Joint Push Pull Classic (Old version) - v2.2a - 26 Apr 17
-
[EDIT] daniel posted the latest update while i was typing this reply.. iconsformac2 are correct..
i switched to the first icons and they worked ok..
the new pngs display as sharp in all other apps except sketchup.. i compared the blurry ones against the sharp ones in PS and found the image sizes are different.. i changed the blurry J & V files to the following size..
..and now the new icons look ok..
it's a strange thing to me because the new icons are all 24x24 px.. it's just the resolution and wxh are set different but i would have thought they would display on a monitor according to the pixel size alone..
fwiw - the blurry icons are set to 24 x 24 px... .08 x .08 inches .... resolution 299.974.. -
M-m-m-many thanks to Fredo6 ! very conveniently! ...
...and let's write it in the end in "jointpushpull.rb" :
#------------------------------------------------------
UI.add_context_menu_handler do |menu|
menu.add_separator
menu.add_item("Joint Push Pull ") { JointPushPull.execute 'J' }
menu.add_item("Vector Push Pull ") { JointPushPull.execute 'V' }
menu.add_item("Normal Push Pull ") { JointPushPull.execute 'N' }
menu.add_item("Undo") { JointPushPull.undo }
menu.add_item("Redo") { JointPushPull.redo }
end
#--------------------------------------------------------------....right click mouse we select the face and activate skript board Simultaneously :stuck_out_tongue: ...Process of drawing will be faster! :tada:
-
Urgen,
Very good idea and quite natural in Sketchup.
I updated the files in the script repository (also with non blurry icons).
http://www.sketchucation.com/forums/scf/viewtopic.php?f=153&t=6708&p=42783#p42783Thanks
Fredo
-
There is a bug in the latest version there should be a ] in this line:
menu.add_item(Traductor[DLG_MnuRedo]) { JointPushPull.redo } -
Oops...!!
Updated with correct code in Ruby repositoryFredo
-
@unknownuser said:
@unknownuser said:
Is it possible for this script to explode the curve after it is run? Or at least segment it into parts. It would cut down on a step if you are trying to erase lines for a cleaner face. See image.
I put precisely some code to keep curves on the original surface (to be as less destructive as possible). Note however that the generated corresponding contour is not welded as a curve. Is it the situation you have?
The generated contour is not welded correct.
The original is however. I did another test after installing the latest and I get conflicting results. The top ellipse is broken into 2 welded curves that do not correspond the the new JPP created. The bottom ellipse stays completely intact.
See images.
Again, thanks for this script.
-
Coen
If you scale uniformly a surface, it will never match the original (think of a sphere for instance). However, this is somehow an approximate way to offset its contour, while preserving the overall shape of the surface.
With the first method (only offset the borders), you just use the shape of the outer borders and ignore the ones which are inside. So if you offset by a large distance, you will certainly 'dilute' the shape of the surface.
Both methods have their own benefits and drawbacks, and both can be implemented via a script.
That's what I meant.
Fredo
-
where is this offset tool?????
-
beautiful, Fredo... simply fantastic. Thank you so much for your generosity in sharing!
-
Thanks for a great script.
-
...Here I have applied this script, very pleasant in work.... Thanks once again!
-
Thanks fredo for this wonderfull new tool. Works like a charme and with the use of the icons it seems like if they have always been part of the original program. GREAT scripting !!!
erikB -
WOW!!
All my SU life i've been waiting for this!
Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You
-
I must add by belated THANKS!!! Fredo for this super, great, etc. tool. As usual, I am a bit late finding such gems, but glad I found it now since next week I will be working on a curvy building project that will now be much easier to model.
Glad to "bump" this file up to the top of the list so maybe more late comers can find it.
Spectacular job - again - many thanks
-
Awsome, yet another great tool for creating things like stairs. And the ofset tool for the curved surfaces would be great too.
-
Great tool the normal push pull reminds me of the extrude tool in Wings 3d which i've always liked.
-
I have just used this Ruby to create a lavender hedge on to of contour grass mounds.
It has saved me days (well maybe hours) in time.
Thanks Mate
Toby
-
wooooow, i want that offset tool :-O,it s a very usefull tool,until this i have to do the contour by hand on curved surfaces. U*re the man!!!
UPDATE After searching i realised that isn t done yet,but i ll wait for it
-
Cher M. Fred,
Your script is awesome. But, I've installed it but it seems to be crashing everytime on my mac. Not sure what I am doing wrong. I got the old version to work fine. This new one - 20 Feb 2008 - loads, icons are crisp and beautiful. I select a face, pull it out - even just one face - and then, progress bar pops, looks nice ... freeze ... pause - su disappears. ;(
Has anyone else seen this? I am running su pro 6/ mac leopard/ intel 2.4mhz/ 3GB ram .... ? What to do?
Perhaps it is my installation ... ?Happy for any advice.
Merci bien en avance et best from Berlin,
Jason
-
Thinkbuild,
I did not test the version on Mac as I have no Mac myself, but I guess there are other users on this platform.
I did not have reports on crash either since I published the script, but that does not mean nobody had any.
The best at this stage is to post the model so that we can have a look
Advertisement