Medeek Wall Plugin

medeek

You can set the framing mode of the plugin to 2D or “no framing” 3D mode on a wall panel basis or even set the default behavior in the global settings.

Once you are comfortable with your design you can switch the wall panels to the full framing mode. The no framing mode generates the wall framing as a single solid. Perhaps I need another tutorial that explains this in further detail. Switching between modes is completely automated, just one mouse click after you right click on the wall assembly(s).

The idea behind the 2D and 3D No Framing modes is to keep the model as lightweight as possible during the early design phases (ie. don’t over complicate things with framing) while at the same time providing enough information to fully understand the design and its dimensional constraints/properties.

The 2D mode is great for the initial layout but eventually one of the 3D modes will be required to fully grasp the various wall heights and possibly stacked window layouts etc…

medeek

First look at an arched door frame and (solid) door:

I think the only thing still pending is to make sure that wainscoting module can handle arched doors and then I will make this upgrade live.

medeek

Version 1.2.0 - 01.15.2019

Added (segmental and half round) arched doors to the door module.
Enabled variable king stud and trimmer stud widths for doors.
Enabled built-up headers for doors.
Enabled the trimmer extend option for doors.
Added casing "Style C" for rectangle and arched doors (gypsum wrap for interior wall openings).

I've also addressed a few minor bugs and issues with both the door and window modules.

Currently the only arched door style is a "solid" door however I can add additional styles upon request (ie. half glass, double, full glass, six panel etc...)

medeek

View models of arched doors here:

3D Warehouse

3D Warehouse is a website of searchable, pre-made 3D models that works seamlessly with SketchUp.

(3dwarehouse.sketchup.com)

3D Warehouse

3D Warehouse is a website of searchable, pre-made 3D models that works seamlessly with SketchUp.

(3dwarehouse.sketchup.com)

medeek

Version 1.2.0b - 01.16.2020

Fixed a bug with wall presets introduced with the addition of the stud spacing offset parameter.

***** CRITICAL BUG FIX *****
If you have previously installed Version 1.1.8 thru Version 1.2.0 then you will want to update your installation to this latest version. The bug was introduced into the wall presets module on 01/06/2020 when the stud spacing offset parameter was added. This bug fix should resolve that bug and allow the creation of wall presets with this latest parameter added to the list of wall parameters.

medeek

Version 1.2.1 - 01.17.2020

Added FLUSH:MITER and MITER:FLUSH option to the Wall Cladding Corners parameter.
Fixed a second bug with wall presets introduced with the addition of the stud spacing offset parameter.

The additional options for the Wall Cladding Corners parameter is specifically for situations where you encounter a wall cladding material/thickness change at an inside corner as shown.

medeek

Version 1.2.1b - 01.17.2020

Added (segmental and half round) arched double doors to the door module.

View model here:

3D Warehouse

3D Warehouse is a website of searchable, pre-made 3D models that works seamlessly with SketchUp.

(3dwarehouse.sketchup.com)

Glenn at home

Looking good Nathan!

medeek

I've been considering add an advanced option for Quoins (outside corners only):

The required parameters would probably be:

Style:
Length 1:
Length 2:
Height:
Spacing:
Thickness:
Material:

View model here:

3D Warehouse

3D Warehouse is a website of searchable, pre-made 3D models that works seamlessly with SketchUp.

(3dwarehouse.sketchup.com)

medeek

Version 1.2.1c - 01.17.2020

Fixed a number of bugs related to stacked doors, door sidelites and backward compatibility with previous versions.
Added (segmental and half round) arched half glass doors to the door module.

Half glass option per customer request.

medeek

Version 1.2.1d - 01.18.2020

Fixed the praire and perimeter grille style for arched half glass and full glass doors.
Added (segmental and half round) arched full glass doors to the door module.

It seems like there is always more with doors. The items still needing attention with the door module are:

Option for transom window above rectangular and arched doors.
Sidelites for arched doors.
Additional door types for arched doors (ie. six panel, double half glass, double full glass etc...)
Sliding doors
Pocket doors
Closet bi-fold doors

View model here:
https://3dwarehouse.sketchup.com/model/771d1d73-3aea-429f-99d8-caeb9c4c2fa3/Arch-Full-Glass-Doors

juju

@medeek said:

I've been considering add an advanced option for Quoins (outside corners only)

Keep the main thing the main thing.

medeek

@juju said:

@medeek said:

I've been considering add an advanced option for Quoins (outside corners only)

Keep the main thing the main thing.

It would actually be just another type of corner trim.

medeek

Version 1.2.2 - 01.25.2020

Added (segmental and half round) arched half glass double doors to the door module.
Added (segmental and half round) arched full glass double doors to the door module.

medeek

Version 1.2.3- 01.30.2020

Enabled up to four king and/or four trimmer studs for windows.
Enabled up to four king and/or four trimmer studs for doors.
Enabled up to four king and/or four trimmer studs for garage doors.

Eight studs deep may seem a bit excessive but it's there if you need it.

medeek

Version 1.2.4 - 02.07.2020

Fixed a bug with the gypsum wrap for rectangular and arched door openings of interior walls.

medeek

Version 1.2.4b - 02.08.2020

Added a T1-11 built-in material into the material library.
Fixed the move wall tool so that it no longer requires a negative number for offsetting to the exterior side of the wall.
Enabled the display of the offset dimension next to the blue movement arrow for the move wall tool.

The elimination of the negative offset should make the wall move tool a lot more intuitive to use. Please feel free to give me further feedback in this regard.

medeek

In some cases you may frame up something like this:

Rather than a tee intersection you have two walls forming a corner and then a third wall tying in at the corner. Currently I really don't have a good solution for this scenario since one would probably need to offset the sheathing or gypsum back where the tertiary wall ties in.

I will need to give this some further thought. Any ideas or suggestions are always welcome.

I've identified a possible bug or issue where the top plate cutout algorithm tries to cut out a zero thickness slice from the adjacent top plate in this particular scenario, I will release a fix for that shortly.

medeek

Version 1.2.5 - 02.15.2020

Enabled custom materials (Material Library) for all doors and windows: Trim, Casing, Door Frame, Door, Window Frame, Shutters.
Addressed a minor bug with multiple walls coming together at a corner.

***** IMPORTANT WARNING *****

This latest update is a necessary and major rewrite of the window and door modules. As such, this update will break compatibility with previous versions of the Wall plugin. It is highly suggested not to upgrade to this latest version for existing projects that were created with previous versions of the plugin.

medeek

Version 1.2.5b - 02.17.2020

Fixed a critical bug with the recently updated window and door edit menus.

***** IMPORTANT *****
This is a critical bug fix to Version 1.2.5. When the source code was compiled for this version the updated HTML files (window and door edit menus) were somehow not updated as they should have been. I strongly suggest that you update from version 1.2.5 to version 1.2.5b, otherwise you may not be able to edit your windows and doors.