a small question please!
what is the plugin for "divide edges" you have been using?
once again, thanks a lot!

wow, thank you kindly for your effort!
that´s exactly what i need it!
best of luck!

hi guys,
i have the same problem, but somehow it doesn´t work for me:-(
i do not play with su too often like before, so i ve´forgotten some stuff for sure.
i ´d like to divide two ovals, an each into 8 segments with the same length.
it´s for my teepee project.
any help is very appreciated! thanks

kifaru_teepee.skp

thanks for your excellent and quick help, glad to have you around!

best of luck!

bingooo!

thanks both of you guys, your knowlege is admirable!

is this ruby ( below) another thomthom work?

cheers!

thanks for help,

but i don´t have them installed in su, just a photo

no result with g00gle image search either ٩(͡๏̯͡๏)۶

hi,

could someone please help me to identify these two rubies?

thanks!

i´d be very grateful to be able to export sketchy edges into real vectors,

rather than to export into raster first, than to convert files into vectors with

another external programs.

maybe it´s opportunity for a ruby expert.

thanks!

sure, why not...beer bottle or glass is fine:-) ( ..even non-alcoholic one )

good job Hornxx !

hi,
thanks you guys for your excellent tips and tricks:-)
may i know the ruby alvis has used for a handle please?
keeps working!

hi,
thanks for your excellent plugin!
i´m glad, because it starts working...
i´ve found that it cuts hole through unclosed model, is there any
way how to make it cuts through component or a group please?
wondering, if is there any chance in the future version to make our unique eg.nuts or bolts please? ( something like profile builder ruby )
keep working!

hi,

i was trying to export sketchy edges to eps without success.

would someone be good enough please to share his/her tip on how to do that ?

thank you guys!

hi,

all of you have pretty good results!

and of course, thanks for showing almighty artisan in action.

curviloft ruby is a great tool too.

[highlight=#ffff40:38ntd1ya]anyone who´d like to share his/her model of beer glass is welcomed:-)[/highlight:38ntd1ya]

╔══╗
╚╗╔╝
╔╝(¯v´¯) ╚══.¸.BEER

hi,

wondering, how to Export DWG or DXF LayOut File .

for Layout 8 is great tut here:
http://www.dummies.com/how-to/content/how-to-export-a-dwg-or-dxf-layout-file.html

, but any idea how to do it in version Layout 2015 please?

thanks!

hi,

i ´d like to make a nice beer glass, but i´m stuck with a handle.

could you please someone tell me how to finished it ???

i like to be a nicely curved and round.

thanks!

beer_glass.skp

hi guys,

so incredible plugin with so many troubles

unfortunately, i´ve got an error message too.

is there please any other tool to delete all "old and troublemaking" files?

i´ve already done:

-uninstalling all libfredo plugins with sketchucation tool.

-purged absolete files

-auto installation of libredo plugins with sketchucation plugin store , but get this

nasty message again.

%(#FF0000)[Error Loading File Fredo6_!LibFredo6.rb
Error: #<ArgumentError: invalid byte sequence in UTF-8>
C:/Users/tibet/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Fredo6_!LibFredo6/Lib6Core.rb:716:in `match'
C:/Users/tibet/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Fredo6_!LibFredo6/Lib6Core.rb:716:in `block (2 levels) in load_from_config'
C:/Users/tibet/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Fredo6_!LibFredo6/Lib6Core.rb:715:in `each'
C:/Users/tibet/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Fredo6_!LibFredo6/Lib6Core.rb:715:in `block in load_from_config'
C:/Users/tibet/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Fredo6_!LibFredo6/Lib6Core.rb:713:in `foreach'
C:/Users/tibet/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Fredo6_!LibFredo6/Lib6Core.rb:713:in `load_from_config'
C:/Users/tibet/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Fredo6_!LibFredo6/Lib6Core.rb:1099:in `block in load_all_plugins'
C:/Users/tibet/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Fredo6_!LibFredo6/Lib6Core.rb:1099:in `each'
C:/Users/tibet/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Fredo6_!LibFredo6/Lib6Core.rb:1099:in `load_all_plugins'
C:/Users/tibet/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Fredo6_!LibFredo6/Lib6Core.rb:786:in `load_from_config'
C:/Users/tibet/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Fredo6_!LibFredo6.rb:188:in `startup'
C:/Users/tibet/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Fredo6_!LibFredo6.rb:338:in `module:LibFredo6'
C:/Users/tibet/AppData/Roaming/SketchUp/SketchUp 2015/SketchUp/Plugins/Fredo6_!LibFredo6.rb:34:in `<top (required)>']

any chance to get rid of it please?

thanks !

hi,

thanks for your patience and care.

unfortunately each step is slightly different, due to curved stringers, therefore

the triangular patters will be different on left and right side of the stringers.

i think the stairs are consistent, so i have to try your tip to make one cut-out, and

try duplicating it along sides.

a great idea!

thanks for an honest reply.

i know that´s not easy, but i hope that final technique will be very useful

for other sketchup learners too.

it seems like a simple job, but it´s not ...

hi Gerry, a very nice work.

my goal was to cut/extrude identical triangular openings on both stringers.

, so i´d like to know how to do it more efficiently:)

i´ve done a couple of them, but i´s taken a very long time.

thanks for any inspiration!

hi,
i make stringers with curviloft ruby , i´m sure there must be many better and
easier ways. i like to make triangular patterns on both sides of stringers.
tools on surface ruby is great, but a new one to me.
if i do stringers with straight lines, and fill them with triangular patterns,
and finally curve with shape bender ruby, the patterns might not fit the exact spot.
if there is is better way to do it, please do not hesitate to enlighten me.
thanks!