Salut pilou, C'est vrai que je ne parcours pas souvent la partie ENG donc merci pour cette découverte ! Il risque de m’être utile pour le travail même si pour le moment il manque 2/3 fonction comme celle que souligne Jean-Franco dans le dernier message du topic ENG comme l'impossibilité d'utiliser le plugin si les différents composants sont englobés dans un groupe (il faudrait avoir la possibilité de gérer la hiérarchie d'imbriquement). Ce qui serait top c'est qu'il gère également les cotations, du genre : sur la vue globale les quelques cotes d'ensemble sur les parties séparé la cotation détaillée de chaque pièces avec soyons fou même une vue face, coté, dessus et perspective. Et quand on repasse dans la scène globale les cotes des pièces La on aurait un outil complet et assez utile pour le dessin technique dans SU !

20 July 2012 Beta 3 MAC & PC (more infos in few days) @unknownuser said: Multiple cpu cores used in the draw engine - should speed up the display of complex models on multi-core machines. Please let me know how it benchmarks on your system, you can get a numeric benchmark by turning on the viewport display time which will put up a number in the upper-left corner of the viewport for how long it took to render a frame. You can toggle that on and off by setting up a shortcut key with the following script on it: script: /* Toggle redraw time display */ moi.ui.showViewportDisplayTime = !moi.ui.showViewportDisplayTime; You can compare numbers with that turned on in the previous v3 beta or v2 to the new multi-core enabled release. PDF import has been totally overhauled, it should be a lot more robust and some kinds of PDFs that would previously get garbled should come through ok now. New Extrude to point and Extrude tapered options for the Extrude command (2 new buttons on the Extrude options panel). New Isocurve command under Construct > Curve > Iso, and a new "Isoparm" option for the Trim command when trimming a single surface. [image: AjZo_extrude.jpg] [image: rX2v_iso.jpg]

@unknownuser said: ....The only default is cosmetic : icones are very uggly! :mrgreen: Well, that by itself makes it completely unacceptable for an Architect.>_< Thanks for the update.

congratulations frenchy and orgelf....

@flatchoum said: Je savais bien que Mac Gyver et "l'agence tous risques" existaient vraiment, je me demandais ce qu'ils foutaient aussi pendant toutes ces années...

He also has a longer 'TEDtalk' available here http://www.ted.com/talks/marcin_jakubowski.html

Something like that So a Scale by center (or oposite point) of each face itself! And if you can keep the selection for any other function that will be marvellous! (the little reduction of the big Sphere is just an pespertive's effect) [image: DBpn_Scale_multiple.jpg] Now we have this With the Fredo Scale with a multiple selection [image: I66w_Scale_multiple1.jpg]

Thanks, will have a look!

Yes!!

My trick works only with components with no level of component inside and for rename a same component with definition name "Ball" existing in different positions as new components with of course new definitions name Ball1, Ball2, Ball3 etc... ? I suppose they must be "Make Unic" then renamed

hello: One month ago i started using sculptris. Now i will show you my third model. [image: 6025777804_0031189871.jpg] Devil Chiu 01 por artysmedia, en Flickr More, laterrrrr

Sdmitch vient de faire une variante sans fonction aléatoire intégrée! [image: 3hkk_NoRandom.jpg] 31 Lay 2012

@Simon : j'y suis allé, assez étonnants les entrailles du monstre!

Salut,merci pour l'info et pour la video(enfin du Francais)

A new and improved fbs.rb is now available. Faces in groups and components are now checked along with all other faces in the model. Since the plugin is expecting numbers to be entered for the maximum and minimum areas, an empty entry is not valid. If the "Area <" is less than the "Area >" an OR selection is made and all faces with an area less then the "Area <" value or an area greater than the "Area >" value are selected. If the "Area <" value is greater than the "Area >" value an AND selection is made and all faces with an area greater than the "Area >" and less than the "Area <" value are selected. For example, Area < 1000 and Area > 0 selects all faces with an area less than 1000. Area < 0 and Area > 1000 selects all faces with an area > 1000. Area < 2000 and Area > 1000 selects all faces with an area between 1000 and 2000. Area < 2000 and Area > 4000 selects all faces with an area less than 2000 or greater than 4000. Select Faces by Size

Yes only with these few lines, variation of the parameters, operators (*, +,/) etc... and the PNG start image, you have an infinite wold to explore!

C'est un hasard car dans la FAQ N° 90 @unknownuser said: Les concepts présentés par le Projet Venus ne sont en aucunes façons contradictoires avec la majorité des enseignements religieux du monde. Peut-être que la différence majeure est que nous aimerions transformer ces nobles idéaux en une réalité pour les nations de notre planète. Ressource, science, technologie, bien être d'abord, la spiritualité est laissé au bon vouloir de chacun mais non nécessaire! C'est "charpenté" leur bidule