[Plugin] FredoBend - v1.3b - 04 May 26
-
I just ended the french translation of the LibFredo6 15.9a messages.
And FredoBend v1.2c too.
How to send you the result "LibFredo6_FR.lang" + "FredoBend_FR.lang" please?Many thanks. I am lazy to do it.
Just PM the .lang files to me on this forum.
For LibFredo6, this is useful.
For FredoBend, I did not make it translatable yet, until I finish the other features. So, the translation is uncomplete. -
This post is deleted! -
This post is deleted! -
This post is deleted! -
I did not make it translatable yet
But made here :
-
Top-notch @fredo6 the addon run very well now! Thks a lot and congrats.
-
There is a new video on FredoBend by TheSketchupEssentials.
-
Awesome plugin! I downloaded both the plugin and library and get this error when trying to bend items.
Date: 31-Mar-26 16:58:45 - SU2021.0 - LibFredo6 - v15.9a
An error occurred in FredoBend Along Curve
Error in Bend Generationundefined method `glued_to' for #<Deleted Entity:0x54da1088>
fredobendcurvealgo.rbe: 199 -- tolid_prepare
fredobendcurvealgo.rbe: 133 -- tolid_construct_mono
fredobendcurvetool.rbe: 2402 -- generation_step_replica
fredobendcurvetool.rbe: 3200 -- job_perform
fredobendcurvetool.rbe: 3139 -- job_notification
body_lib6webprogress.rbe: 104 -- call
body_lib6webprogress.rbe: 104 -- process_notify
body_lib6webprogress.rbe: 388 -- fast_process_next_step
body_lib6webprogress.rbe: 358 -- fast_process_start
body_lib6webprogress.rbe: 370 -- fast_process_next
body_lib6webprogress.rbe: 397 -- fast_process_end
body_lib6webprogress.rbe: 383 -- fast_process_next_step
body_lib6webprogress.rbe: 391 -- fast_process_next_step
body_lib6webprogress.rbe: 358 -- fast_process_start
body_lib6webprogress.rbe: 370 -- fast_process_next
body_lib6webprogress.rbe: 346 -- fast_process_top
body_lib6webprogress.rbe: 123 -- invoke
fredobendcurvetool.rbe: 3085 -- job_start
fredobendcurvetool.rbe: 2341 -- block in generation_launch -
Would you have the model, because I don't understand how the error can happen. Thanks
-
NEW RELEASE: FredoBend v1.2g - 01 Apr 26
Requirements
- LibFredo6: v15.9a or above
- Sketchup version: SU2017 and above
FredoBend 1.2g is a maintenance release including:
- Bug fixing for SU versions prior to SU2021.1
Home Page of FredoBend for information and Download.
-
@fredo6 Just checked it out, It works now! I am soo happy to have an extension like this for my line of work. Thanks for all of your hard work and dedication!!
-
NEW RELEASE: FredoBend v1.2k - 09 Apr 26
Requirements
- LibFredo6: v15.9a or above
- Sketchup version: SU2017 and above
FredoBend 1.2k is a maintenance release including:
- Bug fixing related to replicas
Home Page of FredoBend for information and Download.
-
NEW RELEASE: FredoBend v1.2l - 10 Apr 26
Requirements
- LibFredo6: v15.9a or above
- Sketchup version: SU2017 and above
FredoBend 1.2l is a maintenance release including:
- Major bug fixing related to directions
Home Page of FredoBend for information and Download.
-
NEW RELEASE: FredoBend v1.3a - 01 May 26
Requirements
- LibFredo6: v15.9a or above
- Sketchup version: SU2017 and above
FredoBend 1.3a is a major release including:
- Introduction of the Circular Bend tool
- Adjustment of the bending algorithms
- Bug fixing
- Other evolutions
Circular Bend: Overview
Home Page of FredoBend for information and Download.
-
NEW RELEASE: FredoBend v1.3b - 04 May 26
Requirements
- LibFredo6: v15.9a or above
- Sketchup version: SU2017 and above
FredoBend 1.3b is a maintenance release including:
- Bug fixing for Circular Bend tool
Home Page of FredoBend for information and Download.
-
Hello!!
I am a user from Greece. Thanks for this amazing plugin.
Nevertheless I noticed that Circular bending deforms a little bit the object which I think is not convenient for the accuracy I don't know, is this a bad handle by me or is a small bug in the code? (I attach a screenshot trying to show what I mean).
Thanks for your attention in advance!! -
This is a choice you have to make.
There is a thread on this question in the Sketchup forum.
In your case, you can play with this parameter (Offset Mode)
-
@fredo6 Hello!!
Thank you very much for the instructions. I choose Vertex-to-Vertex end everything is fine. Now I Know that I have two options to use.
I saw the topic in the forum and I somehow understood the mechanism of bending, and the difficulties that appears.
Thanks again! -
@fredo6
I think it's best for a bent object's geometry to follow a 'curve' and start perpendicular to the start/end segment. But if the path is a full circle the bending should start perpendicular to a mid-segment, to keep the objects 'endmost' dimensions correct: and if it's around an arc [partial circle] that's user-defined it should be treated like any other curve: but if it's a swept form around a notional partial-circular path, that should then start/end perpendicular to a half-segment - that way the bent form stays as dimensionally true as it can be.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
Advertisement