Topics created by majid866

@majid866 said:

Dear Friends,

3 new rail added to MAJ Rail. You can see details in the following video. Please contact me (partban@gmail.com) if you wish to have your own rail.

https://www.youtube.com/watch?v=VVakFRvqJgU

New rail type added.

majrail.png

No need to delete anything...
I've moved this entire thread into 'Plugins'.

Hi,

Two types of doors are added to the new version (V1.0.2). These types are the front door and will be matched to Finishing Tag. These types only ope from the indoor side. You can watch its video from the following address.
https://www.youtube.com/watch?v=-K5LFfu3JO4
You can download it from the following address.
https://sketchucation.com/plugin/2402-maj_door

Best regards

Front Doors

@pbacot said:

Thank you!

May I suggest a protocol: To be able to set a default to the TOP of the window. It is more common that the tops of windows will be the same height. Then one can complete windows in a building without adjusting the setting.

I would also suggest for the size: keyboard input or tool continues to put the size of the last window that you used. Because simply clicking is inaccurate and because you often insert identical windows

I agree with you that windows should be at the same height but also I will have MAJ Door extension and for doors size from the bottom of the wall is important. I wish to have the same standard for both extensions.

Your other suggestion will have some advantages and some disadvantages. Also, it is possible to have one more click and select the height of the window. Also, I wish to keep the simplicity of extensions. Let me think more about it. I hope to hear more suggestions.

@1367 said:

@majid866 said:

دوستان لیست پلاگینهای منتشر شده در زیر آمده است.

https://sketchucation.com/pluginstore?pln=MAJ_Beam
https://sketchucation.com/pluginstore?pln=MAJ_Column
https://sketchucation.com/pluginstore?pln=MAJ_Door_Window_Cutter
https://sketchucation.com/pluginstore?pln=MAJ_Rail
https://sketchucation.com/pluginstore?pln=MAJ_Stair
https://sketchucation.com/pluginstore?pln=MAJ_Wall

چقدر عالیه این پلاگین. اینکه میشه سطح فینیشینگ رو به دیوار اضافه کرد فوق العاده س 🎉 🎉 🎉

ممنون از توجه شما. بسیاری از دوستان به اینکه میشود لایه فینیشینگ و یا اینتریور را میشود جداگانه اضافه کرد دقت نمیکنند.

@hornoxx said:

@majid866 said:

...MAJ Rail Version 0.0.2 is published. Please let me know your idea about it.
Thanks for this plugin idea and Info 👍 - where is it? I cant find it here in https://sketchucation.com/pluginstore

Extension Warehouse.

@majid said:

مهندس جان خیلی عالی بود... ممنون. جالب بود که روی شیب هم به درستی کار میکنه و هندریل بالا درست ترسیم میشه عالیه.
ممکنه خواهش کنم تنظیمات بیشتری مثل ریلهای مکس داشته باشه؟
https://knowledge.autodesk.com/support/3ds-max/learn-explore/caas/CloudHelp/cloudhelp/2017/ENU/3DSMax/files/GUID-D23202D3-5439-48ED-B973-8577770A1F98-htm.html
شاید حتی بشه روی یک خط ترسیم بشه و بعد بشه اونو منتقل کرد روی یه توپوگرافی، مثل پلاگیمن دراپ... (منظورم با اوت ایده هست) که درون صورت روی هر سطحی میشه باشه....
البته ممکنه ممکنه اون پلاگین رو تجاری بنویسید..
ضمنا یک پلاگین خوب بود به اسم فلورجنراتور که چون اسمش با اسم پلاگین همنامش در مکس یکس بود، بخاطر مساله کپی رایت، نتونست (یا نخواست) ادامش بده. بنظرم اونهم میتونه پلاگین تجاری خوبی بشه. با آپشنای بیشتر و ازین دست....

هدف من سادگی کارکرد پلاگین است. بجای تنظیمات بیشتر میشود تایپ نرده را افزایش داد. یک نمونه دیگر در عکس زیر اجرا شده ولی به دلایل فنی منتشر نشده.

Screenshot 2021-02-26 133112.png

مهندس جان با این پلاگینها کار کردم. اون پلاگین درواقع خیلی مشابه اسکین اند سوپ بابل بود با این مزیت که لبه رو هم محاسبه میکرد و اختصاصا برای سازه های غشایی بود. کروی لافت از خطوطی که بهش میدیم پوسته حاصل رو حساب میکنه و مثل فراری اسکچ یا اسکین اند سوپ بابل، فشار هوا بر روی غشا رو درنظر نمیگیره.
ممکنه خواهش کنم اونو صب کنید و ببینید چیکار میشه کرد؟

@majid866 said:

@dtroyuf said:

@majid866 said:

@dtroyuf said:

Hi, I am enjoying the Maj Stair Plugin, but I the 'X' button for breakpoints is not working with your plugin. I am working on a MAC, OS Big Sur and I am using SU2020. Have you noticed this issue before on Mac's? Or is there a way to resolve this issue. Again, I really enjoy your plugin, but not being able to make breakpoints is frustrating. Thank you! -David

Dear friend,
Please forgive me to answer you late. I solved this problem in version 0.0.3 and it is in the queue. I will inform you whenever the new version published.

Thank you for the response back. I look forward to using the updated version!!

-david

Hi, "MAJ Stair" version 0.0.3 is published now. I wish you will enjoy it.

I just tried it out, and it works great on a Mac!! Thank you for making that update, I really appreciate it!!

-David

Others are publishing the plugins in the plugins topic... 😉
https://sketchucation.com/forums/viewforum.php?f=323

@majid866 said:

... you never answer them ....

Hi Majid,

Well, sometimes I do! E.g.: now I have answered 😄

Sorry for the delay.

جناب محمودی عزیز. برای من و فکر میکنم خیلی از دوستان یادگیری برنامه نویسی جذاب هست. ممکنه در مورد تجربیاتتون در این زمینه بنویسید. منونم

@majid866 said:

@srx said:

Hello. Thank you for giving your plugin for free. It could be vary useful. My first notice is that I could not make a wall with external layer thicker than 10cm. Why this limit?

Hi, General idea is make a wall simply and close to real. I never see a wall with finishing layer more than 10CM. Also some other plugins will come after this one that will use it and I need to consider some limitation for future. You can draw 2 walls and change layer on one to "Finishing" for solution.
Best regards

😎 Lucky you. It is ☀ at your place.