[Plugin][$] RoundCorner - v3.4a - 31 Mar 24

josegara

You are god my friend. A brutal tool

josegara

Sketchup owes you

ITman496

Hello, I've been a loyal user of this tool for a very long time, great work!

I've been trying for a long time to get it to sort of.. maintain a radius when rounding a corner. For example, I'm trying to set up a part and calculate pocket cuts of a CNC machine's endmill, when it can't accurately do an interior corner because of the size of the endmill. When I round with say a 1/8" radius, it seems to do a non-circular rounding when doing anything other then 90 degrees. Is there a solution for this? Doing it manually sucks

Here is a picture for an example. I want the right's inner bends, but the plugin instead gives me what's on the left.

Dave R

I've never noticed that but you're right.

@itman496 said:

Is there a solution for this? Doing it manually sucks

At least for now you could use TIG's 2D Fillet from his 2D Tools set.

fredo6

ITman496 made a very relevant observation.

Indeed this concerns borders where the edge angle is different from 90 degrees.

In RoundCorner and FredoCorner, the offset is measured perpendicularly to the borders, along their faces.

Corner - Radius 1.png

As a result, the rounding is not a circle, but it is scaled to be tangent at faces. All pictures below generated with an ofset of 1.5 m and a Circle profile.

Corner - Radius Off.png

However, there is another possibility, which is to make the rounding so that it matches a circle with a radius equal to the offset value

Corner - Radius 0.png

Corner - Radius - On.png

This is a matter of choice indeed, so it has to be an option, which I am implementing in FredoCorner.

Below are the same solid rounded with the two options

Corner Radius - All - Face.png

Corner Radius - All - Radius.png

As far as I remember, I discarded the radius mode because it gives border rounding which are visually non uniform. But, the option is valid geometrically, especially if it is to generate the shape for 3D Printing.

Fredo

Dave R

Thank you for that explanation, Fredo. I'm happy to know it'll be a feature in FredoCorner.

fredo6

Dave,

It should be possible in FredoCorner (but more complex in RoundCorner).

Again, the result is visually different

Corner Radius Pyramid.png

ITman496

Thank you so much Fredo! My years of suffering are over!

I can't wait for the update to fredocorner!

And Dave, I will try 2D tools. Thank you!

fredo6

@itman496 said:

Thank you so much Fredo! My years of suffering are over!

I can't wait for the update to fredocorner!

I'll publish it later today.

here is the video

https://www.youtube.com/watch?v=dFzyPx04MY0&feature=youtu.be

Dave R

Wow! Very good.Thank you!

fredo6

NEW RELEASE: RoundCorner v3.3a - 18 Dec 18

Requirement: LibFredo6 v8.7a or above

RoundCorner 3.3a is a maintenance release.

Home Page of RoundCorner for information and Download.

Main post of this thread.

oyercab

Hello,
About two weeks ago I received an error message about RoundCorner when starting Sketchup 2018 Pro. I didn't save the message, and don't know exactly what it said, but RoundCorner was no longer available. I'm on macOS High Sierra (can't upgrade any higher). I updated Fredo6 to the latest version, restarted Sketchup, and then updated RoundCorner and restarted. The toolbar appears, but is completely unresponsive. I also tried installing FredoCorner. Its toolbar has never appeared, but I can put the icons in my main toolbar. It is also unresponsive.

In the "Fredo6 Collection" under Tools both RoundCorner and FredoCorner are showing, along with their menus, but I can't do anything with them. I've been using RoundCorner for years, and can barely function without it (many thanks, Fredo). Please, somebody help!
(I did install through Extension Manager in Sketchup).

Thank you, and hope everybody had a Merry Christmas.

fredo6

@oyercab

You seem to use Sketchup 8. Can you confirm?

Can you open the Ruby Console, and check for error message when you launch RoundCorner.

Thanks

Fredo

oyercab

@fredo6 said:

@oyercab

You seem to use Sketchup 8. Can you confirm?

Can you open the Ruby Console, and check for error message when you launch RoundCorner.

Thanks

Fredo

Hello Fredo, I use SU2018 Pro. I did open Ruby Console, and the LibFredo6 plugin seems to be the problem. I installed the latest version through Extension Manager and followed instructions carefully, closing and re-starting Sketchup before installing RoundCorner. I then closed and re-started before installing FredoCorner. As I said, the toolbars and icons are there, but they don't do anything.

This problem started suddenly, after I had been away from the computer for a week. When I launched SketchUp, the error message about RoundCorner was on the screen, and its toolbar had disappeared. I'm going to try deleting and re-installing LibFredo6 again, but have already done that several times. Can I post the Ruby Console info here if I have no luck?

fredo6

@oyercab said:

@fredo6 said:

I did open Ruby Console, and the LibFredo6 plugin seems to be the problem.

Could you copy - paste the errors you see in the Ruby console.

oyercab

Error: #<Errno::ENOENT: No such file or directory @ rb_sysopen - /Users/21imac/Library/Application Support/.LIBFREDO6_DATA_Dir/LibFredo6_all_defaults.dat>
/users/21imac/library/application support/sketchup 2018/sketchup/plugins/fredo6_!libfredo6/lib6registry.rbe:144:in initialize' /users/21imac/library/application support/sketchup 2018/sketchup/plugins/fredo6_!libfredo6/lib6registry.rbe:144:in open'
/users/21imac/library/application support/sketchup 2018/sketchup/plugins/fredo6_!libfredo6/lib6registry.rbe:144:in write_to_file' /users/21imac/library/application support/sketchup 2018/sketchup/plugins/fredo6_!libfredo6/lib6registry.rbe:127:in store'
/users/21imac/library/application support/sketchup 2018/sketchup/plugins/fredo6_!libfredo6/lib6plugin.rbe:1278:in usage_use' /users/21imac/library/application support/sketchup 2018/sketchup/plugins/fredo6_!libfredo6/lib6plugin.rbe:1266:in command_invoke'
/users/21imac/library/application support/sketchup 2018/sketchup/plugins/fredo6_!libfredo6/lib6plugin.rbe:1249:in block (2 levels) in build_config_commands' /users/21imac/library/application support/sketchup 2018/sketchup/plugins/fredo6_!libfredo6/lib6traductor.rbe:1348:in call'
/users/21imac/library/application support/sketchup 2018/sketchup/plugins/fredo6_!libfredo6/lib6traductor.rbe:1348:in block in add_command' SketchUp:1:in call'

fredo6

It seems you may have some restriction (security-based) to create subdirectories in /Users/21imac/Library/Application Support/.LIBFREDO6_DATA_Dir.

Possibly, this has to do with the mode of your finder, which may require "View Hidden files".

Can you check.

Worse case, create the directory manually: /Users/21imac/Library/Application Support/.LIBFREDO6_DATA_Dir.

Please note that there is a 'dot' before LIBFREDO6_DATA_Dir. On Mac, I think this to make the directory hidden.

oyercab

The directory is there, but it is hidden. I was able to see it by opening Terminal. Now what should I do? (The dot does make it hidden.)

fredo6

@oyercab said:

The directory is there, but it is hidden. I was able to see it by opening Terminal. Now what should I do? (The dot does make it hidden.)

Could you enable the option "view hidden file" in your Finder.

In the Terminal, type
defaults write com.apple.finder AppleShowAllFiles YES; killall FINDER

If it does not work, then it would mean that your Support folder is protected against file creation by program, and then you'll have to find how to allow it via changing some security settings.

Fredo

oyercab

@fredo6 said:

Could you enable the option "view hidden file" in your Finder.

In the Terminal, type
defaults write com.apple.finder AppleShowAllFiles YES; killall FINDER

If it does not work, then it would mean that your Support folder is protected against file creation by program, and then you'll have to find how to allow it via changing some security settings.

Fredo

When I did that, I got this response "No matching processes belonging to you were found."
But I can see the folder by typing the following two lines, one at a time:

defaults write com.apple.finder AppleShowAllFiles TRUE

killall Finder

What should be inside that hidden folder? It only contains a folder named DefaultParameters,
which has two files: FredoCorner.def and ROundCorNer.def (spelled just like that)

Gail