[Obsolete] BZ__Arc for BezierSpline 1.2

xrok1

right click on them here and choose save as.

idraft

MALAISE

An another helpful plugin made in Fr(edo6)!
MALAISE

watkins

Dear Frodo,

Can your Plugin be used used in X, Y and Z? This is just the type of Plugin that one would use for pipe and wiring runs. An option to draw the lines by inputting the X,Y and Z co-ordinates as well as drawing the lines free-style would be great.

Like all those that have replied, I greatly appreciate your skill and generosity.

Kind regards,
Bob

fredo6

@boilingsnow said:

Great!!!
Maybe even better if one can define the segment number by himself.

Just type the number followed by 'S' in the VCB.
This of course is by refreence to a full circle, because there is no need to use a lot of segment for a very open angle.
By default this 'Precision parameter' is set to 24, which is the usual default for Sketchup circles.

Fredo

fredo6

@watkins said:

Dear Frodo,

Can your Plugin be used used in X, Y and Z? This is just the type of Plugin that one would use for pipe and wiring runs. An option to draw the lines by inputting the X,Y and Z co-ordinates as well as drawing the lines free-style would be great.

Like all those that have replied, I greatly appreciate your skill and generosity.

Kind regards,
Bob

The plugin works in 3D, as all the BezierSpline extensions.

For drawing the polyline, I think you have full freedom to use the tool you like, then make it a Sketchup curve (by Weld), and then convert it to a Round Corner polyline.

Fredo

thomthom

"Sketchup Fredo Edition"

Burkhard

It is great and usefull, even for filet. Just draw the rectangle , weld it et voilà

Chris Fullmer

I like that Fredo is now making plugins for his plugins

Chris

watkins

Dear Fredo,

I just tried your plugin. Brilliant! It does pipe runs beautifully when used with pipe along path.

Thanks once again!

Kind regards,
Bob

gaganraj

everytime i try to leave SU....i just get dragged back.

i'm unable to download the icons. For some reason there is no download link?

boofredlay

Context click on the image itself and save as...

jmmad

Fredo6
what i like most of your script BezierSpilne is that the endpoints are intelligent and editable, you can move those points and the equation result for the geometry is auto updated, you can set the number of edges etc...
So i have 3 request that i think it would be very useful.

1.-Would it be possible to transform a normal set of SU lines to an editble polyline or bezier?
2.-And to transform a BZ polyline to BZ Arc or any other Bezier and back?
EDITED: ive notice you had those 2 option . I should go to my oculist.
When i go from BZ arc to Polyline would it be possible to get the primitive geometry and nont the points that make the arc?

Ill try to explain this request...this i think it's more complex.
Ive notice in your BZ plug in when you PushPull a closed BZ Spline or polyline surface, the BZ lines are copy, then you can edit the top and the bottom and edit somehow the geometry of the volume with the BZ edit command.
But if i move a point in the top BZ polyline the point on the bottom polyline does not follow because its not related to the bottom spline.
Editable PolyVolume.jpg

3.-Could it be posible to relate points between 2 or more "BZ polylines" maybe by an invisible vertex? So when you drag that vertex the the 2 or more beziers are modified at the same time. So if you have a volume made of an extruded BZ_Arc or spline you move this vertex and the geometry follows and not only the lines but the volume itself is updated. This will give more control over volumes just as you did with the 2d lines. With your talent you gave endpoints in SU properties that can be edited. Maibe that could be done with volumes.
So this "inteligent vertex and endpoints could tell how the visible geometry should be.
Uff... this is hard to explain for me.
I hope you can follow mi idea.

CadFather

..and icons if needed.

EDIT: strange my bezier tools have completely stopped working on SU7

dtrarch

Fredo

Super useful and thanks a bunch.
A really helpful road layout tool that will be used a lot.

Question please.
What does offset reference ?
Arc radius ? Arc segment ? or ?

Thx again

dtr

fredo6

@dtrarch said:

Question please.
What does offset reference ?
Arc radius ? Arc segment ? or ?

Offset is the distance from the corner to the start of the arc.
You will notice that when the length of one of the segments defining the corner is not superior to twice the offset value, no round corner is generated.

dtrarch

Fredo

Thanks for the reply and again the really useful tool.

dtr

CadFather

Hi Fredo, i could be wrong but it seems BZ 1.2 only works with the default su7 installation

if i have SU installed in a different folder the tool will start but it will not draw a line upon clicking..

(i have multiple copies of SU one for working, one for experimentation)

david_h

Cool Plugin. thanks.

D

PS. I think we need a smilie emoticon of hands clapping in thunderous applause for just these types of occasions.

fredo6

@cadfather said:

Hi Fredo, i could be wrong but it seems BZ 1.2 only works with the default su7 installation

if i have SU installed in a different folder the tool will start but it will not draw a line upon clicking..

(i have multiple copies of SU one for working, one for experimentation)

You are right. BezierSpline asumes it is located in the default Sketchup Plugin folder.
For FreeScale and LibFredo6 I have arranged to support alternate folders however, provided you configure Sketchup for an alternate folder (via script acting on $:).
When I refresh Bezierspline, it should work.

Fredo