, also removing all the plugins I have from the Library/AplicationSupport/Google Sketchup 7/Sketchup/ plugins folder,but guest what, I still see all the toolbars working perfectly even though the plugin folder is empty.
However, when I work on windows I have no problems, I install the latest bezierspline and it works perfect.... what am I doing wrong?
Thanks for the responses -
Many Thanks Fredo,
Much appreciated, for your Plugin.
Thank you again
have a good day
cheers
inasia
-
@morphing_24 said:
Hi fredo
I work on a mac and I have a really big problem here.
I dont know how can I view the cadfather toolbar on sketchup, I can only see the standard one and I installed all the files in the correct places bezierspline.rb, LibTraductor.rb and BZ_DIR_13 subfolder. I don't even see the option "convert to" when I right click on a bezier line , I need to use the polyline segmentor and courbette. I tried everything...reinstalling sketchup, also removing all the plugins I have from the Library/AplicationSupport/Google Sketchup 7/Sketchup/ plugins folder,but guest what, I still see all the toolbars working perfectly even though the plugin folder is empty.
However, when I work on windows I have no problems, I install the latest bezierspline and it works perfect.... what am I doing wrong?
Thanks for the responsesIf the Library/AplicationSupport/Google Sketchup 7/Sketchup/ plugins folder is empty and you still have BezierSpline working, then you may have something left in the other plugin folder which is under /user/....
Otherwise, maybe some Mac users could help you to troubleshoot, as I don't have a Mac at hand.
Fredo
-
@unknownuser said:
Thank you so much for this fantastic plugin Fredo6. Is there a way to tweak the snap? I'm a little heavy handed with the mouse - it's very easy for the cursor to fall off the line, or to move a line segment instead of a point when editing polylines.
The script relies on the regular Sketchup inferences. So if there is a way to tweak it, then it should be valid for BezierSpline too.
Fredo
-
Thanks for the quick reply Fredo6. It's not in any options that I can see. Perhaps it's something a Ruby script can do. But a cursory search for such a script lead nowhere.
-
Thank you so much for this fantastic plugin Fredo6. Is there a way to tweak the snap? I'm a little heavy handed with the mouse - it's very easy for the cursor to fall off the line, or to move a line segment instead of a point when editing.
-
Mac user here...
The CadFather tools disappeared, I had them working, but after installing the spheretool.rb it they when missing...
-
Dominant XYZ with available?
Advertisement