Mini-challenge
-
I change the component axis location then it works better even with the end point.
-
@unknownuser said:
Did you take the alignment point at the end of the line?
The horizontal point of the end of the line don't work (on the right of the last red point on the blue line)
OK that works only if you take the click point under your arrey drawing! Very curious!!!
Luck ?
-
Right - now I see that it infer from itself. But I get no snapping from the end-point.
-
You have not made the last file "save as V6"
-
@unknownuser said:
You have not made the last file "save as V6"
Use free SU8 to convert back to SU6?
-
-
@unknownuser said:
Use free SU8 to convert back to SU6?
Pilou works with a Minitel.
( private joke for frenchies ) -
Ok now that work from the middle to the end of line!
The two #5 and the #4 absent were not modified !
Your method is very very tricky!
I must find a solution with the offset tool
PS My Minitel works like a charm
-
-
Gilles, you're a genius! I finally had a chance to get back to look at this and your method works very nicely. I wonder if I'll be able to remember it the next time I need it.
-
-
-
Dat is *&^$@# genius!!
nice work gilles -
-
Very clever gilles -- makes perfect sense and needs no math to execute
Best,
Jason. -
VERY clever Pilou !
Bravo to you too.Here's my slight reworking of your brilliant ideas, with some explanatory notes.
I think this way is a little simpler and easier to see what's happening.
-
@TIG
Cool but there is a little mystery
In your file (from the mine modified) tichkness is not 1.000000m but 0.997509m
CD = 1.320818 m
Or you don't change the drawing and just type the text's explanations for only the theory?In a nurbs modeler with the Technic of circle (first example of Jeff video) (with of course sames measures)
CD = 1.3239127 m & angle 40.945192°The adventure is not finished!
[flash=560,315:2erysmt0]http://www.youtube.com/v/ww17dNJt_LQ[/flash:2erysmt0]
File nurbs format 3dm
-
Gilles,
I Have no idea how you figured that out
One snaps to a line that is not there until the execution. That's wild!Peter
-
In the example, why push pull up on the face? The whole point seems to be to find Point 'B'. (diagram THAT clause
)Maybe this is beyond my maths. True: the center cut line in the first picture does describe the center of the final board, call it point 'X'. B is a right angle from 'X' but it's a right angle from the board's diagonal, not from the final axis of the board. Still it lies on the edge of the board a distance d/2 from point X?
-
Good try but...
Advertisement