[Plugin][$] RoundCorner - v3.4a - 31 Mar 24
-
Hi there a question. Does Round Corner work on Sketchup 2015 on Mac? If so, how can I install it? thanks in advance.
-
Hi there.
I have been looking through the topic but can't find any satisfying answer to my problem... I am working on Sketchup 2015 for mac and the RoundCorner plugin keeps crushing it pretty much every single time i try to use it... I have checked all my plugins and they're up to date, so is the v-ray version... Also don't have any error messages when I run the program. But all the plugin needs to crush is simply trying to select or unselect ANY line and bam - there's the bug splat... Any ideas what may be causing that? I'm running out of patience
-
Try disabling the V-ray plugin and see if you still get the crash.
-
Red Foxy, do you have v-ray for SU 2015 for Mac? could you please upload the file? I really don't find any v-ray for SU 2015 for Mac.
-
@dave r said:
Try disabling the V-ray plugin and see if you still get the crash.
Thanks for the quick reply... well, i did that, checked some edges, got all excited, added one more and well.. yeah. bug splat...
So still no solution... Will probably try unchecking and trying all the plugins one by one, maybe i'll find something responsible for that 
Thanks anyway for the suggestion...@diago said:
Red Foxy, do you have v-ray for SU 2015 for Mac? could you please upload the file? I really don't find any v-ray for SU 2015 for Mac.
Yeah, got it from the chaosgroup website
http://www.chaosgroup.com/en/2/vrayforsketchup.html -
Maybe you could post the SKP file that you're trying to run Round Corner on?
-
the whole file is quite big, unless you mean a separate component then sure, but it crashes on things as simple as a cube.. I managed to get 2 surfaces rounded however it took me like 6 attempts or something
this thing really teaches you patience.
-
What edges are you trying to round over? And what values are you using for Offset and the Number of sides?
Patience is good.
-
@dave r said:
What edges are you trying to round over? And what values are you using for Offset and the Number of sides?
Patience is good.
Just the sides of the main box and the parameters were 2mm and 2 sides.
-
OK. I just tried it on my computer and it worked fine. I only selected the front and back vertical edges and the bottom edge. How were you making the selection? Is it possible you were selecting the top edge where the round over has already been done?
-
@dave r said:
OK. I just tried it on my computer and it worked fine. I only selected the front and back vertical edges and the bottom edge. How were you making the selection? Is it possible you were selecting the top edge where the round over has already been done?
I don't think so, i just select the four vertical edges and try to run the roundcorner... As I said before, sometimes it works but it crashes on rather stupid moments such as unselecting a selected edge or something else as simple as that...
Sometimes i feel like with sketchup patience is everything
-
I quickly redrew your cabinet and then rounded over the edges on the top and sides in one go.
I double clicked with Select while holding the Ctrl key (Option on Mac) on all three sides in turn to select their edges and then ran the tool once.
-
@dave r said:
I quickly redrew your cabinet and then rounded over the edges on the top and sides in one go.
I double clicked with Select while holding the Ctrl key (Option on Mac) on all three sides in turn to select their edges and then ran the tool once.
[attachment=1:358glolk]<!-- ia1 -->Screenshot - 12_19_2014 , 4_51_30 PM.png<!-- ia1 -->[/attachment:358glolk][attachment=0:358glolk]<!-- ia0 -->Screenshot - 12_19_2014 , 4_53_49 PM.png<!-- ia0 -->[/attachment:358glolk]
Hmmm... however tempting redrawing around 60 different pieces of office furniture is
I have been encountering this problem with other objects before while working on a completely different project, so from that I take it's rather the issue of program/plugins incompatibility rather than the objects themselves... Thank you very much for trying to help, I suppose this problem is gonna stay unsolved for now, will definitely have to run all the plugins separately to see which one may be causing the errors.. -
@unknownuser said:
Just the sides of the main box and the parameters were 2mm and 2 sides.
Prefer to work in Scale *100 and at the end Scale /100
At this Scale (mm)Sketchup don't like very tiny segments, surfaces... -
Pilou, at this scale SketchUp rounded over the corners just fine and filled in all the face on my installation.
-
@pilou said:
@unknownuser said:
Just the sides of the main box and the parameters were 2mm and 2 sides.
Prefer to work in Scale *100 and at the end Scale /100
At this Scale (mm)Sketchup don't like very tiny segments, surfaces...Thank you for the suggestion but that was never an issue for me... worked completely fine in 2014.
-
RedFoxy, do you still have 2014 installed?
You can just open 2015 and 2014. Open your file first in 2015. Then in 2014 (it will say it will have to open as read only). Then round corner the objects you want in 2014 and copy to the main file in 2015 (saving once in a while in 2015).
-
Hello Fredo,
can't thank you enough for all your plugins!!! Donate folks!! At the end of the day
we will have to open our refrigerators door - isn't it?I have a question:
When inspecting the icons for 'RoundCorner' I stumbled upon one which is labeled 'CustomProfile'.
It however don't seem to be implemented. Did you work on this as well?
...absolutely amazed by your work and with maximum respect
Klaus
-
@define said:
When inspecting the icons for 'RoundCorner' I stumbled upon one which is labeled 'CustomProfile'.
It however don't seem to be implemented. Did you work on this as well?
Klaus,
Custom profiles (based on a quarter definition of profile) is something that I have included in the code, but I would need to build a kind of GUI to activate it in the script.
see http://sketchucation.com/forums/viewtopic.php?f=323%26amp;t=20485%26amp;start=30#p172163
Fredo
-
@unknownuser said:
Custom profiles (based on a quarter definition of profile) is something that I have included in the code, but I would need to build a kind of GUI to activate it in the script.
Please do.
Another small request.
Would it be possible to make the scripts create quads only? As it is now it also creates triangles.
Advertisement